FSX/P3D Project Airbus A321 FD-FMC version 1.55 To install aircraft, launch Setup program and follow instruction. In case of Setup program crash, you can install manually aircraft. Read Install Manual for DLL declarations This aircraft is based on Project Airbus A318 with following improvement: - New AIR file with new engines setting, flight dynamics - updated VC by Bjoern Kesten (fix Navigation display position) with rain effect - New VC textures, High definition, by CokiBH (2 set for night) - FD-FMC version 1.55 with 300 airports procedures, with SID, STAR, Approaches, holding pattern, DME-ARC management, preditive gradient during approach, full N1 management, real vertical navigation. Francois Dore

Middle East Carrier Operations Scenery (MECOPS) This scenery has been developed for FSX Flight Simulator SP1 or SP2. It has also been tested with Microsoft Acceleration , but compatibility is not guaranteed by the author. The scenery includes: Two carrier groups CVN68 and CVN69, ( carrier models from Javier Fernandez ), two AI KC-135 tanker aircraft, AI F-18A aircraft approaching the carrier, Navy destroyer and a Navy Cruiser as escort ships for the carrier, a number of oil platforms and the ARS4 radar gauge which displays air targets and boat targets. The ARS4 radar gauge provides also a auto landing function for the carrier and a auto tracking function for aircraft in order to support a A2A re-fueling. The scenery package includes as well the program Arrcab, developed by Richard Hogan, and the RCBCO gauge developed by Rob Barendregt. Arrcab or RCBCO are required to support a catapult start from a carrier and the cable arrestor function for a carrier landing. This is not a load and fly package. Please take your time to read the included documentation for the ARS4 gauge and the MECOPS scenery carefully. Do not skip chapters because you may think, they are not important for you. Do not start the installation of the scenery before you have finished the reading of the documents. For copyrights and credits please look at the documentation for this scenery. By Dietmar Loleit

That is a wings texture to improve any Cantu/Kittyhawk-type Boeing 737-200/Adv with the figure of vortex generators (VGs) on the wings. In terms of airliners, VGs are one or more sets of aerodynamic devices improving the air flow unto those. Comes with a French readme too. Freeware

The Fw 58 was a low-wing monoplane with two piston engines mounted in nacelles on the wing leading edges. The crew sat under an enclosed canopy. Aft of the flight deck, the fuselage was open to form a moveable machine gun station. The tailwheel undercarriage was retractable. The Fw 58 was widely used for training Luftwaffe personnel. It was also used as a VIP transport, ambulance, feeder airliner, photo reconnaissance, and weather research aircraft. It was built under license in Bulgaria, Hungary and Brazil. It was also operated by several countries such as the Netherlands, Romania, Croatia and Turkey. This is an FSX panel update for the Focke Wulf FW 58, previously designed for FSX by A.F. Scrub. The package includes a wheeled and a float version of the aircraft. Both the new entirely remodeled and enhanced VC and the 2D panel are now equipped with all authentic German gauges. smoke and VC light added. The wheeled variant's engines are now automatically fired off on the runway. All credits go to A.F.Scrub for the original model, new VC, gauge configuration as well as smoke and vc light by Michael Pook. This is the whole aircraft.

FSX/P3D>v4 Boeing 767-200/SF ABX Air Package. ABX is a cargo airline based in Wilmington, Ohio. Founded in 1980, ABX currently (April 2018) has a fleet of 37 Boeing 767-200 of which 21 are 'SF' versions. ABX main customer is DHL and many of it's aircraft are painted in DHL livery. Boeing 777-200SF with virtual cockpit and working Honeywell FMC for FSX. Includes revised VC and Honeywell FMC (via Views-Instrument panel). Project Opensky model features opening doors & cargo doors, detailed textures, accurate paint, dynamic shine & effects, dynamic flexing wings that respond to turbulence, fully independent suspension, trim animation, gear steering, accurate flight dynamics, spoiler animation, reflective cockpit windows, crash effects, animated tilting bogies, full night lighting, stairs, ground service vehicles when cargo doors open, (FSX find it under - Views/P3D Vehicle - Instrument panel - - Posky Utility), detailed virtual cockpit and more. Added custom B777 sounds. To use FMC - Go to Views - Intrument panel - FMC. See FMC docs. Fantastic native FSX model by Skyspirit/Project Opensky. Jetway exits. I have included the great textures by Paul Craig. Zip preview for images. Prepared, tested and assembled for P3Dv4 by Chris Evans. Should also work in FSX and earlier P3D versions.

Project Airbus A320 FD-FMC version 1.55 CFM & IAE engines. To install aircraft, launch Setup program and follow instruction. In case of Setup program crash, you can install manually aircraft. Read Install Manual for DLL declarations This aircraft is based on Project Airbus A320 with following improvement: - New AIR file with new engines setting, flight dynamics - updated VC by Bjoern Kesten (fix Navigation display position) with rain effect - New VC textures, High definition, by CokiBH (2 set for night) - FD-FMC version 1.55 with 300 airports procedures, with SID, STAR, Approaches, holding pattern, DME-ARC management, preditive gradient during approach, full N1 management, real vertical navigation. Francois Dore

P3D V4 Flugplatz Reutte-Hofen-LOIR, Germany. Reutte-Hofen Airport (German: Flugplatz Reutte-Hofen, ICAO: LOIR) is a private use airport located near Reutte, Tyrol, Austria. beautiful and challenging VFR flying area. This Airport is not included in P3Dv4, 2 small GA parking spots, 1 fuel parking spot and 1 helipad. This airport uses stoke library objects. No night operation. Charts and airport plan included. By Mak

KCID, Eastern Iowa Airport, USA, for FSX. New setup of another airport I came across in one of my virtual flights. It is located 06 miles SW of Cedar Rapids, Iowa. Tim van Ringen

In my recent upload for 'KSFO - San Francisco Intl Airport' (KSFO_P3Dv4_RWC.zip) I neglected to include a texture file to display textures for the added ramp and terminal light poles. Please install the included 'light1.dds' file in your 'Addon Scenery\texture' folder. Robert Catherall

Project Airbus A318 FD-FMC Revision Package 1.55. This aircraft is based on Project Airbus A318 with following improvement: - New AIR file with new engines setting, flight dynamics - updated VC by Bjoern Kesten (fix Navigation display position) with rain effect - New VC textures, High definition, by CokiBH (2 set for night) - FD-FMC version 1.55 with 300 airports procedures, with SID, STAR, Approaches, holding pattern, DME-ARC management, preditive gradient during approach, full N1 management, real vertical navigation. Francois Dore