All Files > Page 604
Airbus A320-200 Austrian Airlines
(Category: FS2004 > Civil Jets)
13.41Mb (354 downloads)
FS2004 Austrian Airlines Airbus A320-214. This is a repaint of the Project Airbus A320-214, in Austrian Airlines "Retro livery" livery, registration OE-LBP. Model included. The textures are saved in 32 bit format for quality graphics. Shine effect. Night textures by Adam Hamada. Contains accurate model with details such as: opening passenger and cargo doors, animated pack inlets and outflow valves, all operable control surfaces, detailed flap tracks and slat rails, hydraulics modelled on spoilers, landing gear doors and many more. By Stefan Bree.
Posted May 23, 2018 07:53 by chrisE
P3DV4 MPTO Tocumen International Airport 2018, Panama
(Category: Prepar3d > Scenery)
48.23Mb (349 downloads)
MPTO Tocumen International Airport updated to its latest state. Tocumen International Airport is the international airport of Panama City, the capital of Panama.
Completely revamped the default airport and added the missing terminal and taxiway.
Added gates in front of the under-construction new terminal. (the terminal is not ready, however the few gates in front of it are being used in real-life.)
Updated Taxi-Ways.
All gates from the real airport. For P3Dv4 only.
Posted May 23, 2018 03:44 by Jean Guiraud
RJAA - Narita Intl Airport, Tokyo, Japan
(Category: Prepar3d > Scenery)
1.69Mb (1074 downloads)
RJAA - Narita Intl Airport, Tokyo, Japan.
This is Ray Smith's FSX file. Ray has given me permission to modify his file for P3Dv4 and is a very accurate rendition of Narita airport to reflect today's situation. Terminal 1 completely rebuilt with all the new extensions and aprons included. All gates have been numbered and in their correct position. The new Terminal 3 added for the low cost airlines. Cargo area and its buildings updated. Assigned parking as per their website with extra parking including gates for the A380. Duplicated jetways at most of the gates are static and set to "Very Dense" with some triple jetways for the A380 set the same. Runway 16L/34R now at 2500 metres (8202 feet). All ILS approaches, taxiways and taxi signs updated and corrected to the latest charts. Extra fuel trucks, support vehicle roads rebuilt and many other scenery improvements and objects added. By Robert Catherall
Posted May 23, 2018 03:00 by uploader
P3D and FSXA T-6G Texan pack 4
(Category: FSX > Vintage)
35.36Mb (2042 downloads)
P3D and FSXA T-6G Texan pack 4.
Set of 4 North American T-6 Texan's based on the following real aircraft - 41-16486 "No.1 BFTS Terrell Field", 41-15825 "No.1 BFTS Terrell Field", B190 "No.6 BFTS Ponca City Airport" and 41-15930 "No.4 BFTS Falcon Field".
Please note that Fuel selector and magneto switch must be set in order to start engine.
3D model by David Eckert and Warwick Carter. Pilot 3D model by Michael Flahault. Added the superb textures by John Terrell. (details included). Please zip preview for larger images.
more information included.
Packaged by Chris Evans
Posted May 22, 2018 08:52 by chris evans
75th Anniversary Dam Buster Raid on the Ruhr Dams
(Category: FSX > Scenery)
8.02Mb (801 downloads)
The sceneries for the Moehne and Eder Dams before and after the attacks. Suitable only for default FSX or the preferred Aerosoft West German VFR. The plans as used for the game Celebration Flight from RAF Scampton to RAF Scampton on the 16-17 May 2018 are based on the book THE DAM BUSTERS by Jonathan Falconer. Flying time, UP to DOWN in the game was a little under 6 hours in AJ-G as Wing Commander Guy Gibson. Training for the raid was carried out with two flights, one to Wainfleet in AJ-Q and the other to the Derwent Dams in AJ-X. The raid on the Sorpe in AJ-T was the second part of the Celebration. The PR Spitfire recon flight plan from RAF Benson is presented as going to all of the Dams that were part of the brief in 1943. A PDF describes the outcomes of two Celebrations on opposite sides of the world, one in South Australia and one in The Netherlands (Koos van Menen). Packaged and flown by Ross McLennan.
