The archive contains three textures for the IL-18: LOT of the 70s and 80s, and RA-75478, belonging to 223 LO. I know that there is a similar plane on the simrussia website, but for some reason I can't download it... The plane has a couple of complaints: it can only be flown during the day, because night textures are opaque and there is a typo on the LOT texture of the 70s (well, this was already a mistake of the author of the textures). I would be grateful if you tell me the solution to problems with installation and night textures. Thank you for understanding. Peace for everyone! Model Edgar Guinart, textures Stephen Browning. Works in FS2004, FSX and should work in P3D v3 (not 4+)

FSX/P3D Boeing 737-800F Air Incheon package. Air Incheon is a South Korean cargo airline based at Seoul Incheon International Airport. Currently Incheon have 4 Boeing 737-800F flying to destination around Asia and Russia. The high quality Boeing 737-800 model and paintkit from TDS. Package includes advanced 737-800 VC added. Including utility for ground services, Passenger bus, cargo, stairs, refuelling truck etc (find it under - Views - Instrument panel - Util) The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. Custom Boeing sounds included for that extra realism. VC added and aircraft.cfg edited to allow correct VC views, jetways, wheel levels and wing views. I added PDF B737 checklist, additional G1000 MFD and PFD screens and HGS (HUD). Textured and assembled for P3D4.5 by Chris Evans. Should also work in earlier P3D versions as well as FSX.

FSX/P3D De Havilland Dash 8 Q300 Air New Zealand. ANZ currently operate 23 Dehavilland Dash8 Q300. External model by Dreamwings converted to FSX native by Eagle Rotorcraft Simulations. Added the internal Dash 7 model (VC) by Milton Shupe and team. Internal model includes [passenger area. Textured and tested in P3D v5.3 by Chris Evans. Should also work in FSX and other P3D versions.

FSX/P3D Airbus A330-200 MRTT Canadia Royal Air Force Package v2. Revised as I rushed the 1st one out and made a few ommissions and errors. RCAF are expected to replace their CC-150 with 6 Airbus A330 MRTT. Fictional livery suggested by brntwrmn oj the Simviation forum. . Airbus KC-130M (A330 MRTT) model by Thomas Ruth. MRTT VC modified from the default A321 by Thomas Ruth. Includes MRTT manual. Custom A330 sounds and checklist included. FSX users: requires either FSX Acceleration or Service packs 1 & 2. Textured, assembled and tested for P3Dv5.3 by Chris Evans Should also be fine in FSX and earlier P3D versions.

F/A-18 Swiss Air Force J-5002 for P3D and FSX. Finland use 2 FA-18C for training and 55 FA-18C for combat. Model Jamal Ingram, Corrado La Posta Assembled by Danny Garnier

FSX/P3D Boeing 737 Max 8 Icelandair n/c blue package with Max VC. Icelandair is based at Keflavik International Airport and currently have 8 Boeing 737 Max 8 with another 2 on order. This is the new 2022 Icelandair livery. The high spec Boeing 737-Max 8 and paintkit from TDS. Credits go to TDS fantastic native FSX Boeing Max8 model and paintkit. The VC is the Microsoft/Alejandro Rojas Lucena/FSND base modified by Speedbird77 to resemble a Max cockpit, including gauges by G. Munro. There are custom CFM eco sounds included for that extra realism. Use - Instrument panel - Util for ground vehicles, doors stairs, fuel truck, buses. New Utility allows Bus, fuel, doors and more. (Go to Views - Instrument panel - Utility). VC added and edited to allow correct VC views, correct jetways and wheel levels. I added PDF B737 checklist. Textured, packaged and prepared for FSX & P3D up to v5 by Chris Evans.

This package is for use with the payware Nemeth/MilViz CH-47D. The pack includes 8 firefighting liveries as well as 4 internal tank/snorkel options and a 2,000 gallon bambi bucket assets for attachment using Lorby's FireFighterX application. The CH-47 Chinook, or Boeing 234 has been used in aerial firefighting for decades. However, recently surplus airframes are being retrofitted with internal tank systems similar to those found in fixed wing counterparts. Eliminating some of the hazards/restrictions associated with the use of bambi buckets. In addition, most of the internal tanking systems range from 2,500-3,000 US gallons of water or retardant. Greatly increasing the amount that can be dropped by these large helicopters. This package includes liveries for the following operators; Billings Flying Service, California Army National Guard, Columbia Helicopters, Coulson-Unical, Helimax Aviation, and Helifor. Repaints are compatible in both FSX and P3D, but the tank and bucket assets are only compatible in P3Dv4+. Lorby SI FireFighterX and Nemeth CH-47 are required to use the contents of this download. Repaints and firefighting assets by Nicholas Mitchell.

FSX/P3D Boeing E767 NATO Airborne early warning and control (AEW&C). The E767 was designed for the Japan Air Self-Defense Force. This fictional NATO version. NATO does use the E3 Sentry. This is basically the E3 radar installed on a military 767 aircraft. Includes military themed VC and revised textures. FSX Native E767 AEW&C model by TDS. Package includes military themed 737-800 VC by Alejandro Rojas Lucena/FSND/Ken Wiggington upgraded Boeing 737-800 VC model. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS). Includes added MFD and PFD panels. Exits, wheel levels, jetways and views corrected for FSX/P3d. See VC docs to get the best out of the VC and FMC. Textured and texted in P3D 5.3 by Chris Evans. Should also work in earlier P3D versions as well as FSX.

FSX/P3D Bombardier Challenger 300 Rega (air rescue) package. . Swiss air ambulance service Rega is based at Zurich and currently has 3 Bombardier Challenger 650 aircraft. This Challenger 300 is reasonably near to the 600 and was designed by Richie Schwertfeger. It's a pretty aged design but reasonable enough even today as freeware. Repainted by request from 'Vane' on the Simviation forums. Repainted by Chris Evans.

FSX/P3D ATR72-210F ASL Airlines Switzerland (Farnair) o/f DHL package. ASL Switzerland (Farnair) operates humanitarian and cargo flights from it's base at EuroAirport Basel Mulhouse, Switzerland. Model and VC by Virtualcol. Ex payware. Textured and assembled for P3Dv 5 (and should be ok in FSX and earlier P3D versions) by Chris Evans.