Oct 08, 2024 |
All Files > Page 388
 
 
 
FSX/P3D Hawkins & Powers C-97G Stratoairtanker Textures
FSX/P3D Hawkins & Powers C-97G Stratoairtanker Textures
7.41Mb (448 downloads)
This repaint is designed to be used with Manfred Jahns' and company's FSX native, P3D(1-4) C-97 package. This repaint is NOT for FS2004 models. The Boeing C-97 or 377 Stratocruiser as it was also known is a gigantic radial engine transport that served as a military transport as well as a civilian airliner from the late 1940s into the 1960s. After their service was up, many sat around in the western US boneyards until eyes fell on them to become fire bombing airtankers. hawkins & Powers acquired some to turn into airtankers. Which turned out to be a labor intensive process. T-97 was a second chance airtanker, it previously was T-84. It had a massive for it's time 4,000 gallon tank installed in the belly. Making it by far, the largest air tanker in service. Even by today's standards it's still large. This however, led to it's likely downfall. It's shear size at the time limited it's use. Only being used on a few fires in Alaska and other areas in the western US and the Yellowstone Fire Storm in 1988 were it's only notable uses before it's eventual demise. It now sits at Hawkins & Powers' Museum in Greybull, WY. Repaint by: Nicholas Mitchell.
Required files:
required file
Posted Feb 28, 2020 08:14 by Nicholas Mitchell
 
FSX/P3D Airbus A330-200 MEA (Middle East Airlines) Package
FSX/P3D Airbus A330-200 MEA (Middle East Airlines) Package
77.95Mb (959 downloads)
FSX/P3D Airbus A330-200 MEA (Middle East Airlines) Package. Middle east Airlines is the national carrier of the Lebanon and based at Beirut–Rafic Hariri International Airport. As of January 2020, Onur fly 5 A330-200 to destinations around Europe, the Middle East, Asia and Africa. Model by Thomas Ruth. Added the better Thomas Ruth modified VC with latest updates by Francois Dore, Bjoern Kesten. Fixed contact points. Added wing views and better VC. Includes built in FMC by Garret Smith. FMC will display in VC. Includes A330 manual. Custom A330 sounds and checklist included. FSX : requires either FSX Acceleration or Service packs 1 & 2. Used the textures by Mathieu Vos. Assembled and tested for P3Dv4.5 by Chris Evans Should also be fine in FSX and earlier P3D versions.
Posted Feb 28, 2020 05:51 by chris evans
 
FSX Update for the Douglas A2D Skyshark
FSX Update for the Douglas A2D Skyshark
FSX Update for the Douglas A2D Skyshark (Category: FSX > Military)
44.29Mb (1592 downloads)
The A2D-1 was developed as a turboprop replacement for the iconic AD Skyraider series in the late 1940s. It was somewhat larger, faster and could carry a heavier weapons load. Unfortunately, the Allison T-40 series turboprop ran into many development delays mostly regarding reliability of the gear box which prevented the Sky Shark from being ordered into full production. It was the end of the line for prop driven attack aircraft for the US Navy. This is a major panel update for my previous FSX update to make the interior and panel look a lot more realistic. In addition to the three original textures by Paul Clawson there are two new "what-if" repaints based on textures by Juan Anotnio Martinez Castro, which he had designed for the FS2002 model by Kazunori Ito. The package also features exhaust smoke, better props and better reticule. Original native FSX model by Paul Clawson and 2D panel by Kazunori Ito. Two new repaints, new comletely reworked VC as well as new gauge configuration by Michael Pook. The model may work in FS2004 and P3D (v.3).
Posted Feb 28, 2020 05:42 by Michael Pook
 
FSX/P3D Airbus A319-100 United Airlines Package
FSX/P3D Airbus A319-100 United Airlines Package
82.79Mb (1972 downloads)
FSX/P3D Airbus A319-100 United Airlines Package. United is the world's 3rd largest airline and currently flies 81 A319-100 with a further 25 on order. The A318 is the smallest member of the A320 family and is capable of steep approach and short runway operations. Includes enhanced Thomas Ruth VC with updates by Louis Quintero and some further edits by Chris Evans (FSX : Go to Views -Instrument Panel. P3D: Go to Vehicle - Instrument panel), Custom CFM sounds. Also added jetway configs (Ctrl J). Model by Project Airbus. Added the great textures by Daniel Alamilla. Assembled for FSX/FSX Steam/P3D by Chris Evans
Posted Feb 27, 2020 01:56 by chris evans
 
