Fly an old Grumman Bearcat warplane from Blue River through all the hoops between the mountain peaks to Kinbasket Lake airfield. Land safely and switch to an Agusta Westland EH101 Helicopter. From there, using your DME equipment, locate a scenic tour boat which is stranded somewhere on the lake due to engine problems. Drop a cargo pod of parts next to the boat then return to Kinbasket Lake airfield via the shortest route over the mountains and fly back to Blue River airport in the helicopter through all the hoops between the mountain peaks.

XP10/11 Flight Factor Boeing 777-200LR in Turkmenistan Airlines livery. Repaint by Sergey Gleba aka serg09. Link to my products on SimMarket: http://secure.simmarket.com/paintsim.mhtml

The Bell P-59 Airacomet was a twin jet-engined fighter aircraft, the first produced in the United States, designed and built by Bell Aircraft during World War II. The United States Army Air Forces were not impressed by its performance and cancelled the contract when fewer than half of the aircraft ordered had been produced. Although no P-59s entered combat, the fighter paved the way for another design generation of U.S. turbojet-powered aircraft, and was the first turbojet fighter to have its turbojet engine and air inlet nacelles integrated within the main fuselage. This an FSX update of the FS9 Kazunori Ito model and my previous FSX update featuring completetely revised panels, interior and virtual cockpit. The focus of this update lies upon the highly authentic look of VC and 2D panel. The panels have been designed according to internet images of the real panel. Thanks to Kazunori Ito for the original model. The model very likely will work in P3D,version3 as well. New panel design and gauge configuration by Michael Pook.

This is a repaint of the BAe 748-B2 in Air Virginia 1983 colors. Air Virginia purchased their first of 3 BAe 748-B2s in 1981. However, by 1985 all 3 BAe 748s were withdrawn from service in favor of an 18 unit Metroliner fleet. This particular aircraft, N748AV, was delivered to Air Virginia in 1981. Textures are 32bit bmp. This repaint was tested on FSX-SE. It should work on FSX,P3D v1-3, & FS2004. The freeware Hawker Siddeley HS-748 by Rick Piper is needed for this repaint.

FSX/P3D > v4 Boeing 737-800 Azur Air Ukraine package. Azur Air Ukraine is the Ukraine division of Russian airline Azur Air. Azur Air Ukraine is based at Boryspil International Airport and as of May 2019, operate 3 Boeing 737-800 flying to popular tourist destinations around Europe, Asia and North Africa. Package includes advanced 737-800 VC added. Including utility for ground services, Passenger bus, cargo, stairs, refuelling truck etc (find it under - Views - Instrument panel - Util) The wonderful Boeing 737-800 from TDS will be enjoyed by many more people who do not know how to install a VC into a FSX native model. The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. There are custom Boeing 737 sounds included for that extra realism. I have added the great photoreal textures by Torsten Martke. VC added and aircraft.cfg edited to allow correct VC views, jetways, wheel levels and wing views. See VC docs to get the best out of the VC and FMC. Assembled and prepared for P3D4 by Chris Evans. Will certainly also work in earlier P3D versions as well as FSX.

This is a repaint of the Fairchild Metro II in Air Virginia 1982 colors. . Lynchburg based Air Virginia was formed by Rodney H. Jaeger in January 1979, and started operations with daily flights to Washington DC. By the mid-1980s they had a route system that stretched from Newark to North Carolina, and west to Ohio, and its fleet had grown to include several Swearingen Metroliners and 3 BAe 748s. Unfortunately the airline folded in 1988. This repaint was tested on FSX-SE. It should work on FSX, FS2004 & P3Dv1-3. The freeware Fairchild Metro III by Jon Murchison is needed for this repaint

Lockheed F-117A Nighthawk Package for P3D4. Original model by Alphasim/Virtavia. FSX native MDL X conversion by N210MS at SOH. i try without success to make alpha HUD work in panel. Maybe someone? See readmes for more credits. FSX native /P3D4 GMAX model. Will work in FSX but with 2d panel only. Uploaded by Danny Garnier

Hello Aviators! It has been a while since I've uploaded something. But this time I have something special for you all. In this file, you will find the texture file of the Danish Air Transport retro livery, which has been designed by both me and my friend Njord Zonneveld. So after doing the real one, I decided to paint it for the SGA MD80 model (not included). This download file contains the textures only! I hope you like it, and make sure to check out the link underneath to see the official reveal of the real aircraft. https://www.youtube.com/watch?v=VZP1KVo-oK0

FSX/P3D FSX native Boeing 777-9 British Airways P3D4 compatible. In February 2019, British Airways placed firm orders with Boeing for 18 Boeing 777-9 with options on a further 24. This is the FSX native Skyspirit Boeing 777-9 with the FSX native internal B777 model/VC. Compatible with 64bit P3D4 versions. Correct jetways and wingview added. (From wiki: The Boeing 777X is the latest series of the long-range, wide-body, twin-engine Boeing 777 family from Boeing Commercial Airplanes. The 777X will feature new GE9X engines, new composite wings with folding wingtips, greater cabin width and seating capacity, and technologies from the Boeing 787) Thank you to Zachary777 for the native conversion of the brilliant Jacob Kubique VC. Gauges added by Chris Evans. BA textures by Dietmar Hahn, modified to work with this model by me. Tested in P3Dv4.2 and should also work in other P3D up to v4.* & FSX. Edited and packaged by Chris Evans.

Gate A Nator is a freeware pre-flight tool for FSX and Prepar3D that allows to customize a flight plan before starting a flight simulation session. Can set departing Gate position and can load flight plans from FSX/FS2004, Prepar3D, LEVELD, PMDG, Quality Wings and Flight Sim Commander, or from an ICAO route, and using Airac cycles (FSBuild2 format) to read navaids from. Installation package installs Airac Cycle 1904, that can be after updated from Navigraph. Gate/parking database is auto created and updated from FSX or Prepar3D scenery base. It supports file save and export to FS2004, FSX, Prepar3D, LEVELD, PMDG, Quality Wings, Flight Sim Commander, XPlane 11 and Aerosoft Airbus/X extended. Complete instructions guide is included in the help file.