This is a repaint of the 757-28A in Guyana Airways colors. The freeware 757-200 by Tenkuu Developers Studio (TDS) is needed for this repaint. The model needed is : "B757-200-RB211-535E4". Textures are 32bit dds & DXT5 dds. This repaint was tested on FSX-SE. It should work on FSX & P3D v1-4.

This is a repaint of the 737-2L9 Adv in Guyana Airways colors. The freeware 737-200 Tinmouse is needed for this repaint. This Boeing 737-2L9 was leased by Guyana Airways from Maersk Air, A.S. in 1980. It was with Guyana for just one year before being returned to Maersk Air in June 1981. Textures are 32bit dds. This repaint was tested on FSX-SE. It should also work on FSX & P3D v1-3.

This is a repaint of the 707-323 in Guyana Airways colors. The payware 707-300 by Captain Sim is needed for this repaint. Guyana Airways was formed in 1963 in Georgetown Guyana, and a network of scheduled services was developed through the 1960s and 1970s linking Georgetown with 24 domestic destinations, as well as Miami, Boa Vista (Brazil), and such Caribbean spots as Barbados and Port of Spain. Guyana Airways virtually leased all its aircraft, which is why many different aircraft types were used during the airline's operations. In 1978 its fleet consisted of a DC-6A, 2 Hawker Siddeley HS 748s, 2 DHC-4A Caribou, 2 DHC-6 Twin Otters, and 1 Cessna 310. Later on Tu-154s, L-188 Freighters, 2 707-300s, a 737-200, and a 757-200 were added to the fleet. The 707s were used for the direct service between Paramaribo and New York. In 1999 the airline ceased operations due to financial problems. Textures are HiDef 32bit dds. DXT5 dds textures are also included as well. This repaint was tested FSX-SE. It should work on FSX & P3D v1-3.

FSX/P3D Derby Airways DC-3 textures for Manfred Jahn and team C-47 v3.12. Derby Airways textures by Gary Harper.

KTEX Telluride Regional Airport, Colorado. Telluride Regional is the highest commercial airport in America at 9078 feet msl. You get photoreal with seasons,custom ground poly rumways,custom buildings and effects. FSX Acceleration will give the best results.(Also SP2 compatable). Acceleration users will have more eye candy !

This is an update for FSX of the F-86H Sabre by A.F.Scrub. I added a hud and a nav/GPS switch to the 2D panel and resized the GPS. The hud could not be placed correct on the VC. I updated the flight dynamics and added a centre tank to the aircraft.cfg file. This is the whole aircraft.

This is a simple add on to any paint kit to make your paint from that new pristine look to an aircraft that has not been clean, washed, and beaten by the elements in a war time footing. It also applies to civilian aircraft such as Jet Liners and commuter aircraft, these usually do not get washed until there hourly schedule checkups. In this paint kit you will find the following items, the main “Weathering Kit” Photoshop file with all that you would need to take the BMP of the aircraft you are working on and add ageing or graphics to. Even aircraft that do not come with a paint kit can be modified since the layers are sizeable and erasable to the degree or size you need to make it fit the project you are working on. What is included in this kit. You have the following layers. 1. Palette Guide sized 4096 x 4096 to sample each layer before applying to your aircraft BMP 2. Eraser able weathering layer 4096 x 4096 once sized to your BMP size (EX: 2048 X 2048) paste over the BMP then set your eraser to about 25% add start erasing to the degree that you want to show on weathering. 3. Assorted Rivets layer 4096 x 4096 use these to replace any rivets that may have been damaged or destroyed in creating your paint these are cut able and paste able to your BMP. 4. Horizontal double Rivets layer 4096 x 4096 a line of rivets double stacked running horizontal on the BMP. 5. Horizontal dirt layer 4096 x 4096 Dirt in Horizontal position. 6. Dirt for aircraft body layer 4096 x 4096 assorted dirt that can be cut and pasted then erased down to proper level for the aircraft fuselage. 7. Exhaust smoke layer 4096 x 4096 smoke for marking the body wear hot exhaust gasses would show on aircraft that have extensive use. 8. Rivets 2 layer 4096 x 4096 a second layer of smaller rivets in physical size to help you realign those missing ones when painting. 9. Panel lines layer 4096 x 4096 replacement lines to use when adding graphics to you paint. 10. Fuel Spillage layer 4096 x 4096 sizeable, eraser able, fuel track from leaky reloading. 11. Tire Dirt 1 layer 4096 x 4096 a small tire dirtying layer. 12. Tire Dirt 2 layer 4096 x 4096 a larger tire dirtying layer. 13. Oil and grime layer 4096 x 4096 oil and hydraulics fluids leaking along service doors and control surfaces areas. 14. Vertical grime layer 4096 x 4096 Grime running in the Vertical direction. 15. Fuselage Grime layer 4096 x 4096 general dirt and grime to add to areas of your aircraft. 16. Dark shading layer 4096 x 4096 shading to add under wings or ailerons of aircraft. 17. Oil spots layer 4096 x 4096 leaking oil spots. 18. Paint chips 1 layer 4096 x 4096 assorted chips and dings on aircraft paints. 19. Paint chips 2 layer 4096 x 4096 a larger set of paint chips. 20. Large dirt layer 4096 x 4096 surface dirt on a larger scale Flags and Emblems: In this folder you will find many graphics and emblems used by the military and general aviation companies. Including USAF, USMC, NASA, EMS, USFS, EXXON, RNZAF, RAAF, RAF, RCAF, BORDER PATROL, USGS, and many other countries and agencies that you may want to paint. Aviation Placards: In this folder you find placards that are located throughout military and civilian aircraft. Pin-Ups: Just what the title states; a folder of small very attractive art work of the female form.NASA MARKINGS 1 and 2: All of the markings from NASA including their famous worm font.

FSX/P3D Airbus A350-900XWB Yemenia package. Based at Sana'a International Airport, Yemen's flag carrier airline flies to destinations around North Africa, the Middle East and India. As of August 2019, Yemenia have 10 A350-900 on order. Added Garmin G1000 MFD and PFD popups and added FSX Garmin G1000 user maual. Added the better Thomas Ruth VC with updates by Louis Quintero and Chris Evans. Use FMC under Views/Instrument panel in FSX menu. (FSX : Go to Views -Instrument Panel. P3D: Go to Vehicle - Instrument panel). Added better views. Textures by Adam Hamada. The Airbus A350 XWB is a family of long-range, twin-engine wide-body jet airliners from the European aircraft maker Airbus. The A350 is the first Airbus aircraft with both fuselage and wings made mainly from carbon fibre structure. The A350 is intended to replace the A340 and compete with Boeing's 787 and 777. Textured, assembled and tested in P3Dv4.3 and should be ok in FSX and earlier P3D versions by Chris Evans.

Catania LICC area (V1.2), Sicily. This scenery covers the area around Catania Fontanarossa Airport for FSX Default and for compatible paywere LICC_FSX airport by www.ivanomarongiu.it

X-Plane 11 Focke-Wulf FW 44C Stieglitz 1.0. The Focke-Wulf Fw 44 is a 1930s German two-seat biplane known as the Stieglitz ("Goldfinch"). It was produced by the Focke-Wulf company as a pilot training and sport flying aircraft. It was also eventually built under license in several other countries. The Fw 44C was the main production version with minor equipment changes, and was powered by a seven-cylinder Siemens-Halske Sh 14a radial piston engine. Credit goes to Beber for the use of his pilot. By Philippe Gastebois.