Oct 06, 2024 |
All Files > Page 4814
 
 
 
FS2000
                                    - Collins GPWS Mark II
FS2000 - Collins GPWS Mark II (Category: FS Gauges > FS Gauges)
0.32Mb (664 downloads)
FS2000 - Collins GPWS Mark II A fully-featured GPWS system with Modes 1, 2, 3, 4A, 4B, 5 and 6 supported. Requires either the Collins YG-7500 radar altimeter (included) or the Collins ADI-84A (dfdca2k.zip). Mode 2 ("terrain terrain") programmed by Arne Bartels. Dai Griffiths, Dragonflight Design. 328K
Posted Jun 23, 2008 14:18 by archive
 
FS2000
                                    - Collins ADI-84A
FS2000 - Collins ADI-84A (Category: FS Gauges > FS Gauges)
0.11Mb (1349 downloads)
FS2000 - Collins ADI-84A The ADI-84A is a multi-purpose attitude direction indicator incorporating a radar altimeter, V-bars for direction guidance, a glideslope indicator, decision height light and a localiser deviation pointer plus slip/skid indicator and pitch and bank.Reacts to the default avionics and lighting buses. Dai Griffiths, Dragonflight Design. 111K
Posted Jun 23, 2008 14:18 by archive
 
FS2002 Alternate GPS gauge (Category: FS Gauges > FS Gauges)
0.11Mb (657 downloads)
FS2002 Alternate GPS gauge. A modification of the default GPS. About all it does is to put the control buttons at the bottom. It also has different night lighting characteristics. By Chuck Dome. 118K
Posted Jun 23, 2008 14:18 by archive
 
Garmin GI102A and GI106A Navaids (Category: FS Gauges > FS Gauges)
0.19Mb (559 downloads)
Garmin GI102A and GI106A Navaids Two versions - with bezels and without bezels for mounting either in front of or behind the panel. Replacement gauges for the default Bendix-King VOR1 and VOR2 receivers. These gauges respond to the default avionics and lighting buses. Garmin are better known for GPS systems but they also used to produce "standard" avionics. Dai Griffiths, Dragonflight Design. 198K
Posted Jun 23, 2008 14:18 by archive
 
FS2000
                                    PFD Glass Gauge
FS2000 PFD Glass Gauge (Category: FS Gauges > FS Gauges)
0.18Mb (1219 downloads)
FS2000 PFD Glass Gauge PFD Glass Gauge without frames for use with any FS2000 panel. Same style and size as the EHSI Glass Gauge in fsnhsi11.zip. For panel designers, no documentation included. By Peter Beddig. 184K
Posted Jun 23, 2008 14:18 by archive
 
bf109e (Category: FS Gauges > FS Gauges)
(33 downloads)
CFS2 Stock Gauges: Required for several Vintage Panels. bf109e 712K fw190a 285K hurricane 274K p47d 244K p51d 212K spitfire 309K
Posted Jun 23, 2008 14:18 by archive
 
FS2004
                                    Douglas DC-3 Three Fuel Tank Automixture Gauge
FS2004 Douglas DC-3 Three Fuel Tank Automixture Gauge (Category: FS Gauges > FS Gauges)
0.48Mb (838 downloads)
FS2004 Douglas DC-3 Three Fuel Tank Automixture Gauge For three-tank operation, this gauge may be of interest to those pilots who like to fly without checking the "Enable automixture" function in the "Aircraft/Realism Settings" pull-down menu, but want more DC-3 realism than can be achieved with FS2004's simulation of mixture control. It requires prior installation of Beaumont and Bitzer's Douglas DC-3 Three Fuel Tank Modification, to be found in DC3_3TK.ZIP. Its purpose is to replicate the auto-rich and auto-lean settings on the mixture controls, including a fully functional mixture control. Its calibrated range of operation is from 3000 to 12000ft. density altitude. In the auto-rich position, it approximates the checked "Enable automixture" setting on the "Aircraft/Realism Settings" menu. In the auto-lean position, the mixture is leaned to increase the exhaust gas temperature about 30 degrees K. from auto-rich, and will increase achieved miles per gallon. By Dave Bitzer and Mark Beaumont. File name: DCA_3MX.ZIP. 491K
Posted Jun 23, 2008 14:18 by archive
 
FS2004
                                    Douglas DC-3 Four Fuel Tank Automixture Gauge
FS2004 Douglas DC-3 Four Fuel Tank Automixture Gauge (Category: FS Gauges > FS Gauges)
0.49Mb (1012 downloads)
FS2004 Douglas DC-3 Four Fuel Tank Automixture Gauge For four-tank operation, this gauge may be of interest to those pilots who like to fly without checking the "Enable automixture" function in the "Aircraft/Realism Settings" pull-down menu, but want more DC-3 realism than can be achieved with FS2004's simulation of mixture control. It requires prior installation of Beaumont and Bitzer's Douglas DC-3 Four Fuel Tank Conversion Kit, to be found in DC3_4TK.ZIP. Its purpose is to replicate the auto-rich and auto-lean settings on the mixture controls, including a fully functional mixture control. Its calibrated range of operation is from 3000 to 12000ft. density altitude. In the auto-rich position, it approximates the checked "Enable automixture" setting on the "Aircraft/Realism Settings" menu. In the auto-lean position, the mixture is leaned to increase the exhaust gas temperature about 30 degrees K. from auto-rich, and will increase achieved miles per gallon. By Dave Bitzer and Mark Beaumont. File name: DCA_4MX.ZIP. 502K
Posted Jun 23, 2008 14:18 by archive
 
FSTSTuner
                                    - Gauge for FS2002/FS2004
FSTSTuner - Gauge for FS2002/FS2004 (Category: FS Gauges > FS Gauges)
0.64Mb (1683 downloads)
FSTSTuner - Gauge for FS2002/FS2004 that allows you to switch Channels on the radio stack and it tunes TeamSpeak to the correct IP and channel - written by FlapsOut. 1.5MB
Posted Jun 23, 2008 14:18 by archive
 
FS2002/2004
                                    B737 Reverser unlockers
FS2002/2004 B737 Reverser unlockers (Category: FS Gauges > FS Gauges)
0.07Mb (3165 downloads)
FS2002/2004 B737 Reverser unlockers. Again MS forgot to light-up the Reverser Unlockers of the B737-400 panel. The gauges are there, but don't do anything. Here is an old gauge from FPDA which can be used for FS2002 and FS2004. With a description for those who have problems to locate the panel.cfg file in FS2002 or FS2004. By: Peter Mess. 67K
Posted Jun 23, 2008 14:18 by archive