This upgrade of the Plane-Design MkVII fs9 Just Jane Lancaster at East Kirkby to FSX was made possible by Jeff Lind of Sydney, Australia who had the xml skills and interest to build a working Flight Engineers Panel using all 6 Lancaster wing tanks. The documentation provides an insight into the full use of the Flight Engineers Panel. It is suggested simmers fly this aircraft in the same way as the previously uploaded BBMF Lancasters in Wide View Aspect. After all it is a precious aircraft that is treated with care in the real world so why not the sim? Additional guages and updates to existing Plane-Design gauges by Jeff Lind. Trim gauges by Ted Cook. Lancaster 2015 paint by Koos van Menen of The Netherlands with the original fs9 Plane-Design paint adjusted for FSX by Ross McLennan, Adelaide, South Australia. THIS UPLOAD MAY FUNCTION IN P3D (feedback will be gratefully accepted).

Alderney is the smallest populated island in the cluster of Channel Islands, Again winds, fog and plenty of short runway makes for a very nice challenge. This scenery is perfect for VFR operations as it features the entire island of Alderney recreated in Photo-scenery. Also included are all the usual bells and whistles. This Scenery is perfect when joined with our other Channel Island products

Alcantari International Airport. SLAL Bolivia

Royal Air Force Condover was a former Royal Air Force Flying Training Command airfield and air navigation training establishment between August 1942 and June 1945, unusually for both fighter and bomber crews at different times Condover was used to train fighter pilots by the RAF and the USAAF as well as pilots and air navigators from Australia, South Africa and Canada.

Kirov (formerly Vyatka) is an administrative center at the Transsib railway. It has a population of about 470,000. There is no FSX default airport for Kirov. A callsign file for use with EditVoicepack (precious freeware by Lars Møllebjerg) is included.

Guernsey Airport is located on the island of Guernsey which is on of the few islands that make up the English Channel Islands. With a runway just shy of 1.6 kilometres this airports offers a challenging departure and approach for large aircraft. Also, the island is small and unguarded from winds gusting through the English Channel so this adds to the challenge. This scenery is provided with surrounding Photo-scenery for extra realism. it features High definition ground image and detailing, perfectly placed 3d objects overall a very nice bit of eye candy for your FSX world

Elite Airways is a small passenger carrier based out of Portland ME. They operate CRJs exclusively and have routes up and down the east coast out of small airports.

FSX/P3D Lockheed Tristar L1011-100 RAF (Royal Air Force) Z948 package for FSX. Before being replaced by the A330 MRTT, the RAF operated 9 L1011 with the last flight being in March 2014. Includes VC. Model and VC by Thomas Ruth. Included Honeywell FMC by Garrett Smith. I included the great United textures by UKmil. Custom packaged by Chris Evans

P3D & FSX Fiat G91Y Package. Reconnaissance and ground-attack aircraft produced by Italian company FIAT as an evolution of Fiat G91, with 2 afterburning General Electric J85 turbojets. The first pre-series 'Yankee' flew in July 1968. These aircraft served with 101° Gruppo/8° Stormo (Cervia-S.Giorgio) from 1970, and later, from 1974, they served with the 13° Gruppo/32° Stormo (Brindisi), until the early '90s. Performance : Maximum speed: 1,110 km/h (690 mph - Mach 0.95 at 33,000 ft) - Range: 3,400 km - Service ceiling: 41,000 ft - Rate of climb: 17,000 ft/min Armament : 2 guns × 30 mm (1.18 in) DEFA cannons - Hardpoints: 4 under-wing pylon stations with a capacity of 4,000 lb. This model has been developed in gmax for FSX with SP2 acceleration. Accurate exterior model in clean version and with 2 external tanks, with speedbrakes, accurate gear movements and doors. The VC has been particularly modeled in order to offer the maximum realism, with complete custom 3d gauges set. The model is freeware (see copyright notice enclosed with archive). By Massimo Altieri - Italy - january 2017

(1) Take off in a Bell 206B JetRanger from Reno/Stead airport in Reno, visit some of the sights and fly to a Reno/Tahoe Intl helipad in Reno, Nevada plus a bit more. (2) Take off and go to the Las Vegas, Nevada, USA strip. Transfer to the Batmobile and follow directions after that.