P3dV3 (only) Sceneries with two WWII like airbases. Since there are hardly to find any WWII Sceneries for German aircrafts I have buildt two fictional and non historical airbases placed on default German airports. I made them just using units of my other sceneries and my proposal was to have a base for my German warbirds. I had no intension to create any historical site! One big airbase is at Rammstein (Airport.ID=ETAR) and a small airbase is placed at Bentlage/Army (Airport.ID=ETHE). DON'T INSTALL IT IF YOU HAVE ADDONS AT THIS AIRPORTS! My sceneries provides bunker hangers with Focke Wulf Ta-154 Moskitos, barracks, a military university, an old castle and arround Bentlage you will find even a eight km long railroad with a cargo train. The files are proposed for the default AddonScenery-Scenery/Texture folders and they are self activating. So just copy and paste it into the correct folders and start your P3d. You will find it with the airpord IDs. Sceneries by Erwin Welker

Dear Friends ... My sincerest apologies for wasting your time. I have discovered my mistake of not checking in the rush to upload this file to Simviation the fact that the VC of the T-38 Talon on both panels is not functional in FSX / Aceleration, due to the limitations of the model being transported from FS2002 . It is not the case of P3Dv3 where I have personally reconfigured and tested it. There it works perfectly. I apologize and your help if possible to find a solution to this problem. Beginner error. I hope you can fly it in P3D. An additional detail ... uncheck mipmap option in graphics configuration. I hope this serves as comfort while we study how to find a solution. Greetings.

FS2004/FSX Lufthansa (DLH) Airbus A340-300 new livery, registration D-AIFD. High definition textures only for the payware CLS Airbus A340-300 base package. Fixed a texture error on the left side that made it invisible. Repaint by Miguel Pena.

FSX/Steam/P3D4 ATR 42-500 Olympic Air package. This is a photoreal Livery of the new Olympic Air colors of the Virtualcol FS Software model. The Main Fuselage and Engines are in 2048x2048 px DXT3 format for improved texture quality with Alpha channel glare added. There is a full V.C., two different 2D panels and multiple camera views. The model features animated VC Yokes, engine controls, exit, control surfaces and landing gear. Also animated Front Cargo door and ground services (shift+W). I have enhanced many interior and exterior details. Complete package with sound effects and gauges. Olympic colors by Hellenic Aircraft/Yiannis Katehis Tsetsas 2019.

Missing radio gauge for P3D Aircraft. Many of the Boeing aircraft have a missing radio gauge because the required 'b737-400' gauge was not included in P3D versions. Just add the enclosed gauges to the main Gauges folder in P3D.

Photoreal Animated 2D Panel Yokes.Theese Gages were created to add more realism to the 2D panels especialy for models with no V.C.It is ment mostly for developers but if you follow the instructions you can add them to any of your 2D panels.There are two seperate Yokes one for the pilot and one for the F.O. that can be used at will as panel gauges or you can create a pop up window.The textures are of the King Air series (C90 B200 350 etc) but you can change them to any other yoke if you have a good photo of it.The yokes are rotating according to aileron position movement and are in 700x700 px 8 bit format for extra clarity. By Hellenic Aircraft/Yiannis Katehis Tsetsas 2019.

The Northrop T-38 Talon is an advanced training aircraft normally used for teaching techniques at supersonic speeds, acrobatics, training, night flights by instrumentation and navigation to newly graduated pilots. In the United States, more than 60,000 pilots have used it as a coach. The T-38 Talon is also used by NASA to train its astronauts. This is a total review and packaging of T-38 Talon of FSD Design Team to whom all the merits go for giving us this excellent model. Changes were made in vc cockpit, gauges, sounds, afterburner and smoke effect, vc glass, and vc glass cabin design approximate to the real T-38C model. In addition to 37 skins for use in FSX up to P3D v3 tested (not compatible with P3D4+). Thanks to those who have made previous updates and skins. Enjoy your training ...

FSX/P3D Boeing 727-200 Southwest Airlines Package. Southwest operated the Boeing 727-200 between 1979 and 1987, the only non 737 aircraft Southwest flew. Boeing made the classic 727-200 between the early 1960's to 1984. It has a max. range of 2700nm. Boeing 727-200 model by TDS/ Tenkuu Developers Studio with Thomas Ruth's great Boeing 727 VC added. Includes utility for ground services, Passenger bus, cargo, stairs, refuelling truck etc (find it under - Views - Instrument panel - Util) Thomas Ruth VC added and aircraft.cfg edited to allow correct VC views. The VC includes working wipers, Honeywell FMC and more. See Panel manual for more info. TDS native FSX Boeing 727-200 model. See panel docs to get the best out of the VC. Zip preview for more imgages. Textures and assembled for P3D v4.5 and should be ok in older P3D & FSX by Chris Evans

FSX/FSX-SE KMCI New Airport, Kansas City, Missouri (MO), USA. This is a replacement for the default KMCI, Kansas City International Airport at Kansas City MO. The present three separate terminals are going to be replaced with a single terminal with legs extending from the main terminal with the airline gates. It is being constructed at this time and suppose to be finished and fully operational sometime in 2022. The airport is remaining at the same location as the present airport. This is just my concept of a new single terminal airport at this location and not a duplicate of what is being constructed. All gates are assigned with the airlines that service KMCI at this time. A lot of eye candy has been added around the airport both on the airport grounds and off airport. Hope you can enjoy the new future concept for this airport. By Dick Mohatt.

FSX/P3Dv4 Curtiss JN-4D Mass production of aircraft in the United States began with the Curtis JN "Jenny" series (over 6000 built). This JN-4D model aircraft is produced from FS9 source files included with the FS9 SDK. The source files were modified to provide FSX/P3Dv4 compliant exterior and interior models while retaining compatability with existing FS9 repaint skins such as those available on the Ford Tri-motor Project website, by Dave Carroll