23.47Mb (725 downloads)
FSX/P3D v3,v4,v5 Fokker D VII The Fokker D.VII was a German World War I fighter aircraft designed by Reinhold Platz of the Fokker-Flugzeugwerke. Germany produced around 3,300 D.VII aircraft in the second half of 1918. In service with the Luftstreitkräfte, the D.VII quickly proved itself to be a formidable aircraft. The Armistice ending the war specifically required, as the fourth clause of the "Clauses Relating to the Western Front", that Germany was required to surrender all D.VIIs to the Allies. Surviving aircraft saw much service with many countries in the years after World War I. Native Model by A.F.Scrub
Posted Dec 19, 2021 06:55 by A.F.Scrub
26.93Mb (816 downloads)
FSX/P3D v3,v4,v5 Nieuport 17 During March 1916, the new Nieuport 17 reached the front to begin replacing the earlier Nieuport 11 and 16 fighters that had been instrumental in ending the Fokker Scourge of 1915. On 2 May 1916, Escadrille N.57 became the first unit entirely equipped with the new model. During the late 1916 and into 1917, the Nieuport 17 equipped every fighter squadron of the Aéronautique Militaire. Almost all of the top French aces flew the nimble Nieuport during their flying careers. Native Model by A.F.Scrub
Posted Dec 13, 2021 10:33 by A.F.Scrub
7.57Mb (578 downloads)
FSX/P3D v3,v4,v5 Nieuport 28 C.1
The Nieuport 28 C.1 was developed in France but was America's first fighter aircraft. It entered service in March 1918. France originally ordered it into production in 1917 only to cancel the order shortly thereafter in favor of the SPAD XIII as the standard French fighter. Native Model by A.F.Scrub
Posted Dec 10, 2021 11:14 by A.F.Scrub
21.20Mb (593 downloads)
This is a new panel for the DC4. The 2D panel is pretty good in appearance and functionality. The VC has quite a good appearance but functionality is limited. It is designed specifically for 1920X1080 screens and will not work well on smaller screens. A large monitor is recommended as the gauges are quite small. Please read instructions.
Posted Nov 26, 2021 02:49 by G. Munro
11.23Mb (1011 downloads)
FSX/P3Dv3,4,5 Yak-1,1B
Design of the Yakovlev Yak-1 medium-altitude interceptor/fighter began in November 1938, and from it evolved a series of remarkable aircraft (produced in vast numbers) which made an important mark in the history of aviation.The French Normandie Niemen regiment flew Yak1b fighters in the spring of 1943 and their leading scorer considered the Yak1b to be a much better plane than the Spitfire MkII and MkV which he had flown.
The strength of the Yak were that it was easy to fly, instilled confidence in its pilots, had a wide stable undercarriage, and was cheap and simple to produce. FSX/P3D Native models by A.F.Scrub.
Posted Oct 31, 2021 16:50 by A.F.Scrub
9.59Mb (512 downloads)
The sleek Hughes H1B Racer was built for Howard Hughes to set a Trans-America speed record in 1937, and a world speed record in 1953. Hughes set a record of 7 hours, 28 minutes from Burbank Ca., to Newark, NJ. The H1B was earlier fitted with short wings for setting a world speed record of 352MPH.
FSX native materials, animations correct, canopy animation split into door 1 and 2, DDS textures, wicked FPS, honest but challenging flight model. All credits go to Tim Conrad for this awesome aircraft. Panel, textures, smoke and FDE updates by Michael Pook. Tested in FSX only. Gauges not compatible with P3d 4+
Posted Oct 22, 2021 02:17 by Lou Boyle
0.64Mb (472 downloads)
FSX/P3Dv4,v5 Bell P63 Kingcobra_Fix
This mod fixes the flying caracteristics and the elevator trim. Use elevator trim for take off. Replace the model map, aircraft.cfg and airfile files by the new ones. Fix by A.F.Scrub.
Posted Oct 20, 2021 03:25 by A.F.Scrub
23.30Mb (918 downloads)
FSX/P3Dv4,v5 Bell P63 Kingcobra
When the United States entered World War II, the Bell P-39 was its primary fighter plane. The Kingcobra was designed to address the shortcomings of the P-39 Airacobra, it was a fast airplane . its performance approaching that of the P-51 , but since the P-51 and P-47 were in full production, about 2,400 of the 3,303 P-63s produced were sent to the Soviet Union under the Lend-Lease act. France used some in Indo-China after the end of World War II. The U.S. used it as a test plane and, in a unique version, as live gunnery target training for bomber crews. Native FSX/P3D mdls, 3 variants, by A.F.Scrub.
Posted Oct 16, 2021 10:18 by A.F.Scrub
31.01Mb (865 downloads)
Vought F4U-7 Corsair Royal Navy A130 for FSX and P3D. Alpha Bleu Ciel model converted to FSX native format by LLs. Updated with different flight dynamics and revised gauges so it now works in P3D v5. Credits to Alpha Blue, LLS, Milton Shupe for some gauge and flight dynamics. . Danny Garnier
YOU MUST FLY With Care,. practice to fly well.
Posted Oct 15, 2021 09:11 by GARNIER D
15.50Mb (452 downloads)
This is Kasenori Itoe's P-63A King Cobra. I have converted it to piston engine and modified flight dynamics. It flies very nicely. Need a prop that doesn't wipe out the graphics, the aileron trim is reversed and a VC would be nice. Hope some talented simmer can manage that. Me, I'm just a dumb pilot.
Posted Oct 6, 2021 01:41 by Alfred Bray