149.58Mb (2908 downloads)
Mitsubishi F-2A/B for FSX and P3Dv4 The Mitsubishi F-2 is a multirole fighter derived from the General Dynamics F-16 Fighting Falcon. Thank you for downloading. About the model This model has been created to conform to FSX and P3Dv4. For P3D we have not tested with V1 V2 V3. As for P3D use, there are also sides that we have not yet managed to grasp P3D, Please note that it may not be the best model. Current VC is F-2A and F-2B are both single-seat VC. In short, F-2A's VC is used for F-2B. Also, we can not do engine start operation at VC. Please use Ctrl + E to start the engine. By Team KBT
Posted Mar 29, 2018 07:10 by uploader
149.06Mb (849 downloads)
Mitsubishi F-2A/B for FSX and P3Dv4 V1.2. The Mitsubishi F-2 is a multirole fighter derived from the General Dynamics F-16 Fighting Falcon. Thank you for downloading. About the model This model has been created to conform to FSX and P3Dv4. For P3D we have not tested with V1 V2 V3. As for P3D use, there are also sides that we have not yet managed to grasp P3D, Please note that it may not be the best model. Current VC is F-2A and F-2B are both single-seat VC. In short, F-2A's VC is used for F-2B. Also, we can not do engine start operation at VC. Please use Ctrl + E to start the engine. By Team KBT
Posted Mar 29, 2018 05:51 by uploader
33.37Mb (1303 downloads)
Royal Canadian Air Force Lockheed CP-140 Aurora for FSX and P3Dv4. Adrian Brausch precisely repainted CP-140 Aurora with high resolution, and Team FS KBT created a special model. This model of Block 1 specification created wingtip Radomes and antennas in detail. 5 types of painting including special painting can be enjoyed. Although models are included, many textures, gauges and sounds read the P-3C Orion FSX. Therefore, P-3C Orion FSX is required. ("P-3C ORION FSX" created by us can be displayed on P3Dv4.) Team FS KBT with Adrian Brausch
Required files:required file
Posted Mar 29, 2018 04:36 by uploader
13.51Mb (833 downloads)
FSX/P3D Gloster Meteor U Mk.16 The Gloster Meteor U Mk.16 was an unmanned target drone based on the F Mk.8. This was the second drone to be based on the Meteor, after the U Mk.15, which had been based on the F Mk.4. The first prototype U Mk.16 flew on 22 October 1956, the last U.16 conversion was made as late as 1972. This model represents Gloster Meteor U.16 WK800 ,belonging to the RAE at RAF Llanbedr. Native FSX/P3D (works in v4) model by A.F.Scrub
Posted Mar 16, 2018 05:33 by A.F.Scrub
62.55Mb (2168 downloads)
FSX/P3D 3 & 4 Boeing 787-8 Air Force One package with new enhanced VC. As far as I know the 787-8 is not yet painted in this livery but could be in future . Fantastic model by TDS/ Tenkuu Developers Studio with advanced 737-800 VC added. The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model blended with Ken Wiggington's work on the default 737 VC to make it more resemble a 787. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. There are custom Boeing sounds included for that extra realism. I added the high quality textures by JA Lopez . Aircraft.cfg edited to allow correct VC views and jetways. TDS wonderful native FSX Boeing 787-8 model. See VC docs to get the best out of the VC and FMC. Assembled and prepared for P3D 3/4 & FSX by Chris Evans.
Posted Mar 4, 2018 10:44 by chris evans
21.84Mb (1386 downloads)
The Douglas X-3 Stiletto was a 1950s United States experimental jet aircraft with a slender fuselage and a long tapered nose, manufactured by the Douglas Aircraft Company. Its primary mission was to investigate the design features of an aircraft suitable for sustained supersonic speeds, which included the first use of titanium in major airframe components. This is a new enhanced FSX update of the X3, previously updated by uploader. Textures and panels have been entirely reworked to make them look crisp and fresh and the panels have been equipped with new more realisic gauges. Automatic smoke and burner effects added. All in all, for those who love this awesome aircraft, this is a must-have. Thanks to Kazunori Ito for the original model, to E.J. Wells for his texture enhancements, to Erwin Welker for the 2D panel yoke and to Philippe Wallaert for many of the gauges. New panel configuration, vc light and smoke and burner configuration by Michael Pook.
