FS2004/FSX Flight Analyzer Utility V4.09 Flight Data Recorder - Logbook. NOW WITH STATISTICS TOP 5 AIRPORTS, CITIES AND COUNTRIES. Very easy to use, just make a flight plan in the simulator or in this utility. What this program do: - quickly change the settings of FSX/Fs2004, such as time, date, fuel, weight, traffic etc. - start a failure sytem, such as gear, flaps, engine, etc. - freeze the time, so you can fly in a for everlasting sunset. - runway detecting system to see wich runways are in use. - flight analyzing/data recording from departure to parking at the gate. - When flight analysis is finished you can print a report, the report is automaticly saved as pdf File. - graphical landingchart. - record all your flights - quickly look to your FSX display settings (only FSX) and change them even before the flight simulator is running. - After a flight is finished FsQC saves your flight automaticly as 'FsQC last Flight', so you can continue the next day or hour. Flight analysis start recording at the moment when you begin taxiing. It gives you huge information such as: - takeoff- and landing-weight. - takeoff- and landing-roll in m. and ft. - separate fuel consumption in taxi, climb, cruise and descent. - maximum banking in flight. - which speed you using the flaps and gear. - when autopilot on or off. - vertical speed on touchdown. - reverser set after landing. - wich speed you cancel reverser. - bouncing at landing. - graphical landingchart. - and lots of more. You can better look the example of the pdf document located in the 'Flight Reports' folder. Logbook records: - fuel consumption. - payload. - distance. - number of different airports. - flight hours. - landings. - flaps. - speed. - and lots of more. - quickly show touchdown wind information in a picture. - quickly show the graphical landing chart. - Now with statistics: top 5 Countries, Cities and Airports Requirements: Computer with vista or higher and internet access. Microsoft .net framework 4.6 or higher.(free download on microsft.com) Flightsimulator FSX or 2004 and FSUIPC installed. Note: requires paid activation for full use. Register and you have 1 month free. Program fully works without registration at airport Athens and Iraklion (Greece)

FSX/P3D Robin DR400 Pack 3. All private liveries: F-GNNK (Aeroclub Montendre-Marcillac, Gironde, France), OE-DFS, and HB-KFY (LSMF, Motorfluggruppe Mollis, Switzerland). Original DR400 Robin model and VC by Yannick Lavigne, Fred banting and Rob Young, converted to FSX native by Bluebear. I included the textures by Christian Daboudet, Pascal Kuffer as well as the converted textures by Bluebear. Converted new textures to DDS format and added small shine. Edited panel to fix non compatible gauges. Famouse for it's bent wing, The Robin DR400 is a wooden framed light aircraft made in France and commonly used by flight schools as well as private pilots. Assembled and tested in P3Dv4.2 by Chris Evans Should also be fine in FSX and earlier P3D versions.

KTVC, Cherry Capital Airport, Traverse City Michigan USA, for FSX. New setup of this airport. I used FreeMeshX for mesh. Tim van Ringen

FSX / P3D v3 Update of Nakajima Ki-43 Hayabusa (peregrine falcon). This was a fighter single-engine tactical used by the Imperial Japanese Army Air Service during the WWII. Its official designation of the Japanese army was Hunting Type 1 and its code name for the Allies was Oscar, but American pilots used to call the Army Zero (Army Zero) for its resemblance to the Mitsubishi A6M Zero of the Imperial Japanese Navy. Its designer was Hideo Itokawa, who would later become famous as the pioneer of Japanese rocketry. On the model of Akemi Mizoguchi make improvements in VC cockpit, gauges, propellers, and other details. All the merit to its creator and to enjoy ....

FSX / P3D v3 Update of Kawanishi J6K1 Jinpu. This would be a conventional interceptor developed to meet Japanese needs during the war. It would initially be powered by a Nakajima NK9A0 (HA45-42) a radial piston engine, with forced cooling and a three-speed mechanical supercharger in the nose; the engine would have four propellers. However, the project has changed and the aircraft would be powered by a Homare 42 engine. The cab was designed to have a single seat and adjusted behind the engine in the typical manner. Engineers estimated a maximum speed of up to 685 kilometers per hour, with an exceptional range of about 5.5 hours and a capacity to fly to a maximum height of 10.060 meters. On the William Dickens model, make changes in flight characteristics, VC glass and gauges, propellers and others for use in FSX up to P3D v3. Thanks to the author of this magnificent model and to enjoy ...

FSX / P3D v3 Update of Yokosuka D4Y Suisei (comet). This was a dive bomber of the Imperial Japanese Navy. The code of the allies was Judy. The D4Y was one of the fastest dive bombers of the entire war. Despite its limited use, its speed and autonomy made it effective in reconnaissance missions as well as in kamikaze attacks. They were built in several versions up to a total of 2,038 copies, mostly by Aichi. On the CFS2 model of Thicko, make changes of VC cockpit and glass, gauges, propellers, and flight characteristics for its operation in FSX up to P3D v3. All the merits and thanks to its creator. Original textures by Morton. Enjoyment.....

SEPECAT Jaguar M for FSX and FS9 with changes and additions. The Jaguar M was intended to operate from an aircraft carrier, his structure had been strengthened accordingly, also was equipped with a modified landing gear. The nose gear was lengthened and the main gear consisting of a single wheel. Developed by Sepecat (Dassault-Breguet and BAC). Author: Tsyntsar Victor, Kyiv, Ukraine, 2019. Model version 2.0

FSX/P3D Robin DR400 4 More Livery Pack 2. All private liveries: F-GNNR (Annecy-Meythet (LFLP)), F-GCIJ (aeroclub Rouen-Normandie), D-EGVZ and G-BZIJ. Original DR400 Robin model and VC by Yannick Lavigne, Fred banting and Rob Young, converted to FSX native by Bluebear. I included the textures by Nicolas PESSAY, Mike Formatschek, Patrick Machabert as well as the converted textures by Bluebear. Converted new textures to DDS format and added small shine. Edited panel to fix non compatible gauges. Famous for it's bent wing, The Robin DR400 is a wooden framed light aircraft made in France and commonly used by flight schools as well as private pilots. Assembled and tested in P3Dv4.2 by Chris Evans Should also be fine in FSX and earlier P3D versions.

FSX/Acceleration/FS2004/P3dV3 Chevrolet Corvette C3 Indianapolis pacecar from 1978. The model comes with photorealistic 2D panel and equal VC. The T-roofs and the hood with the V8 engine underneath are animated. The special gauges and lights are made by Pierre J. Carosin. The FSDS 3.5 models with panels are made by Erwin Welker. The special gauges and lights are made by Pierre J. Carosin.

FSX/P3D3 ATR 42-500 upgraded package.There are 2 models of the F. Sanchez-Castaner ATR 42-500 with improved photoreal VC some new gauges and problems fixed.In fact all the textures Interior and exterior are photoreal from the real aircraft in HD 2046x2046 DXT3 with alpha (gloss) mode.There are two different (day and night) 2D panels overhead panel,gps and radar.Yoke textures are replaced with photoreal and problems in co-pilots face are also resolved.The Livery is the Skyexpress SX-GRI wich is based on the Island of Crete Greece.There are also new VC camera views.Complete package with sound,checklist and manuals.By Hellenic Aircraft/Yiannis Katehis Tsetsas 2019. File size:(46.7 MB)