Beriev Be-12 Chaika (Seagull) NATO reporting name: MAIL FSX/P3D. Multi-purpose maritime reconnaissance, electronic warfare, anti-submarine and SAR amphibian flying boat of the AVMF. A few remain in use to this day. Evolved from the Be-6, and designed in parallel with the Be-10, the Chaika was a dedicated ASW machine developed to counter George Washington/Polaris A-1 SSBN's, as initially designed, with the SKAT nuclear depth bomb. FSX 2021 native conversion of this all new, and excellent Be-12 by Doson, Gritsevsky, Wishmaster, DZIES. With the kind permission of Doson. The model does not have a VC modelled, so our trusty An-32 by Piglet has donated a VC. It's pretty close, and does the job nicely. The model also had no flightcrew, so a set of Piglet aircrew were slid in. Vlads dear old, and terribly inaccurate Mail, can go to a well deserved retirement after 19 years of service. Doson's is accurate in shape and dimensions, very fast FPS, pretty good for drawcalls, and looks great. The Mail is a challenging modelling job, and these boys have him just right. Model by Doson, Gritsevsky, Wishmaster, DZIES VC by Tim Conrad. FSX conversion, extra paints by Y.T.

Beriev Be-12 Chaika (Seagull) NATO reporting name: MAIL Multi-purpose maritime reconnaissance, electronic warfare, anti-submarine and SAR amphibian flying boat of the AVMF. A few remain in use to this day. Evolved from the Be-6, and designed in parallel with the Be-10, the Chaika was a dedicated ASW machine developed to counter George Washington class SSBN. FS9 2021, all new, and excellent Be-12 by Doson, Gritsevsky, Wishmaster, DZIES. The model does not have a VC modeled, so it's 2D for the FS9 folks. Vlads dear old, and terribly inaccurate Mail, can go to a well deserved retirement after 19 years of service. Doson's is accurate in shape and dimensions, very fast FPS, pretty good for drawcalls, and looks great. The Mail is a challenging modelling job, and these boys have him just right. Model by Doson, Gritsevsky, Wishmaster, DZIES Extra textures by Y.T. A huge B-Z to the crew that put this badboy together.

Stockholm, Sweden part 2. Stockholm is the capital of Sweden. It has the most populous urban area in Sweden as well as in Scandinavia. 1 million people live in the municipality, approximately 1.6 million in the urban area, and 2.4 million in the metropolitan area. The city stretches across fourteen islands where Lake Mälaren flows into the Baltic Sea. Outside the city to the east, and along the coast, is the island chain of the Stockholm archipelago. The area has been settled since the Stone Age, in the 6th millennium BC, and was founded as a city in 1252 by Swedish statesman Birger Jarl. It is also the county seat of Stockholm County. Credits: This scenery has been extracted from Google Maps, hence all 3D credits goes to Google. This scenery has been generated with the Google Earth Decoder tool (credits to /u/Jonahex111): https://www.reddit.com/r/FS2020Creation/comments/j3faaj/google_earth_decoder_now_userfriendly/ Addon history: v1.0: initial release v1.1: update colorimetry: reduce magenta tint Installation: Extract both thalixte-stockholm1, thalixte-stockholm2 and thalixte-stockholm3 folders into the Community folder. Notes on the RAM usage: This scenery uses a lot of RAM. If you have less than 24GB you may need to increase your page file and make sure it is placed on an SSD drive for better performance.

Stockholm, Sweden part 1. Stockholm is the capital of Sweden. It has the most populous urban area in Sweden as well as in Scandinavia. 1 million people live in the municipality, approximately 1.6 million in the urban area, and 2.4 million in the metropolitan area. The city stretches across fourteen islands where Lake Mälaren flows into the Baltic Sea. Outside the city to the east, and along the coast, is the island chain of the Stockholm archipelago. The area has been settled since the Stone Age, in the 6th millennium BC, and was founded as a city in 1252 by Swedish statesman Birger Jarl. It is also the county seat of Stockholm County. Credits: This scenery has been extracted from Google Maps, hence all 3D credits goes to Google. This scenery has been generated with the Google Earth Decoder tool (credits to /u/Jonahex111): https://www.reddit.com/r/FS2020Creation/comments/j3faaj/google_earth_decoder_now_userfriendly/ Addon history: v1.0: initial release v1.1: update colorimetry: reduce magenta tint Installation: Extract both thalixte-stockholm1, thalixte-stockholm2 and thalixte-stockholm3 folders into the Community folder. Notes on the RAM usage: This scenery uses a lot of RAM. If you have less than 24GB you may need to increase your page file and make sure it is placed on an SSD drive for better performance.

FSX/P3D Airbus A319-100 Latam Travel package (Especial Livery from Brazilian Airlines). Texture for Project Airbus. (with Virtual Cockpit). Texture by Rafael Matias

FSX/P3D Airbus A310-300F Royal Jordanian Cargo package. Royal Jordanian has 1 Airbus A310-300F used for cargo flight. The Airbus A310-300 is a wide bodied aircraft 1st flown in 1982 and developed from the A300. The last A310 delivered was in 1998. This is the A310-300GEF model by Thomas Ruth in FSX native format and A310 VC. Model and VC by Thomas Ruth. Includes FMC by Garret Smith. Includes A310 operation manual. Airbus sounds included. Textured and assembled for P3D v5 by Chris Evans. Should work in FSX and other P3D

Stockholm is the capital of Sweden. It has the most populous urban area in Sweden as well as in Scandinavia. 1 million people live in the municipality, approximately 1.6 million in the urban area, and 2.4 million in the metropolitan area. The city stretches across fourteen islands where Lake Mälaren flows into the Baltic Sea. Outside the city to the east, and along the coast, is the island chain of the Stockholm archipelago. The area has been settled since the Stone Age, in the 6th millennium BC, and was founded as a city in 1252 by Swedish statesman Birger Jarl. It is also the county seat of Stockholm County. Credits: This scenery has been extracted from Google Maps, hence all 3D credits goes to Google. This scenery has been generated with the Google Earth Decoder tool (credits to /u/Jonahex111): https://www.reddit.com/r/FS2020Creation/comments/j3faaj/google_earth_decoder_now_userfriendly/ Addon history: v1.0: initial release v1.1: update colorimetry: reduce magenta tint Installation: Extract both thalixte-stockholm1, thalixte-stockholm2 and thalixte-stockholm3 folders into the Community folder. Notes on the RAM usage: This scenery uses a lot of RAM. If you have less than 24GB you may need to increase your page file and make sure it is placed on an SSD drive for better performance.

Today's mission you will be flying to 5 off shore islands in and around the British Isles to deliver supplies and cargo, some of the runways are short and narrow, so prepare to use your flying skills for short fields takeoff and landings. Good Luck!

Ibiza city and surrounding areas based on Goole Maps photogrammerty. Check map of included area in screenshots. Installation Unzip both files on community folder. Use 7-zip if you have problems unzipping. Notes This scenery uses a lot of RAM. If you have less than 32GB you may need to increse your page file and make sure it is placed on an SSD drive for better performance. Credits Jonahex111 (Goolge Earth Decoder) thalixte (Optimization tool for Google Earth Decoder) Google Maps

Global Classic A.I. Ship traffic V1, ship locator. This is a data program to help you locate the vessels in Henrik Nielsen's wonderful 'Global Classic A.I. Ship traffic V1' program. My locator program contains: A folder for Google Earth with the routes shown, the number of the route and what ships are on that route. A sailings list with departures and arrivals of each route. A list of all the ships names and the routes you can find them on. This program isnt FSX or P3d dependant. by Carl Vokes