FSX / P3D up to v3. The Nakajima Ki-84 Hayate is a one-seat fighter flown by the Imperial Japanese Army Air Service in the last two years of World War II. The allied report name was Frank, the designation of the Japanese army was Type 4 Combatant. The Ki-84 is generally considered the best Japanese fighter to operate in large numbers during the conflict. The plane had high speeds and excellent maneuverability with an armament that gave it a formidable firepower. The performance of the Ki-84 coincided with that of any single-engine allied fighter it faced, and its operational ceiling allowed it to intercept the B-29 Superfortress bombers. This is a revision, adaptation and repack of multiple skins, propeller revision, gauges, flight characteristics and others, for its operation is FSX and P3D up to P3Dv3 of the Akemi Mizoguchi model. To all the merits for this excellent model. Enjoyment....

FSX/P3D (up to 3) Kawasaki Ki-100 Tony. This is a combat aircraft used by the Japanese Imperial Army Air Service in World War II. The designation of the Japanese army was Combatiente of type 5 (Go- shiki sentouki or abbreviated like Goshikisen). No new code name was allied to this type. 275 fuselages were built as Ki-61 before being modified to accept a Mitsubishi Ha-112-II radial engine instead of the original Kawasaki Ha-40 in-line engine. This is a revision and adaptation of the YKrystof Malinowski CFS2 model now running on P3D up to P3D v3. VC drivers running, propellers, and other details to enjoy ..... All merits to its creators.

FSX/P3D3 Kawasaki Ki-61 Hien (Swallow) was a Japanese fighter aircraft used by the Imperial Army Air Force. The code name for the allies assigned by the United States War Department was Tony. The designation of the Japanese army was Type 3 Chase. It was the only Japanese mass-produced war fighter that used a liquid-cooled V engine. This is a revision and adaptation of the Yakemi Mizoguchi model CFS2 now running in P3D up to P3D v3. VC gauges running, propellers, and other details. Multiple skins, to enjoy ..... All merits to its creators.

FSX/P3D3 Aichi B7A Ryusei (allied name of Grace) This was a great and powerful carrier torpedo - dive bomber produced by Aichi Kokuki KK for the Imperial Japanese Navy Air Service during the Second World War. Built in few numbers and deprived of the aircraft carriers from which it was destined to operate, the type had little chance of distinguishing itself in combat before the war ended in August 1945. This is a revision and adaptation of the Yashico model, Aichi B7A2 Grace for CFS2 now running on P3D until P3D v3. VC gauges running, props, and other details to enjoy ..... All merits to its creators.

FSX/P3D McDonnell Douglas DC-10-30 Multi Livery package 3. Liveries: Laker Airways, United 1980's, Northwest (NWA) Final livery early 2000's, Varig Log, Monarch. Original McDonnell Douglas DC-10-30 model for FS2004 by Eric Cantu/Vistaliners, converted to FSX native by Eagle Rotorcraft Design. VC by Thomas Ruth. Included Honeywell FMC by Garrett Smith. Fixed wheel sink. Added sound pack. Added DC-10 checklist. I included the textures by Frank Idone, Joe Archer, Darrell Hyde. Assembled and tested in P3Dv4.2 by Chris Evans Should also be fine in FSX and earlier P3D versions.

TDS Boeing 737-700 FAC Fuerza Aerea Columbiana Presidential/government aircraft. Model by TDS. VC by Alejandro Rojas Lucenda. Full aircraft for FSX and P3D

FSX/P3D McDonnell Douglas DC-10-30 Multi Livery package 2. Liveries: Western Airlines, Swiss, Delta Early, Pan Am, World Airways. Original McDonnell Douglas DC-10-30 model for FS2004 by Eric Cantu/Vistaliners, converted to FSX native by Eagle Rotorcraft Design. VC by Thomas Ruth. Included Honeywell FMC by Garrett Smith. Fixed wheel sink. Added sound pack. Added DC-10 checklist. I included the great textures by Frank Idone, Derek Anderson, Johannes Aufgebauer, Daniel Halpern. Assembled and tested in P3Dv4.2 by Chris Evans Should also be fine in FSX and earlier P3D versions.

Take off in a Lear Jet initially, from Friedman Meml airport in Hailey, Idaho to Sawtooth Mountain. Then to Weiser Mun airport in a Beech Baron. Change to the Bell Jet Ranger helicopter and fly the governor to HER state capital building.

FSX/P3D Boeing 747-400F KLM Cargo Package. Founded 100 years ago in 1919, Royal Dutch Airlines, KLM are based at Amsterdam Schiphol Airport and as of February 2019, operate 3 Boeing 747-400F cargo flying to destinations worldwide.. Project Opensky Boeing 747-400 FSX native model with the much improved Boeing 747 internal model (VC) from Alejandro Rojas Lucenda (Manual included). Model includes ground cargo servicing, stairs (FSX - Go to Views - Instrument Panel -Posky Utility. P3D go to Vehicle - Instrument Panel -). Included CF engine sounds from BrandonG, with realistic jet whine to make your flight sound great. Thank you to Project Opensky for their contributions to the worldwide community of flight simulation. I have added the realistic textures by Mees Jansen. Also added better ground cargo textures. Checklist included. Also includes the Boeing 747 VC textures upgrade. This give a much clearer 747 interior virtual cockpit look. Zip preview for larger pictures. Added wing views. Tested in P3D v4.2 and should be ok in FSX and previous P3D versions. Zip preview for images. Custom packaged by Chris Evans

Messerschmitt Bf109G-6/AS by Design Team Daedalus Unit: 6./JG27 Fels am Wagram, July 1944 Pilot: Uffz. Heinz Zimmermann This aircraft was shot down on Aug.23, 1944. Uffz Zimmermann KIA The first G-6/AS aircraft reached frontline units in early April, 1944 - III/JG, I/JG5 and II/JG11. I/JG3 received them in May and II/JG/27 got theirs in June, along with a few going to NJGr/10. There is no "standard" Bf 109G-6/AS, as the production included conversions of basic G-6 models and different radio equipment, oil cooler types, antenna masts, etc. were available at different times during the production runs. So each model we have created has its own unique features. Pstrany developed the models using Paul Rebuffat's Messerschmitt model - with permission - as a starting framework and updated the shape, and added a plethora of details, new parts, and ideas. Pstrany also developed the models for the drop tanks, weapons and racks. Captain Kurt created paints for each, the 2D instrument panel, the air files and the aircraft.cfg files. Mav SCASM edited each model so that they have animated wing slats, drop tanks, and other features, as well as optimizing models for the best possible frame rates. We have all benefited from the assistance and guidance of others in the community. Special thanks to Wolfi and Huub Vink for their kind assistance and to all who have contributed their knowledge directly and indirectly.