All Files > Page 605
FALE, King Shaka International Airport, Durban-South Africa
(Category: FSX > Scenery)
2.75Mb (604 downloads)
FALE, King Shaka International Airport, Durban-South Africa, for FSX.
Complete new setup. FSX by default does not have this airport. It is the primary airport in KwaZulu-Natal serving Durban, South Africa. It replaces the old airport of Durban (FADN) that is now out of service. This new Durban Airport opened its doors in 2010.
Tim van Ringen
Posted May 19, 2018 04:38 by uploader
FSX/P3D>v4 Royal Canadian Air Force Lockheed CP-140 Aurora
(Category: FSX > Military)
80.41Mb (3203 downloads)
FSX/P3D>v4 Royal Canadian Air Force Lockheed CP-140 Aurora. The Lockheed CP-140 Aurora is a maritime patrol aircraft operated by the Royal Canadian Air Force. The aircraft is based on the Lockheed P-3 Orion, but uses the electronics of the Lockheed S-3 Viking. "Aurora" refers to the Roman goddess of dawn who flies across the sky each morning ahead of the sun and also refers to the Aurora Borealis, the "northern lights", that are prominent over northern Canada and the Arctic Ocean.
The CP-140A Arcturus was a related variant used primarily for pilot training and coastal surface patrol missions. Comprehensive and detailed FSX native model by Team KBT. HD textures by Adrian Brausch. Fantastic model by Team KBT/Hiroaki Kubota. Assembled and tested in P3Dv4 by Chris Evans using available files.
Should also be fine in FSX and earlier P3D versions. Zip preview for images
Posted May 18, 2018 07:42 by chris evans
Northwest Florida Beaches International Airport
(Category: FSX > Scenery)
75.73Mb (644 downloads)
This scenery mod will add the new Northwest Florida Beaches Airport in Panama City Florida. Identifier KECP. This airport is not present in the default FSX or P3D scenery since it was not opened until 2012. This scenery features a custom modeled terminal, FBO, Cargo Building, and Tower. Custom GP textures are used to enhance the taxiway layout. I also include the current approaches so you can load them into the default GPS, The airspace around ECP has also been added, and correct ATC frequencies are used. I've also included AFCADS for other airports around Panama city including adding 4 Heliports, updating 2 seaplane bases, updating the AFCAD for Tyndall Airbase, and lastly adding the Tyndall Drone Airfield. This scenery is self contained with no additional downloads required.
Posted May 18, 2018 02:07 by CountryFlyboy
FS2004 Sikorsky JRS-1 cockpit update
(Category: FS2004 > Props)
14.99Mb (493 downloads)
A whole new cockpit layout for George Diemer's lovely Sikorsky JRS-1. Includes new VC textures and vintage gauges/instruments. Also included is a modified cfg. and new, red VC lighting.
Info and instructions included in the read me file. Enjoy!
Required files:
required file
Posted May 18, 2018 01:38 by Bob Erwin
FSX Default Boeing 737-800 Delta textures
(Category: FSX > Civil Jets)
5.44Mb (977 downloads)
New livery Delta textures for the default FSX Boeing 737-800.
Posted May 17, 2018 18:20 by Jason Lee
FSX/P3D 3/4 Boeing 737 Max 8 Blue Air Package
(Category: FSX > Civil Jets)
57.77Mb (1501 downloads)
FSX/P3D 3/4 Boeing 737 Max8 Blue Air Package with enhanced VC. Blue Air is Romania's largest airline by passengers flown and is based at Bucharest Airport. As of May 2018, Blue Air have 12 Boeing 737max8 on order.
