FSX/P3D v3 Hurricane two seater The Hurricane was a big leap forward in performance compared to biplanes such as the I-152 in service when the Germans attacked. The Hurricane also handled differently to equivalent Soviet designs and as a result the Soviets asked for a two-seater trainer version very early on.Ten Hurricane Mk.IIs were selected for conversion which involved removing the armour behind the original pilot seat and effectively fitting a duplicate cockpit complete with second windscreen. Having gained experience building the two seat trainers the Soviets went about converting the aircraft with a second position behind the pilot for an observer who faced rearward and was thus not as obstructed by the aircraft’s wing when looking down as the pilot was. These aircraft never had full canopies fitted to them which as well as making them extremely cold in the harsh Soviet weather also caused buffeting problems at high speeds. FSX/P3D native GMAX mdl by A.F.Scrub.

I have taken it upon myself to re work the incorrect colour and text sizes for the Just Flight Lightning F6. This is XR728 which belongs to the Lightning Preservation Group at Bruntingthorpe.

This is a repaint of the excellent Project Airbus A320-214, in Lufthansa new 2018 livery, D-AIZC. Model included. The textures are saved in 32 bit format for quality graphics. Shine effect. Night textures by Adam Hamada. Contains accurate model with details such as: opening passenger and cargo doors, animated pack inlets and outflow valves, all operable control surfaces, detailed flap tracks and slat rails, hydraulics modelled on spoilers, landing gear doors and many more. Model by Project Airbus. Textures by Stefan Bree

FSX/Acceleration/FS2004/P3d3.5 Package of Vintage Racing Cars. The package contains a Mercedes SSKL from 1931; one of the fastest and powerful cars of that era, a Bugatti 35b from 1927; winning over 1,000 races in its time and as third model a duel between this two racers. All models comes with photorealistic 2D panels and equal VCs; the SSKL even with animated hood and original engine. The FSDS 3.5 models with panels are made by Erwin Welker. The vintage gauges, lights and FDE tuningw are made by Pierre J. Carosin.

Louis Armstrong New Orleans Intl. Airport for P3D. Originally created for FSX, this airport has been converted to work in P3D. Several improvements have been made to the default airport. The default terminal buildings have been replaced with buildings created in FSDS; aircraft gates have been correctly coded using Airport Design Editor 1.76.6582; a new airport vehicle network has been built; extra fuel trucks have been added throughout the airport; the tower view has been changed to display from the roof of the control tower; all taxiway designators are correct and all taxiway signs are correctly placed and named; there is the option to open both runways to AI traffic; the FedEx and UPS cargo areas are displayed; and Jim Dhaenen's excellent ramp lights are also included. Please refer to the README FIRST.txt file to insure proper installation of all files. Created by Patrick Finch

This is a fictional repaint of the FSX default Cessna 172SP Skyhawk in "ambulance" colors. I hope you will like it :)

This package is a compilation of individually downloaded PAL aircraft compiled into one package. Philippine Airines is the flag carrier of the Philippines. Headquartered at the PNB Financial Center in Pasay City, the airline was founded in 1941 and is the first and oldest commercial airline in Asia operating under its original name. The Philippine Airlines fleet composed of wide-body and narrow-body aircraft from four families (excluding PAL Express fleet): Airbus A320, Airbus A330, Airbus A340 and its flagship, Boeing 777. As of 3 February 2018, there were 64 aircraft registered in the PAL fleet. This package includes the Philippine Airlines Airbus A350-900 repaint of Bien Vincent Garsuta Balansag. PAL does not yet operate any A350s as of now, but it will be delivered soon starting mid-2018. BONUS: Bombardier Dash 8 Q400 of PAL Express, subsidiary of Philippine Airlines. Aircrafts and textures by: Project Airbus Project Opensky Dreamwings Thomas Ruth Bien Vincent Garsuta Balansag Britney Ren Ryan Gabyo. Note: Does not include the retired fleet of PAL (such as the 747-400M)

The Vought F7U Cutlass was a United States Navy carrier-based jet fighter and fighter-bomber of the early Cold War era. It was a highly unusual, semi-tailless design, allegedly based on aerodynamic data and plans captured from the German Arado company at the end of World War II. Regarded as a radical departure from traditional aircraft design, the Cutlass suffered from numerous technical and handling problems throughout its short service career. The type was responsible for the deaths of four test pilots and 21 other U.S. Navy pilots. This is an FSX update of the FS2002/2004 model deigned by RanchoJen models and features a modified 2D panel and a highly detailed static VC (non-functional gauges). Automatic smoke and afterburner effects added. Credits go to the designers mentioned above, whom I've tried to ask their permission for this update but their E-Mail as well as the link mentioned in their readme is invalid anymore. Modified 2D panel, new static VC as well as effect configuration by Michael Pook.

FSX/P3D Airbus A340-300 TAP Air Portugal package. As of April 2018, TAP operate 4 Airbus A340-300 aircraft flying globally. These are due to be phased out in 2020. Model by Thomas Ruth. Added the better Thomas Ruth modified VC with latest updates by Chris Evans and Louis Quintero. Textures by Cillian Coleman. Incluced VC texture upgrade by Enrique Cornejo. Added correct jetway configs, wing views and wheel levels. Manual included. Assembled for FSX by Chris Evans.

FSX/P3D>v4 Boeing 747-400ERF Emirates SkyCargo Package. Emirates Skycargo is based in Dubai in the United Arab Emirates and is currently the world's 2nd largest cargo airline. As of March 2018, Emirates Sky Cargo operate 2 Boeing 747-400F flying to destinations throughout the world. Project Opensky Boeing 747-400 assembled and upgraded for FSX with the upgraded Boeing 747 internal cockpit (VC) from Alejandro Rojas Lucenda (Manual included). This is the Project Opensky FSX native Boeing 747-400F model, and includes ground cargo servicing, stairs (FSX - Go to Views - Instrument Panel -Posky Utility. P3D go to Vehicle - Instrument Panel -). Included CF engine sounds from BrandonG, with realistic jet whine to make your flight sound great. Thank you to Project Opensky for their contributions to the worldwide community of flight simulation. I have added the realistic textures by RyanC. Also includes the Boeing 747 VC textures upgrade. This give a much clearer 747 interior virtual cockpit look. Zip preview for larger pictures. Assembled and edited for P3D 3 / 4 & FSX by Chris Evans.