Posted Mar 4, 2018 01:35 by Michael Pook
22.61Mb (2441 downloads)
P3D V3 & 4 / FSX North American OV-10A USMC twin package. these 2 represent VMO1 with green camoflouged paint that the OV-10's wore in the mid eighties up until Desert Storm and VMO-1, MCAS New River N.C. Tim Conrad original OV10D converted to FSX native format by LLS and OV-10A texture conversion by Chris Evans. Textures by John Detrick. Uses VC/panel conversion by Danny Garnier. North American Rockwell OV-10 Bronco is a twin-turboprop light attack and observation aircraft made in the US between 1965 and 1986. The OV10 Bronco is still in use today. Included engine sounds. Adjusted wheel levels and eyepoint. Assembled and edited by Chris Evans. Tested only in P3Dv4 but should be ok in FSX and earlier P3D versions.
Posted Mar 1, 2018 10:08 by chris evans
22.92Mb (1617 downloads)
P3D >V4/FSX North American OV-10A 20th TASS, Danang, South Viet Nam 1969 package. Tim Conrad original OV10D converted to FSX native format by LLS and OV-10A texture conversion by Chris Evans. Uses VC/panel conversion by Danny Garnier. North American Rockwell OV-10 Bronco is a twin-turboprop light attack and observation aircraft made in the US between 1965 and 1986. The aircraft is still in use today. Included engine sounds. Adjusted wheel levels and eyepoint. Assembled and edited by Chris Evans. Tested only in P3Dv4 but should be ok in FSX and earlier P3D versions.
Posted Feb 24, 2018 08:50 by chris evans
82.42Mb (2319 downloads)
P3D 3/4 /FSX Bombardier E-11a Sentinel R1 and Global Express Military Pack (revised). USAF E-11A serials 11-9001 (R1), 11-9355 (GLEX), 11-9358 (GLEX) and 12-9506 (GLEX) Package. The BD-700 has carried the High-Altitude Lidar Operational Experiment (HALOE) in order to survey large areas rapidly. FSX Native model by Iris with added enhanced new upgraded VC by David Hoeffgen , includes built in FMC, working wipers and more (see VC docs in folder). Added the high quality textures by S Peterson. Includes custom sounds. Refined flight dynamics for a super smooth flight. High quality model with opening doors and stairs. Updates by Chris Evans.
Posted Feb 20, 2018 12:24 by chris evans
32.93Mb (3956 downloads)
FSX/P3D Eurofighter Typhoon V1.0 The aircraft has been developed for FSX Flight Simulator SP1 or SP2. It has also been tested with Microsoft Acceleration, but compatibility is not guaranteed by the author. This package includes the aircraft model (Single-Seater, Two-Seater), a virtual cockpit (VC) and a 2D panel. All three parts have been designed and developed according to a large number of technical documents, descriptions, and pictures. The 2D panel has been developed for wide screen monitors only. The design goal was to develop an aircraft model along with a VC and a 2D panel as close as possible to the original aircraft. It was, however, not possible to program all the functions and displays, because of the complexity of the real Eurofighter, due to limitations in FSX, and classified capabilities. THIS IS NOT A LOAD AND FLY PACKAGE. PLEASE TAKE YOUR TIME TO READ THE INCLUDED DOCUMENTATION CAREFULLY. Do not skip chapters because you may think, they are not important for you. FSX native model. Will work in P3D (all versions) also. Created by: Dietmar Loleit
Posted Feb 17, 2018 02:06 by admin