185.01Mb (1491 downloads)
FSX/P3D Convair Model 7002 XF-92A by Milton Shupe, Rick Mackintosh, Brian Alexson, Scott Thomas, Hans-Joerg Naegele, Jan Rosenberg, Nigel Richards, Pilot Figure by Jan Visser, and Tire textures by Mike Kelly. The Convair model 7002 or (P-92), a delta winged turbojet airplane, better known as the XF-92A, was the first in a long line of American Delta Winged Aircraft. The XF-92A was a single seat, jet propelled research fighter-type land plane. Characterized by a 60º delta wing and a large vertical tail, the wing planform of the XF-92A was an equilateral triangle with a span of 31’4”. With no separate horizontal tail surfaces, the elevons (combined elevator/aileron) provided the pitch and roll control for the aircraft. The authors of this package honors that development and testing that propelled the advancement of the delta wing concepts and use. IMPORTANT NOTES: Your Sim's Realism settings must be set to at least Medium for this product to work. XML TOOLS must be installed to get full benefits of "G" and AoA effects. See the DOCS folder for simple installation based on your Sim.
Posted Jun 4, 2018 22:47 by Milton Shupe
14.81Mb (3027 downloads)
FSX B-2A Stealth Bomber. The B-2A Stealth Bomber is the most sophisticated aircraft on the planet. She is essentially a 'Flying Wing' platform with no V-Tail, and is controlled by pre-programed flight computers stationed in various positions within the crew cabin and wings. There is one main computer that controls the aircraft, with two redundant back-up computers assigned to it in case of failure. All additional computers are assigned to functions involving flight control, system monitoring, data communications, and radar. Engine and aerodynamic effects are controlled by these computers which serve several actuators and ailerons, including the spoilerons, which further compensate for the lack of a V-Tail. In theory, and because of these computers, the aircraft is “Stall-Proof”. The only way it can stall is if the computers fail. There is no way she can be flown without the computers active. The REAL aircraft does almost everything based on pre-programed data, other than taxi to the runway (although this is also possible to program). Before each flight, the Mission is designed and then assigned to the Mission Flight Box (Portable Computer) which is then carried by the Commander to the aircraft, and the data from the box is “transferred” to the main on-board computers. Because of this, the B-2 cannot be flown until the box is ready for the mission, and pilots cannot simply jump in and fly her, with the exception that the data is transferred via satellite. Original aircraft design by Alphasim; VC Adaptation, panels and gauges by Philippe Wallaert. Sound by Ruggero Osto. Real world engine/aerodynamics, data and effects by Douglas E. Trapp. Also compatible with P3D up to v3.* but NOT P3Dv4
Posted Jun 4, 2018 06:21 by uploader
80.41Mb (2300 downloads)
FSX/P3D>v4 Royal Canadian Air Force Lockheed CP-140 Aurora. The Lockheed CP-140 Aurora is a maritime patrol aircraft operated by the Royal Canadian Air Force. The aircraft is based on the Lockheed P-3 Orion, but uses the electronics of the Lockheed S-3 Viking. "Aurora" refers to the Roman goddess of dawn who flies across the sky each morning ahead of the sun and also refers to the Aurora Borealis, the "northern lights", that are prominent over northern Canada and the Arctic Ocean. The CP-140A Arcturus was a related variant used primarily for pilot training and coastal surface patrol missions. Comprehensive and detailed FSX native model by Team KBT. HD textures by Adrian Brausch. Fantastic model by Team KBT/Hiroaki Kubota. Assembled and tested in P3Dv4 by Chris Evans using available files. Should also be fine in FSX and earlier P3D versions. Zip preview for images
Posted May 18, 2018 07:42 by chris evans
59.48Mb (3064 downloads)
The MIG-29 Fulcrum is an air superiority fighter introduced in 1982 in the soviet air force. Original model by IRIS simulation. VC modifications, panels and gauges for wide and standard screen by Philippe Wallaert. See instructions in the readme.txt file. Works in FSX and P3D up to V3.* but not V4.
