Jul 23, 2018 |
FSX > Vintage > Page 6
 
... 4 5 6 7 8 9 ...
 
Panel update for the new Supermarine Spitfire by A. F. Scrub
Panel update for the new Supermarine Spitfire by A. F. Scrub
6.23Mb (594 downloads)
This is a panel update for the Supermarine Spitfire Mk VbTrop, recently uploaded by A, F. Scrub. Thanks to him for that terrific model but the panels needed some updating. New gauges and gauge configuration for both the VC and the 2D panel give them a more detailed appearance and the VC has been entirely newly designed. New VC and gauge configuration by Michael Pook.
Required files:
required file
Posted Apr 16, 2018 11:17 by Michael Pook
 
FSX/P3Dv3/v4 Spitfire Mk VbTrop
FSX/P3Dv3/v4 Spitfire Mk VbTrop
17.16Mb (808 downloads)
FSX/P3Dv3/v4 Spitfire Mk VbTrop The basic Mk V was a Mk I with the Merlin 45 series engine. This engine delivered 1,440 hp (1,074 kW) at take-off, and incorporated a new single-speed single-stage supercharger design. Several Mk I and Mk II airframes were converted to Mk V standard by Supermarine and started equipping fighter units from early 1941. The VB was the first production version of the Spitfire to use "clipped" wingtips as an option, reducing the wingspan to 32 ft 2 in (9.8 m).The clipped wings increased the roll rate and airspeed at lower altitudes. Native FSX/P3D GMAX model by A.F.Scrub
Posted Apr 15, 2018 04:45 by A.F.Scrub
 
FSX/P3D v3/v4 Hurricane two seater
FSX/P3D v3/v4 Hurricane two seater
18.07Mb (559 downloads)
FSX/P3D v3/v4 Hurricane twoseater The Hurricane was a big leap forward in performance compared to biplanes such as the I-152 in service when the Germans attacked. The Hurricane also handled differently to equivalent Soviet designs and as a result the Soviets asked for a two-seater trainer version very early on.Ten Hurricane Mk.IIs were selected for conversion which involved removing the armour behind the original pilot seat and effectively fitting a duplicate cockpit complete with second windscreen. Having gained experience building the two seat trainers the Soviets went about converting the aircraft with a second position behind the pilot for an observer who faced rearward and was thus not as obstructed by the aircraft’s wing when looking down as the pilot was. These aircraft never had full canopies fitted to them which as well as making them extremely cold in the harsh Soviet weather also caused buffeting problems at high speeds. FSX/P3D native GMAX mdl by A.F.Scrub.
Posted Apr 3, 2018 08:34 by A.F.Scrub
 
FSX/P3D Curtiss SB2C-5 Helldiver's textures
FSX/P3D Curtiss SB2C-5 Helldiver's textures
0.61Mb (297 downloads)
AIRFIX's texture for Wolfgang "Wolfi" Faber's Curtiss SB2C-4/5 Helldiver. Requires FSX updated model - link below
Required files:
required file
Posted Mar 30, 2018 06:11 by Enrique Medal
 
FSX/P3Dv3 v4 Hawker Hurricane
FSX/P3Dv3 v4 Hawker Hurricane
20.86Mb (856 downloads)
FSX/P3D Hawker Hurricane The Sea Hurricane Mk IA were Hurricane Mk I modified by General Aircraft Limited. They were modified to be carried by CAM ships (catapult armed merchantman) and called Hurricats, they could not be landed on the ship after their mission. The Hurricane Mark IIC modified with catapult spools and arrester hook were known as the Hooked Hurricane and were real carrier born fighters. FSX/P3D native GMAX model by A.F.Scrub.
Posted Mar 26, 2018 03:27 by A.F.Scrub
 
