FSX/P3D Airbus A350-900 XWB United Airlines 2019 colors package. Founded as Varney Airlines in 1926, United is now the world's 3rd largest airline with a current fleet of over 780 aircraft flying globally. United is introducing this new livery in 2019. As of June 2019, United have 45 Airbus A350-900 on order. Added Garmin G1000 MFD and PFD popups and added FSX Garmin G1000 user maual. Added the better Thomas Ruth VC with updates by Louis Quintero and Chris Evans. Use FMC under Views/Instrument panel in FSX menu. (FSX : Go to Views -Instrument Panel. P3D: Go to Vehicle - Instrument panel). Added better views. Textures by Adam Hamada. The Airbus A350 XWB is a family of long-range, twin-engine wide-body jet airliners from the European aircraft maker Airbus. The A350 is the first Airbus aircraft with both fuselage and wings made mainly from carbon fibre structure. The A350 is intended to replace the A340 and compete with Boeing's 787 and 777. Textured, assembled and tested in P3Dv4.5 and should be ok in FSX and earlier P3D versions by Chris Evans.

FSX/Acceleration/P3dV3 Vought SB2U Vindicator improved textures for that prewar carrier based dive bomber. The two repaints are for the update package from Michael Pook. The convertion from CFS2 to FSX/P3Dv3 was made by Erik Hertzberger. The repaints has no historical reference but they looks a bit more photorealistical than the old CFS textures. The model provides folding wings and an animated gunner. Please add or replace the two texture sets to the preinstalled package. By Erwin Welker

Textures for the Rick Piper HS-748 Series 2A in Trinidad and Tobago Air Services - TTAS 1980 colors. The freeware Hawker Siddeley HS-748 by Rick Piper is needed for this repaint. The more modern turboprop HS-748s replaced the DC-6Bs on all TTAS routes by 1978. They were consequently all absorbed by BWIA, after the merger with TTAS in 1980. Textures are 32bit bmp. This repaint was tested on FSX-SE. It should work on FSX & P3D v1-3.

Textures for the CalClassic Douglas DC-6B in Trinidad and Tobago Air Services - TTAS colors. The freeware CalClassic DC-6B by Greg Pepper and Tom Gibson is needed for this repaint. The government of Trinidad and Tobago formed TTAS at Port of Spain on June 12, 1974 to take over the Port of Spain to Tobago service suspended upon the failure of Caribbean United Airlines. With a pair of Douglas DC-6Bs, TTAS, became the second national carrier, and undertook air bridge flights to Tobago, as well as routes to Grenada, Martinique, and St. Lucia. The DC-6Bs were replaced between 1977 and 1978 by HS-748s. After a short lifespan of 6 years, TTAS was taken over and merged into the main Trinidad and Tobago national carrier - British West Indies Airways, in 1980. Textures are 32bit bmp. This repaint was tested on FSX-SE and should work on FSX & P3D v1-3. It should also work on FS2004.

FS2004/FSX Price Ultimate 10 DASH 300s. The 10 Dash Model 100 was designed as sport biplane that could be either bought assembled or for amateur construction from either plans or a kit. A competition aerobatic variant, the 10 Dash 300 is fitted with either a 300 hp (224 kW) or 350 hp (261 kW) Lycoming engine with a three-bladed propeller. Produced by Canadian pilot Gordon Price's Ultimate Aircraft Ltd, the 10-300s was the pinnacle of a series of developments which started life as upgrade packages for the Pitts Special aerobatic bi-plane. GMAX mdl by A.F.Scrub

FSX/P3D Boeing 747-8i Cathay Pacific package with enhanced VC. Cathay Pacific operate 14 Boeing 747-8i flying to destinations worldwide. The Boeing 747-8 Intercontinental can carry over 400 passengers at a speed of 1055km/h or 570 knots (656mph). Skyspirit FSX Native Boeing 747-8i assembled and upgraded for Prepar3D 3 & 4 + FSX with the developed B747 VC (virtual 3d cockpit) from Alejandro Rojas Lucenda (Manual included). This is the Project Opensky FSX native Boeing 747-8i GenX model, and includes ground cargo servicing, stairs (FSX - Go to Views - Instrument Panel -Posky Utility), opening nose section and more. Included CF engine sounds from BrandonG, with realistic jet whine to make your flight sound great. Thank you to Skyspirit/Project Opensky for their outstanding donations to the worldwide community of flight simulation. Textures by me. Also includes the Boeing 747 VC textures upgrade. This give a much clearer 747 interior virtual cockpit look. Added the textures by Stian Svensen. Assembled and tested in P3D4 by Chris Evans. Should also work in FSX and earlier P3D versions.

FSX/Acceleration/P3dV3 Lamborghini Countach LP500S. This was one of the most exiting serial produced super sport cars of that era, built between 1982 and 1985. The model has a photorealistical 2D panel and a matching VC. The special gauges, effects and lights are made by Pierre J. Carosin. The FSDS 3.5 models with panels is made by Erwin Welker.

FSX/P3D3 Piper PA L-21A Super Cub upgraded V.2.0.This is my second upgrade of the photoreal livery package of Piper PA L-21A.The Piper "L" series is the military designation of the Super Cub.There are two Vc and 2D panels(Vintage & modern) to choose from.On this version there are more exterior details as well a more improved interior.Also a new vintage photoreal panel and gauges.The modern panel now includes light switches and primer button.The Hellenic Army Aviation used this specific id# 870 Super Cub as a trainer and artilery observation plain at the 198 MEPAR(Unit or Aerial Observation)at Kozani in Greece.In total as many 25 of types L-18C/L-18b/L-21 A/B where used by the Army Aviation (Aeroporia Stratou) from 1949-1981.Gloss textures,2D panel,sound & Historical info.Model by J.E.Narcizo.Repaint FSX/P3D3 updates & new panels by Hellenic Aircraft/Yiannis Katehis Tsetsas 2019. File size:(18.7 MB)

The Vought SB2U Vindicator was an American carrier-based dive bomber developed for the United States Navy in the 1930s, the first monoplane in this role. Obsolete at the outbreak of World War II, Vindicators still remained in service at the time of the Battle of Midway, but by 1943, all had been withdrawn to training units. This is an FSX update of the Vindicator, mainly featuring new VC and 2D panels with authentic instruments based upon the real panel. The model now has navlights as well as vclight and smoke effect. Included in the package are eleven nice texture sets. Thanks to Erik Hertzberger for converting this model from CFS2 to make it flyable in FSX. The model will probably work in P3D, version3, but no guarantee. New panels and lights and smoke configuration by Michael Pook.

This is Mike Stone's T-39 Sabreliner repainted as N61RH, the Evergreen sponsored plane that R.A. "Bob" Hoover performed aerobatics in. The airplane is now kept in storage at the Sparta College of Aeronautics and Technology in Tulsa, OK.