VREF_A320 is a chart for takeoff and landing speeds for the A320. This FS2004 gauge displays the Vspeeds (V1,Vr,V2,f,s,o), and landing reference speeds (Vs, Vls, Vref, Vapp)with full flaps configuration. Click on the icon at the ground and in base of the aircraft's weight you will see the TakeOff Vspeeds that you can insert in your FMC. Click on the icon in flight and in base of the aircraft's weight you will see the Landing reference Vspeeds that you can insert in your FMC. The Reference speeds are only calculated for the Airbus A320.

MDCY Samana airport (El Catey Intl), Dominican Republic for FSX made with ADE9x. (without the huge tiff file this time)

FSX/P3D Airbus A319-100 Delta Airlines 2020 model package. Based in Atlanta, Delta Air Lines is the world's 2nd largest airline and currently have 57 Airbus A319 flying mainly within US locations. The A319 is a shorter version of the A320 family. Custom Airbus sounds. Also added jetway configs (Ctrl J). Revised original VC by Microsoft updated by Collin MacKenzie to include built in FMC and more. Textured and assembled for P3D5 (Should also work in other P3D and FSX) by Chris Evans

FSX/P3D Airbus A330-200 Corsair International Package. Corsair is a subsidiary of the TUI Group and is based at Paris-Orly Airport, France. As of May 2019, Corsair operate 2 A330-200 and fly to destinations around Europe, Africa and North America. Model by Thomas Ruth. Added the better Thomas Ruth modified VC with latest updates by Chris Evans and Louis Quintero. Fixed contact points. Added wing views and better VC. Includes built in FMC by Garret Smith. FMC will display in VC. Includes A330 manual. Custom A330 sounds and checklist included. FSX : requires either FSX Acceleration or Service packs 1 & 2. Textured, assembled and tested in P3Dv4 by Chris Evans Should also be fine in FSX and earlier P3D versions.

FSX/P3D 3 & 4 McDonnell Douglas DC-10-30 Air Afrique triple livery pack. Air Afrique operated 3 DC10-30's with the following registrations: TU-TAL "Libreville", TU-TAM and TU-TAN "Niamey". These aircrafts were delivered new to Air Afrique in the 70's. TU-TAL "Libreville" was the first to enter service in February 1973, followed by TU-TAM in January 1975 and finally TU-TAN "Niamey" in August 1979. Mostly assigned to US and European routes, they were regular visitors to major international airports such as New York JFK, Paris CDG, London Gatwick, Geneva Cointrin or Rome Fiumicino. FSX Native Model (V2) by Eric Cantu and Thomas Ruth, with full animations and flexi-wings. Complete DC10 VC by Thomas Ruth, with some updated gauges by Thomas W., working wipers and also Altitude Callout. Updated flight dynamics: corrected weight and balance, aircraft geometry, contact points, flaps, fuel, autopilot, electricals and other parameters. The result gives a very realistic feel of the performances, weight and size of this "heavy" wide-body classic airliner. The flying experience is further enhanced by the fantastic GE CF6-50C turbofan engine and environment sounds, from original sound files by Benoit Plamondon. All textures are highly detailled, saved in DXT3 format, with updated alpha layers. Also features 12 external camera views, new lighting, new effects and correct ATC callsign, type and model. Jetway ready (CTRL-J). Frame rate friendly. Tested with FSX Acceleration and DX10. Although not tested, should work in P3D 3 & 4.

The Arado Ar-96 was a German single-engine, low-wing monoplane of all-metal construction, produced by Arado Flugzeugwerke. It was the Luftwaffe's standard advanced trainer during World War II. This package is an FSX update for a previous update by Michael Vader. It features a new VC and 2D panel, both based on the Alphasim Arado-196 floatplane. New camera views include rear-seat-view featuring the same crisp panel as the VC. According to Michael Vader, the original designer of the model is unknown, thanks to him anyway. Credits go to Michael Vader for finding this nice model on the internet and for his previous updates. Also thanks to Gary Jones for the sound. New panels and package compilation as well as new smoke effect by Michael Pook. Does not work in P3Dv4

FS2004 Avro Lancastrian (Base Package) A close derivative of the war-time Lancaster bomber, the Lancastrian was fitted with streamlined nose and tail cones. Lancastrians were used as long-range freighters, VIP transports, and jet engine test beds by the RAF, as fast long-range airliners and mailplanes by Trans Canada Air Lines, BOAC, BSAA, QUANTAS, and Alitalia, and as tankers by Flight Refuelling Ltd. Charter operators were Skyways and Silver City. Eighty-two aircraft were build, but most of them had vanished in scrapyards by the early nineteen-fifties. In the immediate post-war years, TCA offered twice-weekly Lancastrian flights from Dorval, Canada, to Prestwick and London, while BOAC and BSAA (under chief pilot D.C.T. Bennett) operated flights to Australia and South America, all based on a rather uneconomical ratio of five crew to up to fourteen passengers. The outbound leg from Hurn to Learmouth, Australia, took three days and well over fifty hours flying time, with Lydda, Karachi, and Ceylon serving as staging posts. BSAA's London to Buenos Aires flight took 56 hours. Either way, one needs to have plenty of time on one's hands to recreate these epic journeys. Gmax exterior model and textures by Manfred Jahn, FDE and 2D panel by Paul Edwards (based on a panel by Phil Perrott of Alphasim). The three texture sets included represent VM734 of 246 Squadron RAF, G-AGLY ("Norfolk") of BOAC, and G-AKFG of Flight Refuelling Ltd. By Paul Edwards, Manfred Jahn

Shareware: Addit! Pro is a comprehensive addon manager for Flight Simulator X. Easily install, manage and remove aircraft, adventures, flights, flight plans, gauges, missions, panels, A.I. airport and facilities data, scenery, sounds, textures, videos, weather and more! Archive add-ons to Addit! Pro's File Cabinet or recreate them in zip files. Modify your aircraft, panels and sounds. Automatically update FS's Scenery Library. Includes FS Configuration Manager, complete scenery library editor, ZIP/RAR support and much more! See Readme.htm for details. Requires Flight Simulator X: Standard, Deluxe, Gold or Steam Edition. By Joseph Stearns. Shareware--please register to install an unlimited number of add-ons. See Register.htm. (Previous version had 2950 downloads)

FSX Pilotable coastal frighter "Jean Yvan" with wood as payload. The wooden vessel, constructed in Quebec is now a muesum-ship. The FS-version comes with navigation bridge, sound and effects. Seven cameras allows you to explore the ship. The crane-boom can be swiveled, empty or with wood as payload. The AI-model with the textures is made by Jean-Pierre Fillion. Features for a pilotable version with panel, camera- and effectconfiguration by Erwin Welker.

Small regional airport with a runway of 1,200 m. length. Located in Barlovento region near to Higuerote's city, Venezuela. Excellent zone of beach tourism and home to a skydiving school With photo-terrain scenery from satellite imagery in Google Earth. It is not compatible with versions previous to the FSX. This scenery includes terminal building, control tower, hangars with realistic textures. Also includes a friendly Auto-Install By David Maldonado - June 2011