This is pack 1 of 3 of C-130 firefighting variants. This pack contains 4 models and 9 repaints total. They represent the C-130H, C-130E, EC-130Q, and HC-130H. The Coulson equipped gravity fed RADS XXL tanks are in the C-130H, EC-130Q, and HC-130H. The 4th included model is the older MAFFS I system installed in a military C-130E. The system is retired in the USA for the MAFFS II system, but other countries do operate this palletized firefighting system in their military C-130s. MAFFS was developed for operators such as the US military, did not have to permanently modify their C-130s for firefighting operations. The system was a roll-on-roll-off system. RADS equipped C-130s can carry up to 4,000 US Gallons with their gravity fed system and modified airframe, while the MAFFS I and II systems are limited to 3,000 US Gallons due to the weight of the pressurized and palletized drop system. This is a component based modification for the stock P3D C-130s. So specified files from those aircraft are needed to complete these variants. Packs 2 and 3 will also consist of the same modification strategy. Detailed readme is included. I have added the unique features that distinguish these variants from one another as well as installed the tank systems in them and added PBR to the models for use in P3Dv4, 5, and 6. Textures included are all of Coulson's fleet of C-130s, Cal Fire T-116, and MAFFS 6 from the 1990s for the the California Air National Guard. These models are not compatible with FSX, but the textures are. Cal Fire paint by SATO community member "Delta," Coulson Textures by Nicholas Mitchell "Scorch00," and Jeremy Ulloa "tankerguy72" tanker conversions by Nicholas Mitchell.

NEW V.3 (completely redone from scratch). Textures for the freeware Flysimware C182K,(N2627K) with red colors, white wings, original stripes, black engine cover and 3 types of vertical tails...V3: A completely clean version is now included. (they are inside the texture folder. read the instructions). "Toned down" VC: Cockpit colors were toned down. In addition: new optional panel (adds the compatible default RADIO and GPS). V3 fix: Fixed a nighttime texture issue in the VC. all credits for Flysimware.

This is the fantastic Douglas DC-4 originally done by Jens B. Kristensen. Whom has given me the permission to modify his wonderful aircraft and update these particular versions for use in P3Dv4+. The models have been updated with new sounds, external models to represent 3 different versions of the DC-4/C-54 airtankers, PBR added, and updated 4k textures across the board. Operators Aero-Flite, Aero Union, Ardco, Buffalo Airways, and TBM are represented in the pack across 10 repaints. The DC-4/C-54 was one of the most prolifically used airtankers in the industry in the United States, they served from the 1970s until 2007 despite many years of life still left in them. Some never moved from their offseason homes and were scrapped, while smaller numbers were sold off and turned into rural cargo/fuel haulers, and transports. An even smaller number continued flying as airtankers. Buffalo Airways as of 2023 still has DC-4 tankers. Of the unique models that are represented here, one special version is known as the DC-4 'Super.' The Super was a specially modified DC-4 only two were ever made and only one lived on. It became owned by Ardco. This DC-4 was modified with R2600 engines instead of the R2000s equipped on the standard variant. The limited amount of time and engineering to this upgrade left it functioning, but not to it's full potential. The propeller was retained from the R2000 which resulted in the engine RPMs being limited. Despite the R2600s, the Super was not faster than a standard DC-4, however, the big notable difference was in climb performance. And in many hot and high density altitude operations in the hot western United States, the DC-4 Super had an advantage over the standard DC-4 in terms of useable power. With a decent carriable load of 18,000 LBS or around 2,000 US gallons of retardant. The DC-4/C-54s could operate even off the shortest air attack bases, largely leading to why it was so prolifically used in aerial firefighting. Original Aircraft by Jens B. Kristensen, modifications by Nicholas Mitchell "Scorch00"

