This is a repaint for the amazing Project Airbus A320-200. It includes the base model, high-quality textures, and a VC. Air Canada currently has 18 Airbus A320-200s under it's mainline fleet, and 6 more under Air Canada Jetz, making it the most common variant of the A320 family the company flies. As of this release, C-FKPT flies under Air Canada's "Jetz" brand. Air Canada maintains a fleet of all-business-class aircraft for chartering groups such as major sports teams (Toronto Maple Leafs, Toronto Raptors, etc.), high-profile individuals, and government officials under its Jetz brand. The exact variant of this aircraft is an Airbus A320-211 which is outfitted with CFM56-5A1 engines. It flies the FIN number of 225. Includes: - Base Model Airbus A320-200 aircraft by Project Airbus - Textures for Air Canada livery. - Air Canada Airbus A320-200 C-FKPT - Full working VC

White Spinner Textures for the Skyspirit's Boeing 777-300ER by Hothaifah.

This is a repaint for the amazing Project Airbus A319-100. It includes the base model, high-quality textures, and a VC. Air Canada currently maintains a fleet of 5 Airbus A319-100s, making it the least common variant of the A320 family the company flies. As of this release, C-GARG is the only one of Air Canada's A319-100s that has received the company's new livery, which was updated in 2017. In all likelihood, it will probably also be the only A319 to receive this updated paint job, as the company is looking to slowly phase out the usage of it's A319 aircraft. This is not the first repaint released for C-GARG, but it is the most accurate depiction of the aircraft you will find for FSX, payware or otherwise. WHAT in the world is wrong with the left engine? Nothing! The number one engine on the real-life C-GARG actually looks like that. In fact, the whole rear cowling of the engine used to be toothpaste green. That has since been replaced with the correct black cowling, but the forward cowling is still toothpaste green. Why? Because it was replaced during maintenance, and since C-GARG is the only A319 in the entire fleet with the updated livery the only part they could replace it with was the cover from the old livery. For realism, that anomaly has been replicated in this release. Includes: - Base Model Airbus A319-100 aircraft by Project Airbus - Textures for Air Canada livery. - Air Canada Airbus A319-100 C-GARG - Full working VC

This is the ex payware F-14 Tomcat from Iris Simulations. Now freeware for FSX and P3D. Includes manual, self install files as well as paintkit.

Boeing 777-300ER in the old American Airlines livery. Model by Skyspirit2012. Effects by Project Opensky. Original liveries by Xudeva Irribarra, TIM BO, Chris Evans, TJ, Luis Quintero, Danny Garnier, Philip Foglar, Tim Garner, all of which are re-worked and edited by Hothaifah. VC & gauges by Jacob Kubique, Zachary777, Speedbird77, G. Munro, and Ken Wiggington. GE90 sound pack by SkyHigh Audio Simulations, and Audiosim. Reworked model's radius & bounding box by Hothaifah using RADItor. Reworked lights with the addition of new lights by Hothaifah. New camera views by Hothaifah. **Note: Logo Lights are implemented in 3 ways: 1.Night textures, 2.Connected with Wing Lights, 3.Logo Lights, Logo Lights for the Skyspirit model are bugged even though I've created the necessary files for them, so the solution is to turn Logo lights OFF and use the Wing Lights or Leave it appear with the Night textures.

This package includes a complete aircraft with 4 jetBlue liveries. They are: Balloons (David Neeleman), Ribbons (A NEO Mintality), Streamers (Minty McMintface), and the brand-new Mint Leaves (Minternationally Recognised). Model by Project Airbus with NEO engine mod by Bret Herman. Updated VC by Speedbird77 with built in FMC by Garret Smith. PW1100G sounds included. Assembled and textured for FSX and P3D by Dbob. Already includes the model fix.

Boeing 777-300ER in the old American Airlines livery. Model by Skyspirit2012. Effects by Project Opensky. Original livery by Xudeva Irribarra, Edited by Hothaifah. VC & gauges by Jacob Kubique, Zachary777, Speedbird77, G. Munro, and Ken Wiggington. GE90 sound pack by SkyHigh Audio Simulations, and Audiosim. Reworked model's radius & bounding box by Hothaifah using RADItor. Reworked lights with the addition of new lights by Hothaifah. New camera views by Hothaifah.

