FSX/P3D 3 & 4 McDonnell Douglas DC-10-30 Air Afrique triple livery pack. Air Afrique operated 3 DC10-30's with the following registrations: TU-TAL "Libreville", TU-TAM and TU-TAN "Niamey". These aircrafts were delivered new to Air Afrique in the 70's. TU-TAL "Libreville" was the first to enter service in February 1973, followed by TU-TAM in January 1975 and finally TU-TAN "Niamey" in August 1979. Mostly assigned to US and European routes, they were regular visitors to major international airports such as New York JFK, Paris CDG, London Gatwick, Geneva Cointrin or Rome Fiumicino. FSX Native Model (V2) by Eric Cantu and Thomas Ruth, with full animations and flexi-wings. Complete DC10 VC by Thomas Ruth, with some updated gauges by Thomas W., working wipers and also Altitude Callout. Updated flight dynamics: corrected weight and balance, aircraft geometry, contact points, flaps, fuel, autopilot, electricals and other parameters. The result gives a very realistic feel of the performances, weight and size of this "heavy" wide-body classic airliner. The flying experience is further enhanced by the fantastic GE CF6-50C turbofan engine and environment sounds, from original sound files by Benoit Plamondon. All textures are highly detailled, saved in DXT3 format, with updated alpha layers. Also features 12 external camera views, new lighting, new effects and correct ATC callsign, type and model. Jetway ready (CTRL-J). Frame rate friendly. Tested with FSX Acceleration and DX10. Although not tested, should work in P3D 3 & 4.

Cape Town International Airport (FACT) FOR FSX_SP2. If it will work with P3D, I do not know but you are free to try. This scenery of FACT contains many of the buildings/hangers located at the airport. These buildings are my own custom models. The other buildings/objects are stock FSX. Simon Smieiman

LIPX, Verona 'Villafranca' Airport Italy, for FSX. New setup to a decent freeware alternative. Villafranca is located 10 km (6.2 miles) southwest of Verona, Italy and services commercial flights. During the Bosnian War, the airbase was used by NATO aircraft as a staging area. Tim van Ringen

FSX/P3D >v4 Boeing 767-300ER Blue Panorama package with advanced VC. Blue Panorama is an Italian airline based at Rome-Fiumicino airport with destinations mainly aroiund Europe but also Mexico and the Caribbean. As of March 2018, Blue Panorama operate 3 Boeing 767-300. Package includes advanced 737-800 VC added. Includes utility for ground services, cargo, stairs, etc (FSX find it under - Views/P3D Vehicle - Instrument panel - - Posky Utility) The great native FSX Boeing 767-300ER from Project Opensky/Skyspirit will be enjoyed by many more people who do not know how to install a VC, views, exits, Utilities etc into a FSX native model. The layout fof the 767 cockpit is not a million miles away from the advanced 737-800. The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. There are custom Boeing sounds included for that extra realism. Jetways also edited (Ctrl j). Exits and views corrected for FSX/P3d. I have added the high quality textures by Paul Craig, and added 767 sounds for more realism. Fixed viewpoints and jetways. See VC docs to get the best out of the VC and FMC. Packaged for P3D/FSX by Chris Evans.

FSX/P3D v3 & 4.* Boeing 747-400BCF World Airways Cargo package. World Airways was based in Atlanta Georgia and operated between 1948 and 2014. World Airways was known for it's many government contracts as well as rescue flights to Viet Nam. It ceased operations in 2014 and at that time had 2 Boeing 747-400BCF in its fleet. Project Opensky FSX native Boeing 747-400F assembled for FSX/P3D with the developed B747 VC (virtual 3d cockpit) from Alejandro Rojas Lucenda (Manual included). This is the Project Opensky FSX native Boeing 747-400 model, and includes ground cargo servicing, stairs (FSX - Go to Views - Instrument Panel -Posky Utility. In P3D go to Vehicle - Instrument panel - Posky Utility), opening nose section and more. Included CF engine sounds with realistic jet whine to make your flight sound great. Thank you to Project Opensky for their contributions to the worldwide community of flight simulation. I have added the great textures by Wayne Jarret. Also includes the Boeing 747 VC textures upgrade. This give a much clearer 747 interior virtual cockpit look. Assembled, edited and tested in FSX Acceleration and P3D up to v4 by Chris Evans.

Views ( defined by camera definitions in the aircraft.cfg file ) for the beautiful Hughes OH-6 Loach. Original model by Tim Conrad Piglet. 10 cameras pointing at the aircraft and a total of 3 views in the 3D cockpit. See Read me.txt file for very easy installation procedures. One camera definitions.txt file for all models And finally two more files - Available.pdf and Top 20.pdf for informations about my "camera definitions" packages.

AF=Midway Mission Pak 1 - USN TF-16/17 Morning Attack on Kido Butai Here's the first installment of the AF=Midway Mission packages. Sorry to have to start you in the middle but the new AF Scenery is causing some FPS problems. This package contains 5 extremely detailed missions covering TF-16/17's first attack on Kido Butai. It also contains an Effects Package and a Custom Sounds package. Missions: AF USN 5 Devastating Sacrifice - VT-6, AF USN 6 Thach's Weave - VF-3, AF USN 7 VS-6 Hell Divers! - VS-6, AF USN 8 The Best of Best - VB-6, AF USN 9 Damn Gadgets - VB-3. As true to the History as we could make them. From the AF=Midway Project Team. 1.4MB

Airport v2.60 Build 116 Full Install Freeware program for composing airport scenery for Microsoft Flight Simulator. This version supports FS versions through FS 2000 and CFS II. Many improvements have been made to support Windows 98/2000 and FS2000. The install includes SCASM v2.50 scenery compiler. Users with prior installation of Airport v2.60 should install the Build Upgrade. Original Airport written by Pascal Meziat. Airport v2.60 by Tom Hiscox SCASM written by Manfred Moldenhauer and used with permission. 6.7MB

FSX Repaint of Vampire F3 of Langley Museum Enclosed is a repaint to attempt to reflect DH-100 Vampire currently in Canadian Museum of Flight, Langley, BC collection. Sadly I wasn't able to get the labels right, but photoshopped from several photos nose paint + tail boom letters. Requires DeHavilland Vampire F3 by Simone Pratticò and updated by Bob Chicilo. By Josef.

FSX/Acceleration/FS2004 Flying Ship Hughes H-4 "Spruce Goose". The Hughes ASircraft Company H-4 was due to WWII designed as strategic airlift. Lack of Aluminium the world hugest aircraft was made almost entirely of birch wood and this made her communly known as "Spruce Goose". It was a joint project of Henry J. Kaiser and Hughes Aircraft Company. By 1944, it had lost its strategic importance. Howard Hughes himself made only one test flight with ground effect in about 10 m/33 feet height and for less than one mile, on Nov.2,1947. In the 80th the "Spruce Goose" was displayed in Long Beach/California under a large dome and next to the former ocean liner "Queen Mary". Since 1993 the "Spruce Goose" can be visited in the Evergreen Aviation & Space Museum McMinnville/ Oregon. The model comes with a photorealistic 2D panel and the VC showes the complete cockpit including all the crew desks and equipments and the passenger seats for the invited persons of the test flight. When on water surface, special animations sends a motor yacht to the exit door whilst Howard Hughes waits for the boat. Seventeen FSX cameras showes you the giant from its best sides and let you explore the huge cockpit. FSDS 3.5 model by Erwin Welker. SEE FIX ABOVE