0.00Mb (277 downloads)
(Updated;01-May-2017) **Whats New**: - Fixed floating runway issue (The runway appeared to be levitating about 3ft / 1m above the ground). So I added a ground poly that flattens the runway) If you didnt have this issue, I recommend not installing this minor fix.
Required files:required file
Posted Apr 30, 2017 17:00 by Peter Mbirima
651.08Mb (858 downloads)
FSEarthtiles photo-real New York metro area with Water-mask overlay. Technique instructions included in readme. Approx. 537 square miles. No autogen or night textures - not tested with DX-10 or P3D.
Posted Apr 29, 2017 21:08 by Jim Waters
56.35Mb (677 downloads)
DG04 is a fictional airport located in Carinthia at the Grossglockner, the highest mountain in Austria with 12,460ft, 80km south of Salzburg. It's at 10,500ft, has 2 main runways, a smaller one, a water runway and several starts and helipads. Due to the thin air at this height, there's a downhill "runway" down to the artificial lake Moserboden for starts with props. (xD) I've also done some deco to small surrounding airports. DG04 is part of a series of meanwhile 46 smaller and bigger airports which will follow asap. A small update for my previous airport DG01 is included too. If you already have installed it, just overwrite the files. Enjoy, greetz, Dagobert
Posted Apr 29, 2017 10:47 by Dagobert
13.70Mb (926 downloads)
Borg Al Arab International Airport, Egypt, HEBA 2017 For FSX. Features: * All of the buildings and hangars models have been designed using SketchUp 2016 Numerous photographs have been used as reference. * Textures are "re-used" where possible, thereby improving frame-rates. * Airport Design editor X has been used extensively to provide parking, aprons and taxiways and to place various objects. By Mohamed El Salamoni
Posted Apr 29, 2017 04:06 by uploader
2.92Mb (221 downloads)
RAF Winthorpe opened in September 1940 and was used as a satellite for RAF Swinderby. It had a long and varied career, mainly as a Heavy Conversion unit. I am not going into too much history here as an in-depth history can be viewed on the very good Newark Air Museum site www.newarkairmuseum.org The runways, peri track and hangars are pretty much as was; As are the vast majority of the buildings, however, I cannot guarantee that the building used are 100% the correct type of building or in the actual place on the airfield, although I have done my best. (Much of the map I had was out of focus and the building listings were not complete. Anyway, I hope you enjoy my version of RAF Winthorpe.
Posted Apr 28, 2017 10:39 by Terry Boissel
601.57Mb (663 downloads)
FSX - 900 square miles (est.) of photo FSEarth tiles scenery. 2 meters/pixel for Orlando south to KMCO airport in 2 bgl files. Daytime only - no autogen.
Posted Apr 27, 2017 03:36 by Jim Waters
24.17Mb (384 downloads)
DG01 is a fictional airport located on the "Rax", a mountain range in Austria between Lower Austria and Styria, 80km away from Vienna. It's 5800ft high, has 2 main runways, 3 smaller ones, custom navaids and objects, several starts and helipads. DG01 is part of a series of meanwhile 46 smaller and bigger airports which will follow asap. Google-Earth-kmz-file is included, ICAO = DG01, coordinates are: 47.700628° (47" 42.04') 15.602656° (15" 36.16') Unzip and put the folder "Dagobert" to C:\Program Files (x86)\Flight Simulator X\Addon Scenery. Then activate "Dagobert" in the scenery library. Any 30m-mesh (or higher) is recommended (Austria Pro X, FreeMesh X Global, FS Global, FTX Global Vector) but not necessary. Enjoy, greetz, Dagobert !
Posted Apr 23, 2017 09:49 by Dagobert