This is an update for FSX of the F-35C by Dino Cattaneo and modified by Philippe Wallaert. I added the 4th wheel and repositioned the contact points; I added an autopilot and a fuelstat gauge to the panel, in windows, so I would not have to spend the time to figure out the gauges on the panel; changed the size and position of the red and green nav lights; repositioned the tail hook and added a launch assist section; deleted the 4x3 panel; adjusted the position of the HUD on both panels; and I updated the flight dynamics.

This is a repaint for the amazing TDS Boeing 737-600NG. It includes the base model, high-quality textures, a VC, and custom ground service vehicles. Canadian Airlines never flew the Boeing 737-600NG. Canadian Airlines did fly a fleet of 77 737-200's and -300's. However, in our new universe, Canadian Airlines has taken delivery of one single Boeing 737-600NG, which is available to fly any route of your choice. It flies under the fictional registration C-GPXA and the tail number 566. About the Livery Upon its founding in 1987, Canadian Airlines revealed its new livery using the colours light grey, dark grey, navy blue, and red. The paint scheme was an adaptation of the recently introduced livery from its predecessor Canadian Pacific Airlines. The lower half of the aircraft's body was navy blue, topped with light grey and red stripes, while the tail was blue, with approximately one-third taken up by the carrier's new logo. The new Canadian Airlines logo was a combination of Canadian Pacific's five grey stripes, representing the five continents served by the carrier. Over these stripes was a thick, bright red chevron. The chevron was a simplification of the Pacific Western Airlines logo. The chevron was placed over the stripes, which then represented "Wings over 5 continents". It was also an ingenious and subtle way to represent the takeover of CP by PWA. The same logo, in a square form, became a clever alternative to a true bilingual name on the fuselage replacing the French "e", and the third "a" in English (Canadian/Canadien). Includes: - Base Model Boeing 737-600NG aircraft by TDS - Textures for Canadian Airlines livery. - Canadian Airlines Boeing 737-600NG C-GPXA - Full working VC upgraded to HD by Enrique Cornejo - Custom Canadian Airlines CT Services (Modeled by TDS, Painted by Julian Flight) - Custom Canadian Airlines Cargo Loading Services (Modeled by TDS, Painted by Julian Flight) - Custom Canadian Airlines Passenger Shuttle (Modeled by TDS, Painted by Julian Flight) - Custom Canadian Airlines Empress Lounges AirStairs (Modeled by TDS, Painted by Julian Flight) - Custom Shell VIPjet fuel services (Modeled by TDS, Painted by Julian Flight)

This is a repaint for the amazing TDS Boeing 737-700NG. It includes the base model, high-quality textures, a VC, and custom ground service vehicles. Canadian Airlines never flew the Boeing 737-700NG. Canadian Airlines did fly a fleet of 77 737-200's and -300's. However, in our new universe, Canadian Airlines has taken delivery of one single Boeing 737-700NG, which is available to fly any route of your choice. It flies under the fictional registration C-GPWI and the tail number 564. About the Livery Upon its founding in 1987, Canadian Airlines revealed its new livery using the colours light grey, dark grey, navy blue, and red. The paint scheme was an adaptation of the recently introduced livery from its predecessor Canadian Pacific Airlines. The lower half of the aircraft's body was navy blue, topped with light grey and red stripes, while the tail was blue, with approximately one-third taken up by the carrier's new logo. The new Canadian Airlines logo was a combination of Canadian Pacific's five grey stripes, representing the five continents served by the carrier. Over these stripes was a thick, bright red chevron. The chevron was a simplification of the Pacific Western Airlines logo. The chevron was placed over the stripes, which then represented "Wings over 5 continents". It was also an ingenious and subtle way to represent the takeover of CP by PWA. The same logo, in a square form, became a clever alternative to a true bilingual name on the fuselage replacing the French "e", and the third "a" in English (Canadian/Canadien). Includes: - Base Model Boeing 737-700NG aircraft by TDS - Textures for Canadian Airlines livery. - Canadian Airlines Boeing 737-700NG C-GPWI - Full working VC upgraded to HD by Enrique Cornejo - Custom Canadian Airlines CT Services (Modeled by TDS, Painted by Julian Flight) - Custom Canadian Airlines Cargo Loading Services (Modeled by TDS, Painted by Julian Flight) - Custom Canadian Airlines Passenger Shuttle (Modeled by TDS, Painted by Julian Flight) - Custom Canadian Airlines Empress Lounges AirStairs (Modeled by TDS, Painted by Julian Flight) - Custom Shell VIPjet fuel services (Modeled by TDS, Painted by Julian Flight)