Posted May 6, 2018 02:37 by Philippe Wallaert
48.45Mb (5502 downloads)
The version 2.0 includes significant improvements for the VC and the external model in terms of display quality and animations. Pls read the release history documentation inside the zip file for more information. The aircraft has been developed for FSX Flight Simulator SP1 or SP2 under Windows 7. It has also been tested with Microsoft FSX Acceleration, and P3D simulator but full compatibility is not guaranteed by the author. This package includes the aircraft model (Single-Seater, Two-Seater), a virtual cockpit (VC) and a 2D panel. All three parts have been designed and developed according to a large number of technical documents, descriptions, and pictures from the Eurofighter. The 2D panel has been developed for wide screen monitors only. The design goal was to develop an aircraft model along with a VC and a 2D panel as close as possible to the original aircraft. It was, however, not possible to program all the functions and displays, because of the complexity of the real Eurofighter, due to limitations in FSX, and classified capabilities. Changes and additional functions have been made for simplification or gameplay reasons. The panel with the MFD displays, HUD, radar functionality, weapon simulation and indicators gives a good impression on how the real Eurofighter cockpit looks inside. A significant effort has been made to test, update and improve the flight dynamics of the model. The model includes and supports the following additional payloads : Three external tanks, 6 AMRAAM missiles (mid range Air to Air weapons), 2 IRIS missiles (short range Air to Air weapons), 4 PWIV laser bombs. External tanks and the weapons are configurable via a panel MFD screen. Paints are included for: GE, UK, Italy, Spain, Austria, SAAF, NATO, and just the base texture. This is not a load and fly package. Please take your time to read the included documentation carefully. Do not skip chapters because you may think, they are not important for you. For copyrights, credits, and installation instructions look at the PDF documentation inside the ZIP file. By Dietmar Loleit Installation In order to install this package some basic knowledge of handling files and folders in FSX/Windows, and on how to edit existing .cfg files with a text editor are required. The installation is described in detail in the pdf document inside the zip file. Please read it carefully !!! Works in FSX and all P3d versions up to v4
Posted May 5, 2018 08:28 by Dietmar Loleit
74.50Mb (2123 downloads)
P3D>v4 /FSX Bombardier NR-11a (E-11a) NASA Package. The Bombardier E-11a is a modified variant of the Bombardier Global Express. The BD-700 has carried the High-Altitude Lidar Operational Experiment (HALOE) in order to survey large areas rapidly. FSX Native model by Iris with added enhanced new upgraded VC by David Hoeffgen , includes built in FMC, working wipers and more (see VC docs in folder). Added the high quality textures by S Peterson. Includes Honeywell FMC (Find it in Instrument panel - Views) and revised MFD and custom sounds. High quality model with opening doors and stairs. Updates by Chris Evans.
Posted Apr 13, 2018 09:12 by chris evans
104.36Mb (6845 downloads)
The Alpha Simulation McDonnell Douglas F-4 Phantom II completely rebuilt for FSX and P3D up to v4. Items reworked for FSX/P3D: 1. True FSX Native modeling, converted to FSX using ARNO’s MDLX program. 2. All new paints. 3. Working Combat Radar. 4. All paints are in DDS format. 5. Multiple Liveries. 6. New air configuration file. 7. New HD VC textures. 8. FSX Air File installed. 9. Camera views added. 10. Default and custom GPS. 11. FSX coded gauges and sub panels A collaboration created by the following flight simulation artist Antonio Diaz, Cirrus N210MS, Tim Conrad and David Robles. Sounds tied to Dino Cattaneo's F14 Tomcat
Posted Apr 6, 2018 17:56 by David Robles
22.01Mb (873 downloads)
FSX/Acceleration/FS2004/P3d3.5 Chance Vought Cutlass F7-U. This was an USN carrier-based jet fighter and fighter-bomber of the early Cold War era with a highly unusual, semi-tailless design. That sophisticated design, based an German Arado concept aircraft caused numerous technical and handling problems with some dramatical accidents and the insufficient thrust and unreliable engines led to a short career. The original FS2004 model comes from RanchoJEN team/ J.E.Narcizo. Michael Pook's upgrade with static VC gave me the motivation to build a dynamic VC which is close to the real cockpit. He did also the panel configuration and the FDE tuning which gives that rare bird an excellent handling for carrier landings. Reconverted model with 2D panel and VC (Shift E 2 for missiles shots (VC only)) by Erwin Welker.
Posted Apr 6, 2018 02:55 by Erwin Welker
29.66Mb (1945 downloads)
FSX/P3D>v4 Boeing P-8 Poseidon RAAF Package. The Boeing P-8 Poseidon is derived from the Boeing 737-800ERX and is used in anti submarine ops, early warning self protection and anti surface warfare. The P8 is armed with customised weapons such as torpedos, anti ship, whatever may be required. The Australian RAAF took delivery of the 1st P8 in 2016. The high detail FSX Native Boeing P-8 Poseidon from TDS will be enjoyed by many more people who do not know how to install a VC into a FSX native model. The VC is the Alejandro Rojas Lucena/FSND fantastic Boeing 737-800 VC cockpit blended with Ken Wiggington's revisions for the default B737 VC to make it more resemble military ops aircraft. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. There are custom Boeing sounds included for that extra realism. I added the great textures by the S Peterson. See VC docs to get the best out of the VC and FMC. Prepared and assembled for P3D & FSX by Chris Evans.
Posted Apr 3, 2018 12:47 by chris evans
18.84Mb (916 downloads)
The Vought F7U Cutlass was a United States Navy carrier-based jet fighter and fighter-bomber of the early Cold War era. It was a highly unusual, semi-tailless design, allegedly based on aerodynamic data and plans captured from the German Arado company at the end of World War II. Regarded as a radical departure from traditional aircraft design, the Cutlass suffered from numerous technical and handling problems throughout its short service career. The type was responsible for the deaths of four test pilots and 21 other U.S. Navy pilots. This is an FSX update of the FS2002/2004 model deigned by RanchoJen models and features a modified 2D panel and a highly detailed static VC (non-functional gauges). Automatic smoke and afterburner effects added. Credits go to the designers mentioned above, whom I've tried to ask their permission for this update but their E-Mail as well as the link mentioned in their readme is invalid anymore. Modified 2D panel, new static VC as well as effect configuration by Michael Pook.
Posted Apr 1, 2018 08:32 by Michael Pook