Airplane Flying Handbook 2016 (FAA-H-8083-3) The Airplane Flying Handbook provides basic knowledge that is essential for pilots. This handbook introduces basic pilot skills and knowledge that are essential for piloting airplanes. It provides information on transition to other airplanes and the operation of various airplane systems. It is developed by the Flight Standards Service, Airman Testing Standards Branch, in cooperation with various aviation educators and industry. This handbook is developed to assist student pilots learning to fly airplanes. It is also beneficial to pilots who wish to improve their flying proficiency and aeronautical knowledge, those pilots preparing for additional certificates or ratings, and flight instructors engaged in the instruction of both student certificated pilots. It introduces the future pilot to the realm of flight and provides information and guidance in the performance of procedures and maneuvers required for pilot certification. Topics such as navigation and communication, meteorology, use of flight information publications, regulations, and aeronautical decision making are available in other Federal Aviation Administration (FAA) publications. I know you can obtain it directly via https://www.faa.gov/regulations_policies So, that's up to you. However I value it as a most useful pdf file. In case you weren't aware yet.

Aeronautical Chart Users’ Guide 2023 This Chart Users’ Guide is an introduction to the Federal Aviation Administration's (FAA) aeronautical charts and publications. It is useful to new pilots as a learning aid, and to experienced pilots as a quick reference guide. I know you can obtain it directly via https://www.faa.gov/regulations_policies So, that's up to you. However a most useful pdf file in case you weren't aware yet.

This is the scenery of Buenos Aires Aeroparque Jorge Newbery. There is no jetway either SODE or default here. But you are welcome to edit it and add jetway if you want to. Tested only in P3D V4/V5, but will likely not work in Earlier P3D and will never work in FSX.

"KulusukX" scenery package is the most real mesh for Fligh Simulator X for Kulusuk area in Greenland. This area covers more than 8,822 Sq. miles." "The mesh data is made from ASTER GDEM data. While ASTER GDEM data is not nearly refined as STRM source data, the data is the best data for Greenland. “The raw ASTER GDEM data is not without its problems, but I have remaked large areas to make it usefull. But it's not only the mesh I have reworked. The coastline and islands are reworked for this release. Tasiilaq Helistop (BGAM) and the terminal is also added to the scenery. Kuummiut Helistop (BGKM), Sermiligaaq Helistop (BGSG) and Timmiatmiut Helistop (BGTN) is added with helistops, adn some standard FSX buildings. This release have redefined land class for the area. This gives you a more realistic land class. By Abdul Hamid

FSX (Accelleration) Package Frigate USS Philadelphia from the late 18th century with two AI-vessels. This american sailing ship is famous from the Barbary Wars in the Mediterranean Sea. After doing a regular blockade duty she chased in October 1803 an Libyan privateer but ran aground on an uncharted reef close to Tripoli harbor. The whole crew became war prisoners. The partly demaged Philadelphia later was towed by the Tripolitans to the harbor to enforce the City of Tripoli with its additional guns. In February 1804 a special task group entered the harbor during night on a small vessel, named USS Intrepid and burned down its own frigate to prepar the harbor to be defeated in a later time. The Sim-model is almost complete rigged with hundreds of ropes and has fourteen animated guns, six animated stunsails and six unimated crewmen. Twentyfour cameras let you explore the whole ship: The deck, the lower gun deck and you can enjoy the sailors views from high above in the masts. The effects allows you to fire broadsides to starboard and port seperatly. The big american frigate USS Constitution and the british frigate HMS Surprise are included in this package as ai-ships. The models should run in FS2004 and probably also in P3dV3 but it is not tested. FSDS 3.5 model made by Erwin Welker

These modifications are for and of the Piper PA-44 Seminole aircraft created by Rien Cornelissen. They consist of modified gauges, added Cockpit sounds, added VC cameras, added documentation and kneeboard files, slightly changed light configuration, enhanced Bendix King Auto Pilot, TCAS, GPWS, and some new and some revised gauges as well. A new sound set has been added because of issues with the original aliased sounds in P3Dv4. Finally one newly created livery has been added. Now this pack has 4 different liveries. All has been tested okay in Prepar3D v4+.and in FSX as well. Note that this is the complete aircraft. See for full information and credits file 'Piper Seminole RC mod.pdf' in the 'Docs' folder of the aircraft. Happy flights.

This addon was specifically created to be attached to the Milviz UH-1H using Lorby's FirefighterX Client. Without this client, the tank cannot be attached to the helicopter. The Simplex Aerospace 360 gallon water tank was installed on many versions of the Bell 205/UH-1 Huey in aerial firefighting. The version represented here, is the one seen on Cal Fire UH-1 Super Hueys. By Nicholas Mitchell.

The HTSU or Heli-Tender Support Vehicle is deployed with one of Cal Fire's rotary wing assets to provide field support to Cal Fire's helicopters without the need for the aircraft to return to an airfield to refuel, or resupply. Cal Fire currently operates one HTSU alongside each of either it's soon to be retired UH-1 Super Hueys or the S-70I Firehawks. As of 2023, there are currently 16 active rotary assets flying with Cal Fire. This addon requires Lorby's FireFighterX Client to place any of the 16 HTSUs. Each HTSU is uniquely marked for it's aircraft/base assignment. A single generic static scenery version has also been included for scenery builders to use if they so wish. By Nicholas Mitchell.

FSX/P3D Boeing 737-800 TAROM package. Romania's flag carrier airline is based at Bucharest Henri Coanda International Airport and currently has 4 Boeing 737-800 flying to destinations worldwide. I am revising my old repaints to improve textures and fix errors. Credit goes to TDS for the great model and paint kit. Package includes revised Boeing 737-800 VC by Alejandro Rojas Lucena/FSND/Ken Wiggington upgraded Boeing 737-800 VC model. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS). Includes added MFD and PFD panels. Exits, wheel levels, jetways and views corrected for FSX/P3d. See VC docs to get the best out of the VC and FMC. Textured and texted in P3D 5.3 by Chris Evans. Should also work in earlier P3D versions as well as FSX.

FSX/Steam/P3D3 Cessna 310Q Olympic Livery. This is a fictional livery of a Cessna 310 Q of Olympic Aviation. The reason for the livery is that I made a handcrafted 310 Q out of balsa wood & silkspan RC Model in 1977 that I still own in this same livery colors( I included photos of the RC Model in the package). You will need the original freeware Rob Richardson Cessna 310Q(Link Listed Bellow). Full VC and Continental T10 Sounds by Gary Jones. For the Microsoft Flight Simulator X SE. Happy Landings everyone. Repaint by Hellenic Aircraft/Yiannis Katehis Tsetsas 2023.