FS2004 Latecoere 28.0 936 White. Single-engine transport plane. 16 examples built for Aeropostale which used them on the Toulouse-Casablanca route. High wing monoplane. Wooden and metal wing, metal fuselage, canvas on the back. The Latecoere 28 was a successful French long-haul mail plane and passenger airliner of the 1930s. It was the main-stay of Air France's predecessor, Aeropostale in its efforts to establish intercontinental air mail services and support French colonialism and French cultural influence between the wars. By Denis Fouchard.

Denmark's Flight Services has an early morning commuter flight that will be making 2 stops and dropping off passengers at each airport, and then returning to Aalborg, hopefully this should be a routine flight ?

Flight Analyzer Utility FsQC v7.28 Flight Data Recorder - with Logbook. FOR: MSFS P3D, FSX(Steam) and FS2004 Now with improvements and more features Very easy to use, just make a flight plan in the simulator or in this utility. (But please read the readme.txt file) What this program does: quickly change the settings of MSFS2020/P3D/FSX/FS2004, such as time, date, fuel, weight, traffic etc. Start a failure sytem, such as gear, flaps, engine, etc. runway detecting system to see wich runways are in use. Quickly look at Airport Info for all possible info such as: ILS, Radio, RW length, Elevation, etc, etc. This is all fully freeware. Full manual at: www.fsqc.eu Only Limited demo for: The flight analyzing/data recording, Logbook and the PDF Flightreport. Flight analysis start recording at the moment when you begin taxiing. It gives you huge information such as: - takeoff- and landing-weight. - takeoff- and landing-roll in m. and ft. - separate fuel consumption in taxi, climb, cruise and descent. - maximum banking in flight. - which speed you using the flaps and gear. - when autopilot on or off. - vertical speed on touchdown. - reverser set after landing. - wich speed you cancel reverser. - bouncing at landing. - graphical landingchart with Touch&Go and Missed Approach. - graphical Climb-, Descent- and Full- flightchart. - and lots of more. You can better look the example of the pdf document. Requirements: Computer with Windows7 or higher and internet access.(XP also supported look in the help/manual) Flightsimulator MSFS2020, P3D, FSX(Steam), or FS2004 and FSUIPC installed. Note: requires paid activation for full use of the Flight Analyzer and Logbook. Register and you have 1 month free. Program fully works without registration at airport Athens and Iraklion (Greece). By Evander Tholen

This package contains the SkySpirit2010 Boeing 767-200 models (v5), both cargo and passenger (2 models), equipped with the enhanced Microsoft FSX 737-800 VC model by Alrot (FSND). It has 22 liveries and 3 dedicated sound sets for PW and GE engines. It incorporates appropriate .air files for the different models. The aircarft.cfg has been very slightly adapted in comparison with the aircarft.cfg as provided by the SkySpirit Team. Many extra gauges has been added like TCAS, GPWS, GroundHandling, AntiSkid, and Cockpit Sounds. I also added some extra sound for various knobs in the VC. The VC textures comes in 2 colors: standard Ms FSX and brown tinted by Chris Evans. You can swap these colors easily, see the INSTALL.txt. See for credits concerning this package the file CREDITS.txt See for a full list of my adaptations the file 'Flanker256_log.txt' in the 'Docs' folder of the aircraft. Full documentation for the aircraft has been added as well as Reference and Check Lists. Night lighting for all liveries has been checked extensively in Prepar3D v4.5. Liveries: ABX Cargo, Air Canada, AmeriJet, ANA, Ansett, ATI Cargo (2x), CargoJet, Delta Airlines (3x),EL-AL, FAB, Jupiter (Bolivian AF), Kam Air, Pacific Western, Philipine Air, Star Air, Tampa Cargo, TransAero, United Air (2x). Happy flights and stay safe.

FSX/P3D Airbus A350-941 Delta Airlines package. The world's 2nd largest airline is based at Atlanta Hartsfield - Jackson Airport and currently have 14 Airbus A350-941. FSX native AI model by FS Painter. 2020 updated interior model (VC) by Speedbird77. Textures, assembled and tested in P3D v5 and should be ok in FSX and earlier P3D versions. By Chris Evans.

FSX/P3D Finnair McDonnell Douglas DC-9-10 package ------- Finnair 70s-80s livery included in this package, registration OH-LYI. Model by Eric Cantu/SGA, converted by Eagle Rotor craft Simulations. VC Model by FSND. Panels: Original FSND edited by speedbird77. DC-9 guages: by Philippe Wallaert. Sounds: Adam Murphy. --- My Facebook page: https://www.facebook.com/AzureFire-107137807723412 ----- I will post videos about my repaints at my YouTube channel: https://www.youtube.com/channel/UC0Gidgoo7rWZlStYyTroMqw

FSX/P3D Tunisair Express/Libyan Airlines Bombardier CRJ-900 package ----- Featuring 2 liveries (Tunisair Express and Libyan Airlines, registrations TS-ISA and 5A-LAM) Project Opensky CRJ-900 2020 FSX native model and VC conversion made by Speedbird77. Repaints made by NEANT Robin and Nael --- My Facebook page: https://www.facebook.com/AzureFire-107137807723412 ----- I will post videos about my repaints at my YouTube channel: https://www.youtube.com/channel/UC0Gidgoo7rWZlStYyTroMqw

FSX/P3D Nordica and Estonian Bombardier CRJ-900 package -------------- Featuring 2 liveries (Estonian and Nordica) for the aircraft registered ES-ACB. Nordica is the successor of the Estonian national airline Estonian Air. Project Opensky CRJ-900 2020 FSX native model and VC conversion made by Speedbird77. Nordica textures by Chris Evans. --- My Facebook page: https://www.facebook.com/AzureFire-107137807723412 ----- I will post videos about my repaints at my YouTube channel: https://www.youtube.com/channel/UC0Gidgoo7rWZlStYyTroMqw

FSX Native MiG-29K 'Sea Fulcrum', model by IRIS simulations. Assignments unchanged from FS9, otherwise, FSX native materials and whatnot. Only did the single 'clean' model - the stores did not look so good. Hey, the price is right, looks great, super FPS, loads of fun.

FSX Native McD F-15C/D Eagle, model by IRIS Simulations. Hopefully, as this is unsupported freeware, and I've failed dismally at finding a contact, a native update won't cause distress. FSX standard materials, animations and tags, it's all working except for the inlet schedule, which I had to bodge a bit-see read me for details Clean 'C' and 'D', a Counter-air(2 tanks/6 'raams/2 -9L's/ALQ-184) C, a Combat trainer 'D' (2 tanks/-9/-120 acquisition rounds) I did a bit of a rebuild on the combat 'C', it was missing it's fuselage corner stores racks. Those are in place now.