FSX/FS2004/ P3D3 (Not V4) The Buccaneer was originally designed in response to the Soviet Union's Sverdlov-class cruiser construction programme. Instead of building a new fleet of its own, the Royal Navy could use the Buccaneer to attack these ships by approaching at low altitudes below the ship's radar horizon. The Buccaneer could attack using a nuclear bomb, or conventional weapons. It was later intended to carry short-range anti-shipping missiles to improve its survivability against more modern ship-based anti-aircraft weapons. The Buccaneer entered Royal Naval service in 1962. The initial production aircraft suffered a series of accidents due to insufficient engine power, which was quickly addressed in the Buccaneer S.2, equipped with more powerful Rolls-Royce Spey jet engines. The Buccaneer was also offered as an entrant into a new Royal Air Force (RAF) contest for a new attack aircraft. It was initially rejected in favour of the much more advanced supersonic BAC TSR-2, but the cost of the TSR-2 programme led to its cancellation, only to be followed by the cancellation of its selected replacement, the General Dynamics F-111K. The Buccaneer was finally purchased by the RAF, entering service in 1969. The Royal Navy retired the last of its large aircraft carriers in 1978, moving their strike role to the British Aerospace Sea Harrier, and passing their Buccaneers to the RAF. After a crash in 1980 revealed metal fatigue problems, the RAF fleet was reduced to 60 aircraft, while the rest were scrapped. The ending of the Cold War led to a reduction in strength of the RAF, and the accelerated retirement of the remaining fleet, with the last Buccaneers in RAF service being retired in 1994; in favour of the Panavia Tornado. The South African Air Force (SAAF) also procured the type. Buccaneers saw combat action in the first Gulf War of 1991, and the South African Border War. This is the excellent FS2004 model of Alphasim to whom all merits go, adjusted to its operation in FSX up to P3Dv3. We thank all those who made complementary textures ... personally and made changes in burners, smoke system, gauges, textures of VC and multiple skins of Royal Navy and Royal Air Force. Presented in a package for you. Enjoyment.....

FSX/P3D Boeing 767-300ER Air Canada Rouge package. Air Canada Rouge is a Canadian low cost airline, part of the Air Canada Group and based at Montreal-Trudeau and Toronto-Pearson airports. As of june 2019, Air Canada Rouge operate 25 Boeing 767-300 to destinations around the globe. Package includes Boeing 767 2d panel as well as the advanced 737-800 VC added. Includes utility for ground services, cargo, stairs, etc (FSX find it under - Views/P3D Vehicle - Instrument panel - - Posky Utility) The great native FSX Boeing 767-300ER from Project Opensky/Skyspirit will be enjoyed by many more people who do not know how to install a VC, views, exits, Utilities etc into a FSX native model. The layout fof the 767 cockpit is not a million miles away from the advanced 737-800. Added the Philippe Wallaert Boeing 767 2d panel plus Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model. Added HUD. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. There are custom Boeing sounds included for that extra realism. Jetways also edited (Ctrl j). Exits, wheel levels and views corrected for FSX/P3d. Boeing 767 checklist included. I have added the high quality textures by Pedro Rodriguez and added 767 sounds for more realism. Fixed viewpoints and jetways. Added wing views. See VC docs to get the best out of the VC and FMC. Assembled and tested in P3D4 by Chris Evans. Should also work in FSX and earlier P3D versions.

Air Canada Rouge Boeing 767-33A/ER on the SkySpirit2010 Boeing 767V5 model (included). This aircraft will fly in these colors from the day July 1. Also includes repaints of the Skyspirit2010 Boeing 767 ground service vehicles. Works and tested Only in FSX.

Fornebu was the main airport serving Oslo and Eastern Norway from 1939 to 1998. It was then replaced by Oslo Airport, Gardermoen and the area has since been redeveloped. This is a recreation of what the airport used to look like in the 90s. The airport has two asphalt runways, as well as two water runways and docks for floatplanes. The scenery features photorealistic ground-coverage and custom made 3D models. No tested but may also work in FSX

This is a VERY large carrier. Bigger then most airports. It was originally made for FSX but works in P3D 4 if you use the FSX to P3D Migration tool. This was the "SERVER" aircraft used on the Black Ice Air server several years ago. Be prepared to add lot of down trim when spawning. After it settles down it flies SLOW but smooth. Landing on it is sketchy due to FSX issues I haven't worked out ...Yet INSTALLER SET FOR P3D Uninstaller available after install. (This files is a self installing .exe file which simviation has scanned with Norton and found to be safe).

Changes and modifications for the MiG-29 aircraft configurations as posted by Danny Garnier on May 29, 2019. NOTE: updates have only been tested in P3Dv3. I detected radios were not functioning and in VC there were no panellights... So... Major most notable changes are VC panel lights for flying at night, radar gauges, VC camera view, better Radios, Ref and Check kneeboard files, engine heat glow effect, extra model with working missile animation, and more. Cockpit sounds and Nadia callouts probably only for P3Dv3 users or you must.... See Update-1.txt for Installation. See 'Credits.txt' in the Docs folder for everyone I could think of to pay respect. See there 'Changelog-P3Dv3.txt' for all the changes and modifications made. This is an update only, you will need the original aircraft. Assembled by: Flanker256.

Stanfield Int. CYZH, Halifaz, Nova Scotia, for FSX. All new. Wherever possible builings are modeled on photos. Rwy 6/24 changed to 5/23 and extended to 10,500'. Rwy 15/33 changed to 14/32. By Sidney Schwartz

FSX BGUK Upernavik. Upernavik Airport is an airport located in northwestern Greenland. This is a remake of Mark Bradshaw's Upernavik's airport. This package gives you remade terrain with hills around the airport which is now at the altitude of 414 feet as in reality rather than at default 4 feet, Upernavik City and sea port, airport itself and two sets of textures - summer and winter. The credits for original package (airport terminal, runway placement and taxiway) go to Mark Bradshaw, terrain, hills, texturing, city were done from scratch. By Andrzej Glowacki.

This is an update, that fixes the error that effect file Campfire_3 gives, so just copy these 2 effects files into your FSX effect folder and overwrite the earlier files

Viborg airfield EKVB. This is a local Danish airfield, located clo- se of the city Viborg in the middle of Jutland. It content of a 2 grass run-way 680x33 meters, 507x32 meters, some hangars, a parachute club and a sailplane club. The airfield is used by sailplanes,ultra-light aircraft and GA aircraft. I have added some animated things like: wind- sock and anemometer, fueltrigger with fuel- station. Otto Knudsen. 2019.