This is an update for FSX of the F-86H Sabre by A.F.Scrub. I added a hud and a nav/GPS switch to the 2D panel and resized the GPS. The hud could not be placed correct on the VC. I updated the flight dynamics and added a centre tank to the aircraft.cfg file. This is the whole aircraft.

This is a simple add on to any paint kit to make your paint from that new pristine look to an aircraft that has not been clean, washed, and beaten by the elements in a war time footing. It also applies to civilian aircraft such as Jet Liners and commuter aircraft, these usually do not get washed until there hourly schedule checkups. In this paint kit you will find the following items, the main “Weathering Kit” Photoshop file with all that you would need to take the BMP of the aircraft you are working on and add ageing or graphics to. Even aircraft that do not come with a paint kit can be modified since the layers are sizeable and erasable to the degree or size you need to make it fit the project you are working on. What is included in this kit. You have the following layers. 1. Palette Guide sized 4096 x 4096 to sample each layer before applying to your aircraft BMP 2. Eraser able weathering layer 4096 x 4096 once sized to your BMP size (EX: 2048 X 2048) paste over the BMP then set your eraser to about 25% add start erasing to the degree that you want to show on weathering. 3. Assorted Rivets layer 4096 x 4096 use these to replace any rivets that may have been damaged or destroyed in creating your paint these are cut able and paste able to your BMP. 4. Horizontal double Rivets layer 4096 x 4096 a line of rivets double stacked running horizontal on the BMP. 5. Horizontal dirt layer 4096 x 4096 Dirt in Horizontal position. 6. Dirt for aircraft body layer 4096 x 4096 assorted dirt that can be cut and pasted then erased down to proper level for the aircraft fuselage. 7. Exhaust smoke layer 4096 x 4096 smoke for marking the body wear hot exhaust gasses would show on aircraft that have extensive use. 8. Rivets 2 layer 4096 x 4096 a second layer of smaller rivets in physical size to help you realign those missing ones when painting. 9. Panel lines layer 4096 x 4096 replacement lines to use when adding graphics to you paint. 10. Fuel Spillage layer 4096 x 4096 sizeable, eraser able, fuel track from leaky reloading. 11. Tire Dirt 1 layer 4096 x 4096 a small tire dirtying layer. 12. Tire Dirt 2 layer 4096 x 4096 a larger tire dirtying layer. 13. Oil and grime layer 4096 x 4096 oil and hydraulics fluids leaking along service doors and control surfaces areas. 14. Vertical grime layer 4096 x 4096 Grime running in the Vertical direction. 15. Fuselage Grime layer 4096 x 4096 general dirt and grime to add to areas of your aircraft. 16. Dark shading layer 4096 x 4096 shading to add under wings or ailerons of aircraft. 17. Oil spots layer 4096 x 4096 leaking oil spots. 18. Paint chips 1 layer 4096 x 4096 assorted chips and dings on aircraft paints. 19. Paint chips 2 layer 4096 x 4096 a larger set of paint chips. 20. Large dirt layer 4096 x 4096 surface dirt on a larger scale Flags and Emblems: In this folder you will find many graphics and emblems used by the military and general aviation companies. Including USAF, USMC, NASA, EMS, USFS, EXXON, RNZAF, RAAF, RAF, RCAF, BORDER PATROL, USGS, and many other countries and agencies that you may want to paint. Aviation Placards: In this folder you find placards that are located throughout military and civilian aircraft. Pin-Ups: Just what the title states; a folder of small very attractive art work of the female form.NASA MARKINGS 1 and 2: All of the markings from NASA including their famous worm font.

FSX/P3D Airbus A350-900XWB Yemenia package. Based at Sana'a International Airport, Yemen's flag carrier airline flies to destinations around North Africa, the Middle East and India. As of August 2019, Yemenia have 10 A350-900 on order. Added Garmin G1000 MFD and PFD popups and added FSX Garmin G1000 user maual. Added the better Thomas Ruth VC with updates by Louis Quintero and Chris Evans. Use FMC under Views/Instrument panel in FSX menu. (FSX : Go to Views -Instrument Panel. P3D: Go to Vehicle - Instrument panel). Added better views. Textures by Adam Hamada. The Airbus A350 XWB is a family of long-range, twin-engine wide-body jet airliners from the European aircraft maker Airbus. The A350 is the first Airbus aircraft with both fuselage and wings made mainly from carbon fibre structure. The A350 is intended to replace the A340 and compete with Boeing's 787 and 777. Textured, assembled and tested in P3Dv4.3 and should be ok in FSX and earlier P3D versions by Chris Evans.

Catania LICC area (V1.2), Sicily. This scenery covers the area around Catania Fontanarossa Airport for FSX Default and for compatible paywere LICC_FSX airport by www.ivanomarongiu.it

X-Plane 11 Focke-Wulf FW 44C Stieglitz 1.0. The Focke-Wulf Fw 44 is a 1930s German two-seat biplane known as the Stieglitz ("Goldfinch"). It was produced by the Focke-Wulf company as a pilot training and sport flying aircraft. It was also eventually built under license in several other countries. The Fw 44C was the main production version with minor equipment changes, and was powered by a seven-cylinder Siemens-Halske Sh 14a radial piston engine. Credit goes to Beber for the use of his pilot. By Philippe Gastebois.

Four PWD Let-410 models: L-410 UVP ; L-410 UVPE ; L-410 UVPT and L-410 FG converted to FSX native format. Original model development by the Pannon Wings Design Team of Bence Benedek, Tibor Kokai and Jiri Masnik. Converted to FSX native format with the kind permission by Tibor Koka. This package comes with updated panels and new enhaced cockpit textures. FSX Native conversion and replacement gauges by Bluebear VC retexturing, material enhancements and replacement gauges by. Ed Wells (Falcon409)

FSX Native Howard 250 Trigear - Release v1.0 by Milton Shupe and William Ellis, with previous contributions by Tom Falley, Scott Thomas, Ken Mitchell, and Sounds by Nigel Richards. Pilot figures by Jan Visser. This package is designed to work in FSX and was tested in P3Dv4. There is also an FS9 version available. Packages uploaded to Simouthouse, Simviation, and Flightsim. Milton Shupe August 2019

FS9/FSX Wilco Embraer E195 in Saratov Airlines livery. Repaint by Sergey Gleba aka serg09. Link to my products on SimMarket: http://secure.simmarket.com/paintsim.mhtml

FS9/FSX/P3D paint kit in Photoshop format. The files contained in this archive will allow painters to create liveries for both the Howard 250 tri-gear and tail-dragger by Milton Shupe. The kit is fully layered and comprises the 9 templates needed for a complete rendering. While the Tri-gear model uses a "stand-alone" paint kit by William Ellis for all components, the tail-dragger model requires the wing and engine components from the superb Lodestar paint kit by Rachel "Firekitten" Whiteford. These are included here with all due credit to Firekitten. Enjoy and please give credit where credit is due.

FSX Native Howard 250 Taildragger Hybrid - Release v1.0 by Milton Shupe and William Ellis, with previous contributions by Tom Falley, Scott Thomas, Ken Mitchell, Rachel Whiteford, and Sounds by Nigel Richards. Pilot figures by Jan Visser. This is a fictional design representing the transition from a taildragger to the Trigear variant. The fuselage is the new sleek Trigear fuselage while the engine nacelles, tails and wings are from the Howard 250 taildragger. The paint kit will use the Trigear fuselage kit, and the Lodestar kits for other body parts. This package is designed to work in FSX and should work okay in P3D. Packages uploaded to Simouthouse, Simviation, and Flightsim. Milton Shupe August 2019