FSX/P3D> (incl. v4) Airbus A320-200 Air New Zealand package. Based at Aukland International Airport, Air New Zealdn has been flying since 1965, operating flights around the Australiasia as well as Europe, the far East and the USA. As of November 2018, Air New Zealand operate 30 Airbus A320-200. Added the better Thomas Ruth modified VC with latest updates by Chris Evans and Louis Quintero, camera views, jetways and wheel levels. Model by Project Airbus. Great textures by Abdullah Rahman. Enhanced VC & panel included by Thomas Ruth with updates by Francis Dore, Louis Quintero, FMC by Garret Smith. Airbus sounds included. Tested in P3D v4 and should be ok in FSX and other P3D versions. Zip preview for images. Custom packaged by Chris Evans

FSX/P3D >3 & 4 Boeing 737 MAX 7 Canada Jetlines Package with Enhanced VC Canada Jetlines (Jetlines) is a planned low cost Canadian carrier based in Vancouver and has 5 Boeing 737 Max7 on order. Native FSX Boeing 737 Max 7 model by TDS with advanced 737-800 VC added. The great new Boeing 737 Max 7 from TDS will be enjoyed by many more people who do not know how to install a VC into a FSX native model. The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. Added the great textures by T.DeNinis. There are custom Boeing sounds included for that extra realism. Use - Instrument panel - Util for ground vehicles, doors stairs, fuel trucks, buses. New Utility allows Bus, fuel, doors and more. (Go to Views - Instrument panel - Utility) VC added and aircraft.cfg edited to allow correct VC views and fixed wheel levels. Massive thanks go to TDS/Skyspirit/Posky wonderful high quality freeware models loved by millions. See docs for full credits. See VC docs to get the best out of the VC and FMC. See zip preview for larger images. Assembled and prepared for P3D V3 & 4 / FSX by Chris Evans.

This is an FSX megapack of the Russian WII fighter Polikarpov 1-16 Isha, earliar updated for FSX by Eric Hertzberger from a CF2 model. However, this package only features 12 selected liveries out of the original package, but it offers both a completely new advanced and enhanced VC and 2D panel. The VC now has been modified to get rid of the grahic bug in FSX, which displayed transparent sections of the VC walls. In addition, smoke effect has been added and an improved flight tuning now enables the aircraft to get airborne at a normal rate.Original model by Ivan Hsu, additional great textures by Morton and first update for FSX by Eric Hertzberger. New enhanced VC, smoke effect as well as new flight tuning by Michael Pook.

FS2004/fs9 Eurocopter AS350 B2 RP-C2294 ABS-CBN Ecureuil (Squirrel) The Eurocopter AS350 Ecureuil (Squirrel) is a single-engined light helicopter originally manufactured by Aérospatiale (now part of Eurocopter Group). The AS350 is marketed in North America as the AStar. AS350 B2- Higher gross weight version powered by one Arriel 1D1 engine over the B1 version with aerodynamic strake fitted to tail boom along the starboard side and angled engine exhaust duct for better yaw control.This is one of the most popular light utility helicopter due to its proven design and effective multi-role chopper. The sim model aircraft is has a very accurate flight dynamics and controls.Can hover and make a spot landing. CREDITS: MODEL by Aurélien Terriere Gauges & Panel by Cyril Pioffet Repainted by: Gerard G. Olvis www.airislandtours.com

Let C-11 (Yak -11) for FS2004 (also compatible with FSX) The Yak-11 design was based in large part on the successful Yak-3 fighter, and became the Soviet Air Force's most widely used trainer aircraft. From 1953, an additional 707 were licence-built by Let in Czechoslovakia under the name C-11 (LET C-11 in some documentation). Both Yak-11 and C-11 were used in all Warsaw Pact countries and were exported to eighteen countries. Technical Data: Wingspan 9,20 m Lenght 8,50 m Height 3,28 m Max. takeoff weight 2418 kg Max. speed 465 km/h The model is created using Gmax, with 2D cockpit, fully clickable virtual cockpit and all moving parts. The panel is optimized for 1366x768 resolution. Pavel Karásek

FSX Vertical Speed Gauge with audio callouts. A V-Speed gauge, that when installed into an aircraft panel will calculate the V1, V2 and V3 take of speeds for civilian aircraft, regardless of load or flap settings. The readout will be displayed in an easy to read format in the 2D cockpit, and also includes aural sounds for 80 knots, V1, Vrotate, and V2 speeds, at which point the VSI should show a positive rate of climb. Original gauge for FS2004 by Jacob Larsen (JEL), and modified for FSX by Anthony Eades. The first installation instructions for the V-Speed gauge "Fsx_jelair04vsp" were incomplete. This meant that the aural sounds were not activated. This download will correct that problem.

FS2002 Extra Red, white & blue smoke effects. By Sean Sugar. 25K

FS2004/2002 KOVACS "Primario I" PR-I . Project development by José Kovacs, Brazilian engineer, in 1962, in response to the Brazilian Air Force specification for low cost primary trainer. Model & textures by J R Lucariny. 1MB

FS2002 Aircraft INTER Regional Mozambique A320-200 New "Project Rabbit" Full moving parts with 32 side fuselage. New Model with fully animated parts, including funtional suspension and folding gear struts. Weight and Balance Optimized. New foto-realistic GMAX Textures in metallic colours. New fotoreal A320 series panel with full interior views (include throtlle and UP). Default sound. Designer: Apichart Owcharoenporn Model: Mike Stone Project, Panel and Texture By Mario Coelho. 4.5MB

This is version 1.2 of the model which corrects some errors or problems, present in the former version.This versione fully replace the version 1.1. The aircraft was designed by the renowned Italian designer Stelio Frati in 1955, and originally built in Italy by Aviamilano then Aeromere and later Laverda. The Falco is currently sold in kit or plans form for amateur construction by the Sequoia Aircraft Company of Richmond, Virginia. The aircraft is single-engined, propeller driven and designed for private and general aviation use. Full package for FS2004, model, custom panel and 3D VC, Two liveries. Original source file design by Chris Lampard modified and improved with 2D panel and a working 3d VC By Massimo Taccoli, Flight Dynamics made by Dennis G. Seeley.