Airbus A319-100 United Airlines
Airbus A319-100 United Airlines (Category: FS2004 > Civil Jets)
27.23Mb (795 downloads)
FS2004 United Airlines Airbus A319-100 (new colors), registration N801UA. Model by Project Airbus. Repaint by Daniel Alamilla.
Posted Feb 27, 2020 01:47 by ChrisE
 
Update for FSX of the Alphasim HP Victor
Update for FSX of the Alphasim HP Victor
Update for FSX of the Alphasim HP Victor (Category: FSX > Military)
24.83Mb (939 downloads)
This is an update of the Alphasim HP Victor for FSX. I have added all the wheels; given it a 2D panel; I decreased the width of the left window strut on the 2D panel, so you have a bit better view to the left; added a hud to the VC; corrected the contact points; and updated the flight dynamics. It has the range it is supposed to, and cruises at mach 0.96. I did a previous update of the aircraft, but I believe it was the one made for FS9 not the one made for FSX. This is the whole aircraft.
Posted Feb 26, 2020 16:00 by Bob Chicilo
 
FS2004/FSX Albatross DIII
FS2004/FSX Albatross DIII
FS2004/FSX Albatross DIII (Category: FSX > Vintage)
11.70Mb (1158 downloads)
FS2004/FSX Albatross DIII Development of the prototype D.III started in late July or early August 1916. Following the successful Albatros D.I and D.II series, the D.III utilized the same semi-monocoque, plywood-skinned fuselage. but adopted a sesquiplane wing arrangement broadly similar to the French Nieuport 11. The upper wingspan was extended, while the lower wing was redesigned with reduced chord and a single main spar. "V" shaped interplane struts replaced the previous parallel struts. GMAX mdl by A.F.Scrub.
Posted Feb 26, 2020 09:42 by A.F.Scrub
 
FSX Update for the French Bomber Amiot 143M
FSX Update for the French Bomber Amiot 143M
25.60Mb (771 downloads)
This is the late model of the inter war Amiot medium bomber, which was used by the French airforce in the early days of WWII. The Amiot 143M entered service in July 1935, with deliveries continuing in 1936 and 1937. About six were going to be delivered to the Spanish Republican Air Force at the beginning of the Spanish Civil War. There is no evidence, however, that these obsolete French bombers flew over Spain during the Civil War. This is an FSX update with new and much more realistic panels. Original model by Paul Clawson, modified for FS2004 by Shessie of SOH. Exhaust smoke added. New virtual cockpit, new 2D panel and exhaust smoke configuration by Michael Pook. The model may work in FS2004 and P3D(Version3)
Posted Feb 26, 2020 04:59 by Michael Pook
 
FSX/Accel/FS2004/P3dV3 Oceanliner TS Hanseatic
FSX/Accel/FS2004/P3dV3 Oceanliner TS Hanseatic
19.53Mb (1173 downloads)
FSX/Accel/FS2004/P3dV3 Oceanliner TS Hanseatic. This fast and luxury vessel with steam turbines went in Pacific service in 1930 as Empress of Japan. During WWII the ship was renamed to Empress of Scotland, now used for troup transportation, still with three furrels. After 1958 she was totaly renewed for the German Hamburg-Atlantic Line, now with an almost double passenger capacity and a swimming pool instad of the third furrel and the new name TS Hanseatic. In 1966 in the New York harbour a great fire destroyed almost the complete interior so the vessel was wrecked later in Hamburg. Twenty nine camera views let you explore the decks and the virtual navigation bridge. In FSX you even can enjoy the support of the offshore tugboat Oceanic in VC-mode. The ai-model is supposed to be used with the great tool aicarriers2 or for ai-traffic. FSDS-model and camera- and effect configuration by Erwin Welker.
Posted Feb 26, 2020 03:37 by Erwin Welker
 
DC Designs F/A-18E Top Gun Maverick textures
DC Designs F/A-18E Top Gun Maverick textures
DC Designs F/A-18E Top Gun Maverick textures (Category: Prepar3d > Payware)
3.85Mb (373 downloads)
Textures for the payware DC Designs F/A-18 Super Hornet package depicting Capt Pete "Maverick" Mitchell's aircraft, featured in the Paramount Pictures movie "Top Gun: Maverick". By Dean Crawford, DC Designs
Posted Feb 26, 2020 02:04 by Dean Crawford