Modifications are made for, again, a wonderful created Piper aircraft by Rien Cornelissen. This time it concerns the Piper Arrow-IV PA-28T-201 aircraft that Rien made in 2008. At first I hesitated on doing modifications on this Arrow IV as it did look great and performed well. Also the VC of Rien is nice but after some testing I did not like the lights configuration of the aircraft in Prepar3D. Then I thought it would be nice to give Rien's VC an even more 'old school' look... So here I started to make a mod of the Arrow IV. It will be my last one of Rien's creations. The modifications consist of some recoded gauges, some new gauges, an enhanced Bendix King Auto Pilot, reference and checklists kneeboard files, four expandable gauges and Cockpit sounds. An extra panel was created with a Garmin GNS530 in VC. Stock Bendix King Radio gauges are replaced with equivalent ones by ones created by Pierre Fasseaux. Further improvements concern aircraft lights and aircraft lights management. Finally three new liveries are provided. For a full list of modifications and a credits list see file: Piper ArrowIV_RC_mod.pdf in the 'Docs' folder of the aircraft. This package has only been tested okay in Prepar3D v4+ However I have included panel configurations for FSX users. See INSTALL.txt for help if needed. Happy days and happy flights. Apologies for my previous incomplete upload.

Native FSX Piper Arrow III PA-28R-201, non-turbo variant. Models by Rien Cornelissen. I did use the Arrow III PA-28R-201, non-turbo variant package, Arrow-3.zip by Rien to create a native FSX Piper Arrow III PA-28R-201 non-turbo, which Rien did not release as FSX native variant. I did use from Arrow-3.zip the data in the aircraft.cfg and did use the .air file from it. I then did use the external and internal models of the turbo variant Arrow III PA-28R-201T. I also did use the original panel from the Arrow-3.zip by Rien and except for 2 missing gauges it loaded straight in Prepar3D v4+ where it did perform well. Created a new extra panel with some enhanced gauges by Pierre Fasseaux. Created two new panels based on panel above with beige and blue colored VC front panels. So now there are four different panels. As Rien did, aircraft sound is aliased to the stock Mooney Bravo. Added are three liveries of which one completely new. More info and credits list in file Piper Arrow III PA-28R-201_mod.pdf. Happy flights.

Piper Archer-III PA28-181 Pack. This is little revamp of the Piper Archer-III by Rien Cornelissen. Overall the gauges in VC now do have darker background or overall color as opposed to Rien's release. Many small changes and additions have been applied. For a full list see the file Piper Archer-III_mod.pdf in the 'Docs' folder of the aircraft. Some features to mention here are: - Newly created blue and green liveries. - Added new VC cameras. - Added documentation including Reference and Checks kneeboard files. - Added original POH for the Piper Archer III. - Small changes and additions in Light configuration. - Small additions to VC consist of: - CockpitSounds - Revised GNS 430 - Radio Stack - Annunciator panel is now more extended. - GPS-NAV switch in Auto Pilot, Heading value display and adjust values in Auto Pilot. - Some tooltips in overhead are added. - Recoloring of backgrounds of some gauges. - Made some gauges clickable to toggle them in expanded state. - Panel configurations for FSX included. - Install guide available in INSTALL.txt

These modifications are for and of the Piper PA-44 Seminole aircraft created by Rien Cornelissen. They consist of modified gauges, added Cockpit sounds, added VC cameras, added documentation and kneeboard files, slightly changed light configuration, enhanced Bendix King Auto Pilot, TCAS, GPWS, and some new and some revised gauges as well. A new sound set has been added because of issues with the original aliased sounds in P3Dv4. Finally one newly created livery has been added. Now this pack has 4 different liveries. All has been tested okay in Prepar3D v4+.and in FSX as well. Note that this is the complete aircraft. See for full information and credits file 'Piper Seminole RC mod.pdf' in the 'Docs' folder of the aircraft. Happy flights.

FSX/Steam/P3D3 Cessna 310Q Olympic Livery. This is a fictional livery of a Cessna 310 Q of Olympic Aviation. The reason for the livery is that I made a handcrafted 310 Q out of balsa wood & silkspan RC Model in 1977 that I still own in this same livery colors( I included photos of the RC Model in the package). You will need the original freeware Rob Richardson Cessna 310Q(Link Listed Bellow). Full VC and Continental T10 Sounds by Gary Jones. For the Microsoft Flight Simulator X SE. Happy Landings everyone. Repaint by Hellenic Aircraft/Yiannis Katehis Tsetsas 2023.

This is a fix for anyone that has issues with the DC-6 tanker pack's gauges not appearing. In some, not all installs for some reason, the gauges do not appear in the 2D or 3D panel. These two files should fix the missing gauges, as they were accidently omitted in the original release files. Simply drop the two files into your main P3D/gauges folder. Fix by Nicholas Mitchell.