6.86Mb (775 downloads)
2020 version of (MYPI/PDI) Paradise Island Airport located in Bahamas 2 miles NE of Nassau (MYNN).All textures a great addition to a Bahamas flight route...Enjoy!!!!
Posted Jun 13, 2020 11:41 by Shawn Penn (Bahamas Flyers)
11.52Mb (859 downloads)
Welcome to Bob Hope Airport (KBUR) in Burbank California. KBUR is one of my favorite
airports to fly into. Runway 8 is used for landing and if you are long and still in the
air you better do a go-around. Some may remember when a Southwest 737 punched through the
fence and ended up on N Hollywood Way. There is an EMAS there now.
Hangar 71 is open and you can start from there by selecting "Parking 54" for your start.
I added a couple of vehicle paths that cross both runways to keep the vehicle traffic off
of the taxiways
All runways and taxiways conform to the current FAA Airport Diagram (copy included).
All the structures are new.
Posted Jun 10, 2020 12:53 by Brett Delana
96.75Mb (576 downloads)
This is a following very extensive version
of the scenery "VFR Balice for FSX/P3D5 Ext II" of the old capital Krakow in the vicinity of the airport EPKK Balice (Poland).
With even more very detailed 3D city
objects and monuments as well as with
new trees and new textures of any buildings.
Complett with hight reality ground texture,
animations and enxtended car and ship traffic.
Additional monuments attached in the scenery
are listed in the sketch.
Designer: Lotar Tomczyk, Jakub Mista
Posted May 29, 2020 05:14 by Lotar Tomczyk, Jakub Mista
24.73Mb (705 downloads)
This is the scenery of Sirena Ranger Station Aerodrome, in the Corcovado National Park, Costa Rica!
For more sceneries, check the blog address in the readme file.
Posted May 13, 2020 16:52 by Zed
103.01Mb (404 downloads)
This is the following version II of the scenery "VFR Balice for FSX"
of the old town Krakow in the vicinity of
the airport EPKK Balice (Poland).
With even more very detailed 3D city
objects and monuments as well as with
new trees and new building textures. Complete with height reality ground texture, animations and extended car and ship traffic.
Additional monuments attached in the scenery are listed in the sketch.
Designer: Lotar Tomczyk, Jakub Mista
Posted Apr 27, 2020 06:42 by Lotar Tomczyk@Jakub Mista
2.20Mb (383 downloads)
FSX scenery--Borstel airport EDOV near
Stendal in Sachsen Anhalt Germany.
Originally a WWII paratroops base, later
base of soviet jetfighters and helicopters,
but now in civilian use. By Thomas Erthner.
Posted Apr 26, 2020 12:40 by Thomas Erthner
5.79Mb (531 downloads)
Welcome to beautiful Yakima Washington, and KYKM/McAllister Airport. For 35 years CubCrafters has been pushing the envelope
for the Piper Cub. Here in Alaska the cub is the most prized bush plane around.Be sure to stop by the factory and see what
they are working on in the hangar. Visit the McAllister Museum of Aviation, and then grab a quick bite to eat at "Reno's on
the Runway".
All runways and taxiways conform to the current FAA Airport Diagram (copy included). Some hold shorts at Runway 22 have been adjusted to conform to FSX requirements.
All the structures are new.
Thanks to Jim Dhaenens for the ASR9 radar!
Posted Apr 26, 2020 02:53 by Brett Delana
1102.97Mb (4945 downloads)
MIAMI CITY X is full version of the scenery of Miami City in Florida, USA, which is now for FREE !!!
This is the full commercial product, which was removed from stores due to LatinVFR publishing of their Miami KMIA V5 scenery which also included a large part of the city at a greater quality than in our product.
Fully compatible with FSX, FSX:SE, FSW, P3Dv1, P3Dv2, P3Dv3, P3Dv4 and P3Dv5.
Our product gives you the possibility to fly over a very large area of Miami City, with photoreal day/night ground, detailed autogen, thousands of custom-made photoreal buildings, lite sceneries of KMIA Miami International Airport, KTMB Kendall-Tamiami Executive Airport and KOPF Opa-Locka Executive Airport airports and some other locations.
It's equipped with an automatic installer, which means that the scenery will be automatically added to the Flight Simulator Scenery Library.
Please uninstall all previous versions of this airport you may have installed before. Please make also sure that no duplicated AFCAD files are installed.
Enjoy your virtual flying with Drzewiecki Design!
Posted Apr 25, 2020 20:14 by Drzewiecki Design
6.32Mb (201 downloads)
This is the 2nd update to my KSJC scenery. Gates A1,A2, and A3 had no apron connection to
the taxiway network so ATC was unable to vector them properly. Several segments of taxiway Z
were coded as taxiway F which also creates ATC confusion.
Replace the two BGL files with the new ones and all will be corrected.
This update includes Update 1 released several days ago.
Thanks to Dick Bronson for bringing the error to my attention.
Required files:
required file
Posted Apr 25, 2020 12:14 by Brett Delana
6.50Mb (205 downloads)
This update to my scenery for KSJC adds current airline gate assignments to all
gates and certain ramp cargo parking assignments.
Replace the two bgl files from the original download with the ones in this download to activate.
Thanks to Steve Schwab who provided me with the info used to update the scenery!
Required files:
required file
Posted Apr 23, 2020 12:02 by Brett Delana