FSX Curtiss (Wolfi) SB2C-1 to 5 Helldivers Improved Combined Package
FSX Curtiss (Wolfi) SB2C-1 to 5 Helldivers Improved Combined Package
71.36Mb (800 downloads)
The two packages that are contained in this offering was previously offered in 2 seperate packages, but for ease of distribution I've now combined these. I also did the following: 1. The aircraft.cfg files were tweaked. 2. Many textures were improved/corrected, they now sports the relevant stencilling as is applicable to the type. 3. The previously incorrect textured wing cannon issues that showed up on these models due to incorrect textures were also fixed, now all of these are case-specific to each of the related Helldivers as these are now colour-coded for the respective aircraft concerned. 4. The wheel-rims are also corrected and much more crisper. 5. The prop-blade textures was also improved.
Posted Mar 26, 2018 03:24 by Andre Ludick
 
FSX HurricaneX V2.0 Aeroplane Heaven Packaged and Updated
66.80Mb (1022 downloads)
The different Hurricanes contained in this offering is possible the best freeware ones that are avaiable to the 'simming-community'. It was however not avaiable in an all-inclusive package as many downloads from other sites was required if one would want to compile a noteworthy package. This is exactly what I went and did, and more: 1. The aircraft.cfg file was tweaked. 2. Some textures were improved/corrected. 3. Two brand new Night Fighter textures were added that was created by me. 4. The previously textureless issues that showed up on these models due to the incorrect mapping or lack of textures for the cannon-armed Hurricanes was also fixed, now all of these are case-specific to each of the related Hurricanes as these are now colour-coded for the respective aircraft concerned.
Posted Mar 26, 2018 02:47 by Andre Ludick
 
FSX/FS2004 Spitfire TR.9 Clean (Textures Only)
FSX/FS2004 Spitfire TR.9 Clean (Textures Only)
3.20Mb (177 downloads)
This is an extra, cleaned-up version texture set for an existing package available from this site. Requires 'Spit_9T.zip' of Mr. AF. Scrubb to work.
Required files:
required file
Posted Mar 26, 2018 01:54 by Andre Ludick
 
FSX ALPHA P-51D Mustang 'Quick Silver' (Texture Only)
FSX ALPHA P-51D Mustang 'Quick Silver' (Texture Only)
8.15Mb (226 downloads)
This is an improved, much crisper texture set for an existing ALPHA package, it now sports ALPHA-channelled textures. I did everything that I possibly could to make this offering as representative as possible a specimen of the real one. The only area that I wish I could have made to look better is the spinning prop effect, but due to limitations within simulation what is contained in this offering is the best I can do. Requires 'ALPHA_P-51DupX.zip' available from Simviation to work.
Required files:
required file
Posted Mar 26, 2018 00:56 by Andre Ludick
 
FSX/P3D (V.3) Dornier Wal (whale) with updated panels
FSX/P3D (V.3) Dornier Wal (whale) with updated panels
32.83Mb (772 downloads)
The Dornier Do J Wal ("whale") was a twin-engine German flying boat of the 1920s designed by Dornier Flugzeugwerke In the military version (Militärwal in German), a crew of two to four rode in an open cockpit near the nose of the hull. Several countries, notably Italy, Norway, Portugal, Uruguay and Germany, employed the Wal for military tasks. The civil version had a cabin in the nose, offering space for up to 12 passengers, while the open cockpit was moved further aft. Main users of this version were Germany, Italy, Brazil and Colombia. The Norwegian polar explorer Roald Amundsen used two Dornier seaplanes in his unsuccessful attempt to reach the North Pole in 1925. His two aircraft, N-24 and N-25, landed at 87° 44' north. It was the northernmost latitude reached by any aircraft up to that time. This is an FSX update for the FS2002 model of the Wal, posted by the "Freeware Project Dornier Whale" in 2003. It features three closed cabin models and one open cabin model in four different liveries. The focus of this update lies on completely reworked VCs and new 2D panels, giving the cockpits a much more realistic appearence. Included are three different panels (two for the closed cabin model and one for the open cabin) with now all German authentic gauges of the 1920s. Thanks to Michael Garbers, Wolfram Beckert, Uwe Hochmuth and Markus Senkbeil for the original models, reworked VCs and new 2D panels by Michael Pook.
Posted Mar 22, 2018 08:29 by Michael Pook
 
 
... 4 5 6 7 8 9 ...