4.36Mb (388 downloads)
This folder contains textures only for the Douglas C-47 basepack for FS9 by Manfred Jahn and colleagues as C-47 serial 43-15073, built by Douglas in 1944. Special thanks at Jan Kees Blom for permitted me to adapted this Repaint.
Posted Apr 29, 2018 12:00 by bruno munier
22.92Mb (1133 downloads)
The Fw 58 was a low-wing monoplane with two piston engines mounted in nacelles on the wing leading edges. The crew sat under an enclosed canopy. Aft of the flight deck, the fuselage was open to form a moveable machine gun station. The tailwheel undercarriage was retractable. The Fw 58 was widely used for training Luftwaffe personnel. It was also used as a VIP transport, ambulance, feeder airliner, photo reconnaissance, and weather research aircraft. It was built under license in Bulgaria, Hungary and Brazil. It was also operated by several countries such as the Netherlands, Romania, Croatia and Turkey. This is an FSX panel update for the Focke Wulf FW 58, previously designed for FSX by A.F. Scrub. The package includes a wheeled and a float version of the aircraft. Both the new entirely remodeled and enhanced VC and the 2D panel are now equipped with all authentic German gauges. smoke and VC light added. The wheeled variant's engines are now automatically fired off on the runway. All credits go to A.F.Scrub for the original model, new VC, gauge configuration as well as smoke and vc light by Michael Pook. This is the whole aircraft.
Posted Apr 28, 2018 09:44 by Michael Pook
37.57Mb (2133 downloads)
FSX/P3D>v4 Curtiss A-25A, SB2C-1, SB2C-4, -4E, -5 Helldiver Revised and updated. previous version did not have a functional VC so I added the best - Milton Shupe Vultee VC. Added sounds. Also fixed crash on takeoff. FSX native, MDL X materials and animations, several new models, radar options, bomb, rocket, torpedo and glide bomb features. See readme for details, operational features and credits. Sound current aliased to Howard 500X-an excellent sound pack. Original package by Wolfgang "Wolfi" Faber. Thanks to LLS for the FSX native conversion. Andre Luddick for some texture updates. Other updates by Chris Evans. Tested in P3D4 but should be fine in FSX and earlier P3D versions. IMPORTANT!! ---->>> Use only gentle (c. 50% approx) throttle during takeoff (over 80K (MPH) and increase gradually after takeoff. Otherwise you will crash this powerful aircraft.
Posted Apr 20, 2018 09:07 by chris evans
6.23Mb (1421 downloads)
This is a panel update for the Supermarine Spitfire Mk VbTrop, recently uploaded by A, F. Scrub. Thanks to him for that terrific model but the panels needed some updating. New gauges and gauge configuration for both the VC and the 2D panel give them a more detailed appearance and the VC has been entirely newly designed. New VC and gauge configuration by Michael Pook.
Posted Apr 16, 2018 11:17 by Michael Pook
17.16Mb (1354 downloads)
FSX/P3Dv3/v4 Spitfire Mk VbTrop The basic Mk V was a Mk I with the Merlin 45 series engine. This engine delivered 1,440 hp (1,074 kW) at take-off, and incorporated a new single-speed single-stage supercharger design. Several Mk I and Mk II airframes were converted to Mk V standard by Supermarine and started equipping fighter units from early 1941. The VB was the first production version of the Spitfire to use "clipped" wingtips as an option, reducing the wingspan to 32 ft 2 in (9.8 m).The clipped wings increased the roll rate and airspeed at lower altitudes. Native FSX/P3D GMAX model by A.F.Scrub
Posted Apr 15, 2018 04:45 by A.F.Scrub
18.07Mb (852 downloads)
FSX/P3D v3 Hurricane two seater The Hurricane was a big leap forward in performance compared to biplanes such as the I-152 in service when the Germans attacked. The Hurricane also handled differently to equivalent Soviet designs and as a result the Soviets asked for a two-seater trainer version very early on.Ten Hurricane Mk.IIs were selected for conversion which involved removing the armour behind the original pilot seat and effectively fitting a duplicate cockpit complete with second windscreen. Having gained experience building the two seat trainers the Soviets went about converting the aircraft with a second position behind the pilot for an observer who faced rearward and was thus not as obstructed by the aircraft’s wing when looking down as the pilot was. These aircraft never had full canopies fitted to them which as well as making them extremely cold in the harsh Soviet weather also caused buffeting problems at high speeds. FSX/P3D native GMAX mdl by A.F.Scrub.
Posted Apr 3, 2018 08:34 by A.F.Scrub
20.86Mb (1301 downloads)
FSX/P3D Hawker Hurricane The Sea Hurricane Mk IA were Hurricane Mk I modified by General Aircraft Limited. They were modified to be carried by CAM ships (catapult armed merchantman) and called Hurricats, they could not be landed on the ship after their mission. The Hurricane Mark IIC modified with catapult spools and arrester hook were known as the Hooked Hurricane and were real carrier born fighters. FSX/P3D native GMAX model by A.F.Scrub.
Posted Mar 26, 2018 03:27 by A.F.Scrub
71.36Mb (1207 downloads)
The two packages that are contained in this offering was previously offered in 2 seperate packages, but for ease of distribution I've now combined these. I also did the following: 1. The aircraft.cfg files were tweaked. 2. Many textures were improved/corrected, they now sports the relevant stencilling as is applicable to the type. 3. The previously incorrect textured wing cannon issues that showed up on these models due to incorrect textures were also fixed, now all of these are case-specific to each of the related Helldivers as these are now colour-coded for the respective aircraft concerned. 4. The wheel-rims are also corrected and much more crisper. 5. The prop-blade textures was also improved.
Posted Mar 26, 2018 03:24 by Andre Ludick