FSX/P3D Boeing 747-400F Sky Gates Cargo package. SkyGates is a Russian cargo airline based at Moscow Zhukovsky International Airport. As of April 2020, Sky Gates operate 2 Boeing 747-400F. Project Opensky Boeing 747-400f FSX native model with the much improved Boeing 747 internal model (VC) from Alejandro Rojas Lucenda (Manual included). Model includes ground cargo servicing, stairs (FSX - Go to Views - Instrument Panel -Posky Utility. P3D go to Vehicle - Instrument Panel -). Added 747 sounds, edited views, panel. Thank you to Project Opensky/Skyspirit/TDS for their huge contribution to the worldwide community of flight simulation. Also includes the Boeing 747 VC textures upgrade. This give a much clearer 747 interior virtual cockpit look. Zip preview for larger pictures. Added wing views. Added the high quality textures by Sky sim Graphics. Assembled and tested in P3D v4.5 by Chris Evans. Should also work in FSX and previous P3D versions. Zip preview for images.

FS2004 Sky Gates Airlines package. Project Opensky 747-400/F V4. Model Features include fully animated control surfaces, fully independent suspension, main gear steering, trim animation, opening passenger doors, opening cargo doors, dynamic flexing wings, animated tilting bogies, rolling wheels, animated thrust reversers, fully reflective textures ( each part has different degree of reflection based on material ), accurate flight dynamics ( accurate FDE with full profiles for wheels, tires, struts, leading/trailing struts, engine types ... Tested by real pilots.), newly re-defined individual part damage profiles, accurate spoiler animation, detailed textures, full night lighting, visible landing lights from the cockpit, reflective cockpit windows, crash effects, transparent nav light lenses, newly re-defined individual part damage profiles. Model Designer Hiroshi Igami. Flight Dynamics Designer Warren C. Daniel.Master textures by Corey Ford/Yosuke Ube. Also incluided for FS2004,updated lightmap for POSKY 747-400 by Adam Hamada,Painted by Skysim Graphics Team (SGT) Pedro Rodriguez and livery tester by Salman Shaikh

This is the Sao Carlos airport, in the state of Sao Paulo, Brazil. It is also the LATAM Technology Center. For more sceneries check the blog in the README file.

Welcome to the Lewiston-Nez Perce County Airport in northern Idaho [KLWS] for FSX! I have added the new tie-down area, taxiways (Z,Z1, and Z2), and the new Airport Operations Facility located south of runway 08/26. All the structures are custom. Airport vehicles use the proper vehicle paths and do not use taxiways. I have included a Traffic bgl that will add a number of AI flights into and out of Lewiston to other nearby destinations. If you don't want that feature just delete the KLWS Traffic.bgl file in the scenery folder. As with all my work the structures are original work. Three scenery complexity levels are used (normal,dense, and very dense). More eye candy appears with each increase.

X-Plane 10.50+ Aerospatiale Gazelle 1.5. The Aerospatiale Gazelle is a French five-seat helicopter, commonly used for light transport, scouting and light attack duties. It is over 50 years since the maiden flight of the Aerospatiale Gazelle and there are still quite a few of these still flying. Here is an SA342L version for X-Plane 10. It is the military companion of the SA342J, which was fitted with the more powerful 649 kW (870 shp) Astazou XIV engine an improved Fenestron tail rotor. With an increased take-off weight, this variant was approved on 24 April 1976, and entered service in 1977. By John Bray

FSX/P3D Airbus A340-600 South African Airways Star Alliance package. South Africa's flag carrier airline is based at O. R. Tambo International Airport, Johannesburg and currently has 4 A340-600 in it's fleet, flying worldwide. Model by Thomas Ruth. Added the better Thomas Ruth modified VC with latest updates by Chris Evans and Louis Quintero. Added correct jetway configs, wing views and wheel levels. Manual included. Zip preview for larger pictures. Checklist by Werner Schott included. Textured and assembled for P3D v4.5 by Chris Evans. Should work in FSX and earlier P3D versions.

This is a high definition repaint pack for the FSN wheeled version of the AT-802. The AT-802 SEAT or Single Engine Air Tankers have been used widely across the world. Mainly in North America and Australia. The AT-802 is capable of operating on dirt strips and remote refill locations due to it's small size and ability to work from rough strips. This capability is widely used in Australia. The AT-802 is used widely in the US as a contracted initial attack aircraft for the USFS. But it is largly overshadowed by the large contracted air tankers the USFS uses. It's 2 competitors in North America are mainly the the Bombardier/Viking CL-415/215T Super Scooper and the Grumman/Marsh S-2F3AT Turbo Tracker flown by Cal Fire. The S-2 and CL-415s both carry more than 1,000 gallons. Making the AT-802's 800 gallon capacity the smallest of the category. It is also slower than it's twin engine competitors. Still a viable platform, used in pairs in tandem to add to the effectiveness of drops similar to the use of the CL-415, the 802s can also be used as lead / air attack platforms. More powerful versions of the AT-802 variants are currently being flight tested. The new derivative, the AT-1002 is larger and more powerful 802 was first flight tested in late 2013. It is still in development, but will be capable of carrying 1,000 gallons of retardant/water and carry nearly twice the fuel of the 802s currently. Making the 1002 closer in performance to the other aircraft in it's category. This repaint pack represents 8 liveries for several operators in the United States, Canada, and Australia. Repaints by Nicholas Mitchell.

FSX Default DG-808S Glider flaps & speeds settings fix. The 3D cockpit does not show the flap settings correctly. The 2D does. I hope this helps!

Polish Air Force textures for the payware Iris F15 Eagle. By Voiteh.

The Updated Magnetic Variation data package provides an updated set of Magdec.bgl files (2020) for FS9, FSX and P3D. New values have been calculated according to the exact WMM2020 mathematical model at epox 1/1/2020. Replacing the default magdec.bgl file with the one provided will result in a better fit between displayed headings and current data. Install instructions are included. by Herve Sors