FSX/P3D Boeing 737-800 Hebei Airlines package. Founded in 2010, Hebei Airlines is based at China's Shijiazhuang Zhengding International Airport in the Province. As of October 2019, Hebei has purchased 20 new Boeing 737-800 aircraft flying to destinations around China and is expanding it's routes to Thailand and other countries. Package includes advanced 737-800 VC added. Including utility for ground services, Passenger bus, cargo, stairs, refuelling truck etc (find it under - Views - Instrument panel - Util) The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. Custom Boeing sounds included for that extra realism. VC added and aircraft.cfg edited to allow correct VC views, jetways, wheel levels and wing views. I added PDF B737 checklist, additional G1000 MFD and PFD screens and HGS (HUD). The high quality Boeing 737-800 model and paintkit from TDS. Textured and assembled for P3D4.5 by Chris Evans. Should also work in earlier P3D versions as well as FSX.

This is a repaint of a Fairchild AC-119G Shadow of the 819th Attack Squadron in South Vietnamese Air Force camo colors. Ted Giana's C-119 package is needed for this repaint. Full credit to Daisuke Yamamoto for the model. Technically this is an AC-119G Shadow. Unfortunately, Daisuke Yamamoto did not make that particular model, thus the adaptation of this AC-119G is not completely true to life. Now if you put that aside, it looks good in the SEA camo. One other minor matter, due to the restictions within the model, I couldn't paint the top part of the horizontal stabilizer section in camo, as it would reflect that camo on the underside of the horizontal stabilizer as well. So, I used the black gunship color instead, which looks OK. Textures are 32bit BMP. This repaint was tested on FSX-SE. It should also work on FSX, P3D v1-3.

This is a repaint of the Fairchild C-119G in Royal Norwegian Air Force colors. Ted Giana's C-119 package is needed for this repaint. Full credit to Daisuke Yamamoto for the model. The RNoAF operated 8 C-119-Gs. All of them were ex Belgian Air Force planes. The eight C-119Gs were transferred to the Royal Norwegian Air Force via the US MDAP programme. They were active from 1956 to 1969, when they were eventually replaced by C-130 Hercules transports. Textures are 32bit BMP. This repaint was tested on FSX-SE. It should also work on FSX, P3D v1-3.

This is a repaint of the Fairchild C-119F in Royal Canadian Air Force colors. Ted Giana's C-119 package is needed for this repaint. Full credit to Daisuke Yamamoto for the model. The RCAF received 35 new C-119Fs delivered from 1953, which were later upgraded to C-119G standard. This is a repaint of a C-119F in early RCAF Air Transport Command colors. Textures are 32bit BMP. This repaint was tested on FSX-SE. It should also work on FSX, P3D v1-3.

This is a repaint of the Fairchild C-119G in Morocco Air Force colors. Ted Giana's C-119 package is needed for this repaint. Full credit to Daisuke Yamamoto for the model. The Royal Moroccan Air Force operated 18 C-119s. Twelve were ex USAF aircraft, and the other 6 were ex RCAF ones. Textures are 32bit BMP. This repaint was tested on FSX-SE. It should also work on FSX, P3D v1-3.

This is a repaint of a Fairchild C-119C in USAF colors. Ted Giana's C-119 package is needed for this repaint. Full credit to Daisuke Yamamoto for the model. This repaint is on a C-119C that was based at Lockbourne AFB Ohio in 1956. Textures are 32bit BMP. This repaint was tested on FSX-SE. It should also work on FSX, P3D v1-3.

This is a repaint of a Fairchild C-119C in USAF colors. Ted Giana's C-119 package is needed for this repaint. Full credit to Daisuke Yamamoto for the model. This aircraft was in the 40th Troop Carrier Squadron, 317th Troop Carrier Wing based in West Germany in the 1950s. It was with the Air Force until 1967 when it was retired and sent to the 'Boneyard' at Davis-Monthan AFB in Arizona in 1967. It went on to get registered in the civil registry as N13744. Finally, it was preserved at Castle Air Museum California, on an indefinite loan from the US Forest Service. It still is there today. Textures are 32bit BMP. This repaint was tested on FSX-SE. It should also work on FSX, P3D v1-3.

This is a repaint of a Fairchild AC-119K Stinger 'The Super Sow' of the 18th Special Operations Squadron (SOS) in USAF camo colors circa 1968. Ted Giana's C-119 package is needed for this repaint. Full credit to Daisuke Yamamoto for the model. In reality this is an AC-119K Stinger. The Stingers were gunships with two underwing J85 turbojet engines for excess power. 26 of these gunships were produced. Unfortunately, Daisuke Yamamoto did not make that particular model, thus the adaptation of this AC-119K is not completely true to life. Aside from that, it looks good in the USAF SEA camo. One other minor matter, due to the restictions within the model, I couldn't paint the top part of the horizontal stabilizer section in camo, as it would reflect that camo on the underside of the horizontal stabilizer as well. So, I used the black gunship color instead, which looks OK. Textures are 32bit BMP. This repaint was tested on FSX-SE. It should also work on FSX, P3D v1-3.

This is a repaint of the Fairchild AC-119G Shadow 'Charlie Chasers' of the 17th Special Operations Squadron (SOS) in USAF camo colors circa 1970. Ted Giana's C-119 package is needed for this repaint. Full credit to Daisuke Yamamoto for the model. Technically this is an AC-119G Shadow. Unfortunately, Daisuke Yamamoto did not make that particular model, thus the adaptation of this AC-119G is not completely true to life. Now if you put that aside, it looks good in the USAF SEA camo. One other minor matter, due to the restictions within the model, I couldn't paint the top part of the horizontal stabilizer section in camo, as it would reflect that camo on the underside of the horizontal stabilizer as well. So, I used the black gunship color instead, which looks OK. Textures are 32bit BMP. This repaint was tested on FSX-SE. It should also work on FSX, P3D v1-3.

FSX/Prepar3D/X-Plane Little Navmap Free Flight Planner. Navigation tool and moving map. Shows airports and navaids using OpenStreetMap background. Features: Airport traffic patterns, holdings, approach and departure procedures and much more. All FSX versions from SP2 up to P3D v4 and X-Plane 11. Windows 7-10, Apple macOS and Linux. By Alexander Barthel.