Textures only for the payware Dino Cattaneo FSX/P3D Eurofighter Typhoon in 11 (F) Squadron, Royal Air Force livery. Aircraft portrayed is ZJ919, based at RAF Coningsby, Lincolnshire, circa 2011.

Textures only for the TDS Boeing 727-200 for FSX in Hughes Airwest livery. Hughes Airwest was owned by Howard Hughes and was based in San Fransisco. It operated from 1970 to 1980, when it was acquired by Republic Airlines. You need the Boeing 727-200 by TDS. This aircraft was tested on FSX-SE & P3D v3.

FSX/P3D Boeing 737-Max 8 Norwegian Air Shuttle Package with enhanced VC. Norwegian is a low cost carrier based in Norway and currently (April 2017) have 108 Boeing 737 Max8 on order. Deliveries are expected to start in mid 2017. FSX 737-Max8 native model by TDS with advanced 737-800 VC added. The wonderful Boeing 737-Max8 from TDS will be enjoyed by many more people who do not know how to install a VC into a FSX native model. Added the fantastic internal model/VC from Alejandro Rojas Lucena/FSND. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. There are custom Boeing sounds included for that extra realism. Use - Instrument panel - Util for ground vehicles, doors stairs, fuel truck, buses. New Utility allows Bus, fuel, doors and more. (Go to Views - Instrument panel - Utility) Model is not modified in any way. VC added and aircraft.cfg edited to allow correct VC views. Also fixed nose gear height so it no longer sinks into the ground. Edited and assembled for the many who cannot do this themselves. Credits go to TDS wonderful native FSX Boeing Max8 model. Added the photoreal textures by Stian Svensen. See VC docs to get the best out of the VC and FMC. Assembled and prepared for FSX/P3D by Chris Evans.

Boeing 737 Max8 Norwegian Air Shuttle. Currently (April 2017) Norwegian have 108 Boeing 737 Max8 on order. Model by TDS. Textures by Stian Svensen.

This was the second design for the He P.1079B all-weather heavy fighter. The wings were swept back sharply and contained six fuel tanks. A crew of two sat back-to-back in the cockpit, and armament was to be four MK 108 30mm cannon. No evidence has been found that the P.1079 projects were ever submitted to the RLM, but it is known that designer Siegfried Günter, along with his engineers Eichner and Hohbach, were working on these designs under U.S. supervision during the summer of 1945. This is an FSX update for the He-1079, originally designed for FS2002 by Stephen Robinson and updated for FSX by Keith Hackett in 2010. This new update features a new gauge configuration for the VC and a 2D panel has been added as well, both with now all German authentic gauges. Furthermore, smoke, burner effect and new camera views have been added also. The new livery (green camo) has been made by myself. Thanks to Steve Robinson for the original model, to Keith Hackett for the earliar FSX update, to Hauke Keitel for most of the gauges and to Mark Cranston for the sound. New 2D panel and gauge configuration, new livery and smoke and burner effect as well as additional camera views by Michael Pook.

This project was Henschel's design for a fast bomber to be powered by a single 2200 horsepower Daimler Benz DB 610 engine. A "Entenbauform" (built like a duck) design was used, with the tail in front and the wing to the rear. Vertical fins were located at the wingtips. The cockpit was in the forward fuselage with accomodations for a crew of three or four. The prototype construction was not begun, and the further development of tail-first aircraft was not pursued due to lengthy development time and design cost. This is an FSX update for the HSP-87, originally designed for FS2004 by Stephen Robinson. The aircraft works perfectly in FSX, but this update features a new 2D panel, smoke effect and additional camera views. Thanks to Steve Robinson for the awesome original model. New 2D panel, smoke configuration and additional camera views by Michael Pook.

The Focke-Wulf Ta-283 was a German swept-wing ramjet-powered interceptor aircraft during World War II. The project was developed at the same time as the Focke-Wulf Super Lorin and remained unbuilt before the surrender of Nazi Germany. This is an FSX update for the TA-283, originally designed for FS2002 by Stephen Robinson. Amazingly, the aircraft works perfectly in FSX, but this update features both a revised VC and 2D panel with all German authentic gauges as well as corrected smoke, new burner effect and additional camera views. Thanks to Steve Robinson for the awesome original model, to Hauke Keitel for the Kedi gauges,to the unknown designers of the other great gauges and to Erwin Welker for the camera views. New panel and effect configuration by Michael Pook.

FSX/P3D McDonnell Douglas DC-10-30 Martinair package. Dutch carrier, Martinair, operated 5 DC-10-30 aircraft between 1987 and 1995. Most of these were cargo versions. Model and VC by Thomas Ruth. Includes comprehensive VC with working wipers. I included the great textures by Mike Pearson. Added FMC by Garret Smith. Custom packaged and tested in FSX and P3d v 3.4 by Chris Evans

This fictional supersonic airliner was designed by Christian Drawz and improved by Michael Pook. VC, new panels for wide and standard screen, new gauges including GPWS callout by Philippe Wallaert. See instructions in the readme.txt file.

This is a repaint of the Jens B. Kristensen DC-4 1009 in Air Katanga livery. Air Katanga was a short lived classic airline based in the Congo in the early 1960s. It operated from 1960 to 1963. You need the freeware DC-4 v3.01 for FS2004 by Jens B. Kristensen. Textures are 32bit. (Some FS2004 users could not utilize this repaint on their flight simulator. I have fixed the error and it should work now. Replace the other file with this one.)