Built by the Canadian Car Foundry as CCF4-361, this aircraft went to the Aeronautica Militare Italiana as a Harvard 4M, with the serial MM53816. Sold on in 1981, it became N1363W, and flew in this US Navy colour scheme as SNJ-6K NAVY 28. Re-registered N36FC in July 1995, it continued to fly in this colour scheme until it was sold in August 2012, and resprayed in a standard US Navy blue colour scheme. N36FC continues to fly based in Czechia. Painted on to J.E. Narzico’s T-6 model, complete with Daniel Nole’s T-6 panel, this repaint shows N36FC as a US Navy target drone.

The Ilyushin Il-2 known as"Flying Tank" or "Shturmovik",most produced military aircraft in aviation history,was a armored ground-attack plane,with a crew of two or one in early versions,that was produced by the Soviet Union during the Second World War. Ilyushin Il-2 1-seater (5 textures sets)-the first aircraft series 1941-42 Ilyushin Il-2 2-seater (7 textures sets)-the last aircraft series 1942-45 Fully animated VC (no 2D cockpit),the add-on is compatible with FSX Acc and P3D. By Rob Koval.

The Bell P-59 Airacomet is a single-seat,twin-engine jet fighter that was designed and built by Bell Aircraft during World War II.It was the first jet produced in the United States. Because the plane was underpowered US Air Forces canceled half of the original order for 100 fighters,using the 50 completed production aircraft as trainers. Bell P-59A Airacomet (1 texture set)-prototype of Aircomet without weapon. Bell P-59B Airacomet (3 textures sets)-production model of Aircomet with weapon. Fully animated VC (no 2D cockpit),the add-on is compatible with FSX Acc and P3D. By Rob Koval.

The Yakovlev Yak-1,3,7 and 9 it is a series of Soviet single-seat,single-engine fighter aircraft of World War II These planes are considered some of the best fighter planes of World War II. Yak-9 (3 textures sets): The last in the series.The heaviest,fastest and with the most powerful engine,but the least agile. Fully animated VC (no 2D cockpit),the add-on is compatible with FSX Acc and P3D. By Rob Koval.

The Yakovlev Yak-1,3,7 and 9 it is a series of Soviet single-seat,single-engine fighter aircraft of World War II These planes are considered some of the best fighter planes of World War II. Yak-7 (3 textures sets): Developed from the earlier Yak-1 fighter,initially as a trainer but converted into a fighter. Fully animated VC (no 2D cockpit),the add-on is compatible with FSX Acc and P3D. By Rob Koval.

The Yakovlev Yak-1,3,7 and 9 it is a series of Soviet single-seat,single-engine fighter aircraft of World War II These planes are considered some of the best fighter planes of World War II. Yak-3 (4 textures sets): The lightest and most agile aircraft in this series,and the most popular among pilots. Fully animated VC (no 2D cockpit),the add-on is compatible with FSX Acc and P3D. By Rob Koval.

The Yakovlev Yak-1,3,7 and 9 it is a series of Soviet single-seat,single-engine fighter aircraft of World War II These planes are considered some of the best fighter planes of World War II. Yak-1 (3 textures sets): The first aircraft in the series,constantly improved during production. Yak-1b (3 textures sets): The Yak-1b has the same performance and parameters as the Yak-1,but has new bubble canopy with lowered rear fuselage. Fully animated VC (no 2D cockpit),the add-on is compatible with FSX Acc and P3D. By Rob Koval.

Built in 1939, MSN 94067 was initially registered as G-AFNN for Hull Aero Club. Exported to Australia for use by the Royal Australian Air Force, it became VH-ACR in 1940. The RAAF took the aircraft on charge in November 1941 and it became A21-42. Civilianized in 1945, it reverted to being VH-ACR, but after the Certificate of Airworthiness ran out in 1947, it became a museum exhibit. Purchased as a restoration project in June 2003, it became VH-CZB, and had its first post restoration flight on 28th August 2008. It remains an amazing piece of restoration work and a credit to its owners in Euroa, Victoria. Painted onto Frank Elton’s DH.94 Moth Minor model, I have shown VH-CZB in its post restoration colours as A21-42. Enjoy.

This update to the A. F. Scrub (Scrubby) RAF PRXI aircraft is intended, with approval, to make the 2D and VC panels appear more in accordance with the World War II PILOT’S NOTES PN 1565 for SPITFIRE IX, XI & XVI and indeed, to instruct on how to operate within the intent of those Notes. THIS UPDATE, AS PER THE ORIGINAL, IS NOT SUITABLE FOR P3D BEYOND V3 The update includes the 2 x 66 IPG wing tanks that were not included in the original upload. No provision is made for adding blister or drop tanks to further increase range. The Recon flight to the Ruhr Dams in 1943 is almost the limit without additional tanks being added. The project involved substitution of gauges, writing xml files to update gauges that did not function. Adding existing Lancaster gauges by Plane Design (previous approval over 13 years ago), xml help from Jeff Lind in Sydney to achieve the intent and gauges by Rob Barendregt for taxi and braking, RMcL and Jeff Lind for AWPT/Fuel, Wolfgang Piper for the analogue wind gauge plus Flight Time by P Wallaert. The original bmp for the 2D panel is worked over to remove the gun sight. For scenery viewing enthusiasts there is no better way to view your scenery as it passes under this aircraft at 30000ft. This will certainly be a new experience for all would be pilots. Refer to Page 8 of the pdf for installation details.

Some updates for Jens B. Kristensen's AW Ensign. You'll need to download and install his original package first. I've given it a new, re-textured cockpit and passenger cabin. Along with new gauges for an enhanced appearance. Details can be found in the supplied readme file. Enjoy! -Bob