The Kawasaki Ki-61 Hien ("flying swallow") is a Japanese World War II fighter aircraft used by the Imperial Japanese Army Air Service. The Japanese Army designation was "Army Type 3 Fighter" . Allied pilots initially believed Ki-61s were Messerschmidt Bf 109s and later an Italian aircraft, which led to the Allied reporting name of "Tony", assigned by the United States War Department. It was the only mass-produced Japanese fighter of the war to use a liquid-cooled inline V engine. Over 3,000 Ki-61s were produced. Initial prototypes saw action over Yokohama during the Doolittle Raid on 18 April 1942, and continued to fly combat missions throughout the war.

FSX CamSim Bombardier CSeries 100 V5L. This model is design for AI traffic only, base from my CSeries 100 ags V5L but without AGS and static displays. Model design and paint by Camil Valiquette.

FS2004 Bombardier CSeries 100 V5L. This model is design for AI traffic only, base from my CSeries 100 ags V5L but without AGS and static displays. No VC. Model design and paint by Camil Valiquette.

FSX Native/P3D 3 & 4 Boeing 717-200 Blue 1 package. Blue 1 was a Finnish airlines and operated 5 Boeing 717-200 aircraft. Blue 1 was merged into Cityjet in 2016 The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model blended with Ken Wiggington's work on the default 737 VC to make it more resemble a 787. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. FMC by Garret Smith. Textures by Eric cantu. Model is not modified in any way. VC added and textures. Fixed wheel sink. See VC docs to get the best out of the FMC. Assembled and prepared and tested for P3D V3 & 4 /FSX by Chris Evans.

McCoy Helicopter Landing Effect v4 for both FSX & P3D v4. This package replaces the default rotor-wash effect for dirt and water, five sets of various sizes are included and can be used in any combination. These effects are individually assigned to a specific helicopter overriding both FSX & P3D's default effects. These effects will not detach and lift off the surface when the aircraft climes above a specific height. Some improvements over v3.4b include the removal of two emitters for better frame rates, adjustments that remove the wind effect appearing in waves, a simplified installation and all emitters have had their scale, velocity, density, offsets and colors adjusted for a more realistic appearance by Vince McCoy, 04/04/2017.

The Mitsubishi G4M (long designation: Mitsubishi Navy Type 1 attack bomber: was the main twin-engine, land-based bomber used by the Imperial Japanese Navy Air Service in World War II. The Allies gave the G4M the reporting name Betty. Japanese Navy pilots called it Hamaki "cigar", lit. "leaf roll") due to its cylindrical shape. The G4M had very good performance, especially range, which was achieved by its structural lightness and an almost total lack of protection for its crew, with no armor plating or self-sealing fuel tanks. These omissions proved to be its weakness when confronted with American fighter aircraft during the Pacific War.

The Douglas C-54 Skymaster was a four-engined transport aircraft used by the United States Army Air Forces in World War II and the Korean War. Like the Douglas C-47 Skytrain, the C-54 Skymaster was derived from a civilian airliner, the Douglas DC-4. Besides transport of cargo, the C-54 also carried presidents, prime ministers, and military staff. Dozens of variants of the C-54 were employed in a wide variety of non-combat roles such as air-sea rescue, scientific and military research, and missile tracking and recovery. During the Berlin Airlift it hauled coal and food supplies to West Berlin. After the Korean War it continued to be used for military and civilian uses by more than 30 countries. This was one of the first aircraft to carry the President of the United States.

FSX Native/P3D 3 & 4 Boeing 717-200 Hawaiian Pacific package. This is the native SGA Boeing 717 (MD95) converted to FSX Native by Eagle Rotorcraft Simulations from the Eric Cantu/SGA original. As of August 2017 Hawaiian Airlines operate 20 Boeing 717-200 aircraft. The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model blended with Ken Wiggington's work on the default 737 VC to make it more resemble a 787. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. FMC by Garret Smith. Model is not modified in any way. VC added and textures. Fixed wheel sink. See VC docs to get the best out of the FMC. Assembled and prepared and tested for P3D V3 & 4 /FSX by Chris Evans.

The Coronado was the only 4 engine patrol bomber in US navy service at the outbreak of WW2. I t served very well with it's 5000 mile patrol range. Over 200 were produced and it served into 1942 when it was gradually replaced with the Martin Mariner. This is an FSX panel update for the FS2004 Consolidated PB2Y Coronado Flying Boat by the late Paul Clawson. It features both an entirely new VC and 2D panel. The contact points have been corrected and smoke is included now as well. Thanks to Paul Clawson for the original model. All FSX updates by Michael Pook.

New York City X DEMO features a detailed scenery of New York city in the United States of America, fully compatible with FSX, FSX STEAM, P3D v1/v2/v3/v4 and FSW by Dovetail. A demo version of New York City X is provided. This is a fully functional freeware scenery, perfectly aligned with the full payware version. This ensures no problems with online (VATSIM, IVAO and multiplayer) flying in case some users have the payware scenery and some don't. The demo gives you the most important (largest) downtown buildings with a low quality photoreal ground for Manhattan area, as well as low quality heliports. This scenery add-on features 2500 sq km of terrain with autogen and over 6100 photoreal New York buildings in the city, which is the most populous in the United States and the center of the New York Metropolitan Area, one of the most populous urban agglomerations in the world. The product is equipped with an automatic installer, which means that the scenery will be automatically added to the Flight Simulator Scenery Library. Please uninstall all previous versions of similar sceneries you may have installed before. Please make also sure that no duplicated AFCAD files are installed. Enjoy your virtual flying with Drzewiecki Design!