The Piper Meridian M600 is a sleek single turboprop that can cruise up to 30,000 ft. and speeds up to 250 ktis. Just unzip file into a temp folder and copy the folder named MK_Piper_Meridian into your default Aircraft\Extra Aircraft folder and you should be set.

Watched the Tour de France 2017. Stage 18 looked sort of interesting as a possible mission, so that is what I've made. In the actual tour, there are bikes, motorcycles, cars and helicopters used along the route. A map of stage 18 has been provided. I set out points of interest about 10-15 miles apart. The route is in the Alps and is 179.5km (111.5 miles, or about 100nm) long. The final destination is essentially at a mountain top. Take off in an AirCreation Trike Ultralight from Briancon, to St. Crepin airport to Embrun to Le Sauze du Lac to the airport at Barcelonette to Guillostre and land at the high region of Col d' Izoard. Should you prefer to use a helicopter, feel free to change the trike, say, in the FLT file. In any case, Touch & Goes at each point of interest and land at Col d'Izoard. I added crowds at the points of interest. That has required the use of FSX Acceleration or Gold.

The Boeing 767 is a twin-engine aircraft of the U.S. aircraft manufacturer Boeing . The economically very successful low-wing monoplane was the first long-haul Boeing aircraft with only two engines and is produced today. The Boeing 767 has until today more transatlantic flights performed than any other passenger airplane. The development of the Boeing 767 as a widebody aircraft began on 6 July 1979 and was intended as a replacement for the Boeing 707. The first flight took place on 26 Of September 1981. Without virtual cockpit. Free for private use. By Andreas Meyer - www.afs-design.de

V1.5. The Vietnam-Desert Storm era of aircraft carriers is really lacking in the world of FSX/P3D. I have been working, using Google Sketchup, to fill this gap. This is the latest project fresh out of the Dry dock. The USS America (CV-66) is the 3rd of the Kitty Hawk class. It is a HEAVILY modified 3DWarehouse model originally by A.W. (https://3dwarehouse.sketchup.com/model.html?id=8aacd0f973114c1b53d9199581d0f4b4) I have tried many times over the last 2 years to find out how to contact the author, to no avail. I am using it under free use, and I will not be charging money for it. I also got permission to use the static planes from Gary (Author of the Midway CV-41 and the Oriskany.) with my previous uploads.

The Messerschmitt development department received a directive in 1942 to begin work on a Zerstörer (destroyer, or heavy fighter). An earlier RLM directive of 1941 had tried to limit the amount of new designs coming from the major aircraft companies (to not disrupt the production lines with new aircraft), so it was decided to couple two Bf 109 fuselages together, along with a new center wing and tailplane section, to come up with the Me 109Z (Zwilling, or twin). A prototype was completed in early 1943, but it was damaged in an Allied air attack on the Messerschmitt test center, and the damage was deemed too severe for repair. The development was abandoned in 1944, and by then, the Me 262 jet fighter had taken wing. This is an update for the Me-109 Zwilling, recently converted for FSX by Eric Hertzberger. Its focus lies upon an improved and more realistic looking VC and interior, but I also added wing and vc lights, improved the FDE and added smoke effect as well as new thumbnails. Gauges are all authentic German in both the VC and 2D panel. This is the whole package for easy installation. Credits go to Daisuke Iga,Kazunari Shinada and Kawauso Hermitage for the original CF2 model and to Eric Hertzberger for his FSX conversion. All new updates by Michael Pook.

P3D V3 & 4/ FSX Boeing 777X (777-9) Turkish Airlines package. Turkish already operate 33 B777-300 and it is quite likely in time that they will order the new Boeing 777-x. The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model blended with Ken Wiggington's work on the default 737 VC to make it more resemble a 787 and possibly the new 777-9X! This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. There are custom Boeing sounds included for that extra realism. The great native FSX Skyspirit model features opening doors & cargo doors, detailed textures, accurate paint, dynamic shine & effects, dynamic flexing wings that respond to turbulence, fully independent suspension, trim animation, gear steering, accurate flight dynamics, spoiler animation, reflective cockpit windows, crash effects, animated tilting bogies, full night lighting, stairs, ground service vehicles when cargo doors open, (FSX - Go to Views - Instrument Panel -Posky Util), detailed virtual cockpit and more. Added custom B777 sounds. To use FMC - Go to Views - Intrument panel - FMC. See FMC docs. Fantastic native FSX model by Skyspirit/Project Opensky. Jetway exits and wheel sink fixed. I have included the fine textures by Ricardo_tv. Zip preview for images. Prepared, tested and assembled for FSX P3D v 3 & 4 by Chris Evans.

The Avia 156 for FSX/ P3D 3&4 - Native v1.0 Pkg incl 1 model, custom panels and era gauges, custom sounds, custom Flight Model, and 1 livery. This flight simulation aircraft is designed by Milton Shupe, panel construction by Milton Shupe and John Smith; gauges by Microsoft, Scott Thomas, Hauke Keitel; textures by Matt Wynn, Oleboy, and Nigel Richards; and Sounds by Nigel Richards This package is for FSX only. Milton Shupe July 19, 2017

HUD Parameters for FSX HUD_Parameters.lua is a Lua script that displays flight parameters in a small text window that pops up when the script is selected by an assigned key or button if the aircraft is in the air. Parameters displayed are: • Indicated Airspeed (IAS. Kts) • True Airspeed (TAS, Kts) • Ground Speed (GS, Kts) • Mach# (when above a user settable altitude, currently 25000ft) • Altitude (ALT, ft) • Radio Altitude (RA, ft) • Vertical Speed (VS, ft/min) • Vertical Speed per Nautical Mile (VS/NM, ft/NM) • Attitude Indicator pitch (AI, degrees) • Flight Path Angle (FPA, degrees) The top of the script contains user settable values for the size and location of the display, the altitude above which the a/c Mach# will be displayed (default is 25000ft), the data update interval in milliseconds (default is 2000), and whether or not data is to be logged in HUD_Parameters.log (default is 0, off). These values can be set using a text editor like NotePad. A registered copy of FSUIPC is required to execute the Lua script. Simply copy the script to the Modules folder of FSX and use FSUIPC4 to assign a key, button or switch to toggle the script on and off. The script turns off if the aircraft is on the ground. Al Klayton

If you ever wanted to have something similar to the Garmin GPS in the cockpits of the A321, 737, 747 or CRJ700 then this addon is for you. What this addon does is add a touch screen gps right in the virtual cockpits of some of the default aircraft in FSX. This is good if you want to be able to view the GPS route in your 3D virtual cockpit without opening the 2D GPS panel and blocking part of your screen. This addon only supports aircraft with a multi function display. Airbus A321 Boeing 737-800 Boeing 747-400 Bombardier CRJ700 It replaces the useless navigation display with a fully working gps!

The Beechcraft AT-11 for FSX Native v1.0 Models by Milton Shupe, panel and gauges by Scott Thomas, textures by the late Damian Radice, and Sounds by Nigel Richards. Four models and ten textures included. Damian's Paint kit is available at SOH and Flightsim.