FSX Boeing 737Max8 native model by TDS with advanced 737-800 VC added. The high detail model from TDS will be enjoyed by many more people who do not know how to install a VC into a FSX native model. The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model blended with Ken Wiggington's work on the default 737 VC. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. There are custom Boeing sounds included for that extra realism. . Use - Instrument panel - Util for ground vehicles, doors stairs, fuel truck, buses. New Utility allows Bus, fuel, doors and more. (Go to Views - Instrument panel - Utility) Model is not modified in any way. VC added and aircraft.cfg edited to allow correct VC views. Also fixed nose gear height so it no longer sinks into the ground. Added wing views. I added the great textures by Ricardo Yto Saraiva. See VC docs to get the best out of the VC and FMC.
Assembled and prepared for FSX/P3D v3/4 by Chris Evans.
Posted May 17, 2018 14:57 by chris evans
FSX/PD3 up to v4 Seafire MkIII
(Category: FSX > Vintage)
19.01Mb (1363 downloads)
FSX/PD3 v3-v4 Seafire MkIII
The definitive naval Spitfire, the Seafire Mk.III featured manually folding wings. The Mk IIIs served in the front line until 1946 and were then rapidly superseded by Griffon engined Mks XV, XVII and 47s. France equipped some of its Aeronavale squadrons with ex-Royal Navy Seafire IIIs and these saw front line service in Viet Nam in 1946/47.
It is remembered as one of the finest low level fighters afloat in 1945 and one of the few that could tackle a Japanese Zero on equal terms.. GMAX model by A.F Scrub
Posted May 17, 2018 12:29 by A.F.Scrub
Airbus A330-300 panel and pushback fix
(Category: FSX > Civil Jets)
6.94Mb (800 downloads)
Only download if you have pushback and VC issue on A330-300 uploaded by Chris Evans. Airbus A330-300 panel and pushback fix. This is a fix for pushback (with Shift P) and wrong gauge in some of my packages of Tom Ruth's A330-300. Full credit to Thomas Ruth. By Chris Evans
Posted May 17, 2018 12:23 by chris evans
Nunavik airports package, Quebec, Canada
(Category: FSX > Scenery)
37.55Mb (450 downloads)
Nunavik airports package, Quebec.
Contains 15 Nunavik airports sceneries in Quebec's north. Akulivik, Aupaluk, Donaldson/Kativik, Inukjuaq, Ivujivik, Kangirsuk, Kangiqsualujjuaq, Kangiqsujuaq, Kuujjuaq, Kuujjuarapipk, Nemiscau, Pingaluit bushstrip, Puvirnituk, Quaqtaq, Salluit, Tasuijaq and Umiujaq.
These sceneries are the same as those published individually on Quebec FSX.
Each scene is independent and contains its own information and installation instructions. So you can install the ones you want. Kuujuuaq scenery
has high complexity and the others has low to moderate complexity.
All these scenes were made according to Gilles Gauthier's Landscape of Nunavik (in the page http://www.jpfil.com/quebecfsx/relief.htm). It is strongly recommended to install this scene as well. Jean-Pierre Fillion
Posted May 17, 2018 06:42 by uploader
P3D v4 LIRF - Fiumicino Intl Airport, Rome, Italy
(Category: Prepar3d > Scenery)
2.44Mb (1239 downloads)
LIRF - Fiumicino Intl Airport, Rome, Italy.
This is Ray Smith's FSX file. Ray has given me permission to modify his file for P3Dv4. This is a very accurate version of Fiumicino International Airport with two optional files, one file with the Crosswind runway activated and in full operation, where all 3 runways will be used for takeoff/landing and one file as the default airport runway operation. Runway 16C/34C is closed and now taxiway "D". Although 16C/34C is still used under certain visibility conditions P3Dv4 will only allow one or the other. Assigned parking as per their website with extra parking including gates for the A380. The new Terminal 3 expansion added. Gates/parking now numbered in the correct order. All ILS approaches, taxiways and taxi signs updated and corrected to the latest charts. Extra fuel trucks, support vehicle roads rebuilt and many other scenery improvements and objects added. by Robert Catherall
Posted May 16, 2018 02:26 by uploader