Posted May 22, 2018 00:03 by Ross McLennan
FSX/P3D Airbus A350-900XWB KLM package
(Category: FSX > Civil Jets)
71.68Mb (3033 downloads)
FSX/P3D Airbus A350-900XWB KLM package.
As of May 2018, Dutch flag carrier KLM have 7 A350-900 on order.
Added the better Thomas Ruth VC with updates by Chris Evans and Louis Quintero. Use FMC under Views/Instrument panel in FSX menu. (FSX : Go to Views -Instrument Panel. P3D: Go to Vehicle - Instrument panel). Added better views.
The Airbus A350 XWB is a family of long-range, twin-engine wide-body jet airliners from the European aircraft maker Airbus. The A350 is the first Airbus aircraft with both fuselage and wings made mainly from carbon fibre structure. The A350 is intended to replace the A340 and compete with Boeing's 787 and 777.
Added the textures by Dion Methorst. Previous version had 4640 d/ls.
Tested on P3Dv4 and should be ok in FSX and earlier P3D versions by Chris Evans.
Posted May 21, 2018 12:19 by chris evans
P3D>v4.* /FSX Airbus A321-200 Air China package
(Category: FSX > Civil Jets)
68.91Mb (1034 downloads)
P3D > v4.* /FSX Airbus A321-200 Air China package. Air China is Chia's flag carrier and is based at Beijing. As of May 2018, Air China operate 61 Airbus A321 to worldwide. Native FSX model by Project Airbus. Added the great textures by He Lingyuan. Includes enhanced Thomas Ruth Airbus VC with updates by Phillip Wallaert, Louis Quintero and some further edits by Chris Evans. Fixed wheel levels. Fixed jetway codes. Tested in P3D v4. Airbus sounds included. Custom packaged by Chris Evans
Posted May 20, 2018 08:28 by chris evans
FSX/P3D Air Italy Airlines Boeing 737-Max8 textures
(Category: FSX > Civil Jets)
16.12Mb (916 downloads)
FSX/P3D Air Italy new livery textures EI-GFY for the TDS Boeing 737-Max-8
Required files:
required file
Posted May 19, 2018 09:28 by Mauro Carini
FSX/P3D>v4 McDonnell Douglas MD-83 Series Multipack 3 (updated)
(Category: FSX > Civil Jets)
72.97Mb (5853 downloads)
FSX/P3D>v4 Native McDonnell Douglas MD-83 Series Multipack 3 (updated).
Liveries included: American 'Copa 2016', Aeromexico, Southwest Old, Southwest New, Allegiant, Air Outre Mer (AOM).
This is the native SGA MD83 converted by Eagle Rotorcraft Simulations of the Eric Cantu/SGA original.
Native model by Eric Cantu/ Eagle Rotorcraft Simulations.
The VC is default FSX CRJ 700 with added FMC by Garret Smith.
I have added the great textures by Xudeva Irribarra, Dan Halpern, Yankyvictor, Juan Ernesto Oropeza.
Model is not modified in any way. VC added and textures. Fixed wheel sink. Views fixed. Brilliant new upgraded VC by David Hoeffgen
, includes built in FMC, working wipers and more (see VC docs in folder).
See VC docs to get the best out of the FMC.
Assembled and prepared and tested for P3D V3.4 /FSX by Chris Evans.
Posted May 19, 2018 04:47 by chris evans
P3D KORF - Norfolk Virginia Intl. Airport
(Category: Prepar3d > Scenery)
6.50Mb (195 downloads)
Norfolk Virginia International Airport for P3D. Originally created for FSX, this airport has been converted to work in P3D. Several improvements have been made to the default airport. The default terminal buildings have been replaced with buildings created in FSDS; aircraft gates have been correctly coded using Airport Design Editor 1.76.6704; a new airport vehicle network has been built; extra fuel trucks have been added throughout the airport; the tower view has been changed to display from the roof of the control tower; all taxiway designators are correct and all taxiway signs are correctly placed and named; there is the option to open both runways to AI traffic; the FedEx and UPS cargo areas are modeled; and Jim Dhaenen's excellent ramp lights are also included. Please refer to the README FIRST.txt file to insure proper installation of all files.
Posted May 19, 2018 04:38 by uploader