LIRF - Fiumicino Intl Airport, Rome, Italy. This is Ray Smith's FSX file. Ray has given me permission to modify his file for P3Dv4. This is a very accurate version of Fiumicino International Airport with two optional files, one file with the Crosswind runway activated and in full operation, where all 3 runways will be used for takeoff/landing and one file as the default airport runway operation. Runway 16C/34C is closed and now taxiway "D". Although 16C/34C is still used under certain visibility conditions P3Dv4 will only allow one or the other. Assigned parking as per their website with extra parking including gates for the A380. The new Terminal 3 expansion added. Gates/parking now numbered in the correct order. All ILS approaches, taxiways and taxi signs updated and corrected to the latest charts. Extra fuel trucks, support vehicle roads rebuilt and many other scenery improvements and objects added. by Robert Catherall

FS2004/FSX Seafire MkIIIb The Royal Navy’s Fleet Air Arm entered World War 2 under-equipped with modern aircraft., so a logical move was an adaptation of the RAF’s legendary Spitfire. The first Seafires, designated Mk. 1B, were rebuilds of Spitfire Vb’s and entered service in early 1942. The Mk IIIs served in the front line until 1946 and were then rapidly superseded by Griffon engined Mks XV, XVII and 47s. France equipped some of its Aeronavale squadrons with ex-Royal Navy Seafire IIIs and these saw front line service in Viet Nam in 1946/47. A handful of de-navalised MK IIIs served with the Irish Air Corps until 1960 and were almost certainly the last Seafires in service anywhere. Some historians have derided the wartime Seafire as too fragile and too sensitive to be an effective naval fighter and there is no doubt that its deck landing history reflects many accidents. It is, however, acknowledged as one of the finest low level fighters afloat in 1945 and one of the few that could tackle a Japanese Zero on equal terms. GMAX source included. Model by A.F Scrub

FSX/P3D>v4 Airbus 380-800 Lufthansa 2018 livery package. This is the new 2018 Lufthansa paint on the A380. As of may 2018, Lufthansa operate 14 A380 on flights throughout the world . Added the better Thomas Ruth VC with updates by Chris Evans and Louis Quintero. Use FMC under Views/Instrument panel in FSX menu. (FSX : Go to Views -Instrument Panel. P3D: Go to Vehicle - Instrument panel) I included the photo-realistic textures by many. RR engine sounds. Added the great textures by Philip Hughes. Includes built in FMC by Garret Smith. Original model by Project Airbus/Thomas Ruth. Tested on P3Dv4 and should be fine in FSX and other P3D versions. Zip preview for images. Custom revised package by Chris Evans

FSX/P3D Boeing 747-400M KLM New Colors package with advanced VC (v2) As of May 2018 Dutch flag carrier operate 9 Boeing 747-400M on routes throughout the globe. These are due to be phased out by 2021. Assembled and edited for FSX with Enhanced VC from Alejandro Rojas Lucenda. Thank you to Skyspirit for their wonderful models. High quality KLM textures by Paul Craig. As of 2015 KLM operate a total of 17 Boeing 747-400M aircraft. Project Opensky Boeing 747-400 assembled and upgraded for FSX with the upgraded Boeing 747 internal cockpit (VC) from Alejandro Rojas Lucenda (Manual included). This is the Project Opensky FSX native Boeing 747-400F model, and includes ground cargo servicing, stairs (FSX - Go to Views - Instrument Panel -Posky Utility. P3D go to Vehicle - Instrument Panel -). Included CF engine sounds from BrandonG, with realistic jet whine to make your flight sound great. Thank you to Project Opensky for their contributions to the worldwide community of flight simulation. Also includes the Boeing 747 VC textures upgrade. This give a much clearer 747 interior virtual cockpit look. Zip preview for larger pictures. Added views, fixed other things. Zip preview for images. Previous version had 4654 d/ls. Assembled and edited for P3D 3 / 4 & FSX by Chris Evans.

FSX FMST-Toliary Airport Madagascar. Toliara Airport is an airport in Toliara, Atsimo-Andrefana Region, Madagascar. New setup of this small airport you might visit going around the world in 80 flights.

FSX/P3D Airbus A350-900XWB Hong Kong Airlines package. Hong Kong Airlines operates flights mainly in the far East but as far as Russia and the USA. As of May 2018, HKA operate 4 A350-900 with a further 17 on order. Added the better Thomas Ruth VC with updates by Chris Evans and Louis Quintero. Use FMC under Views/Instrument panel in FSX menu. (FSX : Go to Views -Instrument Panel. P3D: Go to Vehicle - Instrument panel). Added better views. The Airbus A350 XWB is a family of long-range, twin-engine wide-body jet airliners from the European aircraft maker Airbus. The A350 is the first Airbus aircraft with both fuselage and wings made mainly from carbon fibre structure. The A350 is intended to replace the A340 and compete with Boeing's 787 and 777. Added the textures by Hernan Anibarro. Previous version had 4640 d/ls. Tested on P3Dv4 and should be ok in FSX and earlier P3D versions by Chris Evans.

Cleveland Ohio Hopkins International Airport for P3D. Originally created for FSX, this airport has been converted to work in P3D. Several improvements have been made to the default airport. The default terminal buildings have been replaced with buildings created in FSDS; aircraft gates have been correctly coded using Airport Design Editor 1.76.6582; a new airport vehicle network has been built; extra fuel trucks have been added throughout the airport; the tower view has been changed to display from the roof of the control tower; all taxiway designators are correct and all taxiway signs are correctly placed and named; there is the option to open all runways to AI traffic; the FedEx and UPS cargo areas are modeled, as well as the Expressjet maintenance area; and Jim Dhaenen's excellent ramp lights are also included. Please refer to the README FIRST.txt file to insure proper installation of all files

FSX/P3D>v4 Airbus 320-200 Air Malta package. Air Malta is Malta's flag carrier airline flying to destinations throughout Europe, North Africa, the Middle East, Russia and eastern Europe. As of May 2018, Air Malta operate 8 A320-200. Model by Project Airbus. Added the better Thomas Ruth VC with updates by Chris Evans and Louis Quintero. Use FMC under Views/Instrument panel in FSX menu. (FSX : Go to Views -Instrument Panel. P3D: Go to Vehicle - Instrument panel) I included the photo-realistic textures by Mathieu Vos, the A320 checklist by Werner Schott. A320 sounds by Abid Mounir. Added wing views. Includes FMC by Garret Smith. A320 sounds and manual included. Custom revised package by Chris Evans

Airbus A320-214 CFM Air Malta 2018 livery. Model by Project Airbus. Textures by Mathieu Vos.

FSX, Flypad Gauge Version 2.0 This gauge has been developed on Win7 for FSX Flight Simulator SP2 or SP1.It should also work with Acceleration, but this is not guaranteed by the author. The gauge is a little extra addon based on the design of a smart phone and provides 9 different displays which are different from all of the standard gauge displays on a regular aircraft panel. It is mainly helpful for the user flying small propeller aircraft, and old timer aircraft. However, the displays are as well attractive for sim pilots flying modern jet aircraft. Use it as if you just grabbed to your smart phone during a flight and check on the status of your aircraft, or how the terrain awareness situation looks like, how the AI traffic on the radar is, while you proceed with your flight plan. Enjoy the new design of a simple aircraft attitude display during an ILS approach. A new screen for LAT/LON coordination control and distance/bearing calculation has been added to this version in addition with a number of improvements. For credits look at the pdf documentation inside the zip file. By Dietmar Loleit