May 01, 2025 |
All Files > Page 4467
 
 
 
FS2004
                  Focke-Wulf FW-190 V18/U1(C-0) Kangaroo - 2.
4.95Mb (4513 downloads)
FS2004 Focke-Wulf FW-190 V18/U1(C-0) Kangaroo - 2. Original by Kazunori Ito redone by Jörg Sparbrodt This updates the power plant: It changes the turbine into a piston engine, adds the sound of a well roaring 12 Zylinder, also adds some more VC and NAV Lights as well as a blue flame with smoke effect right at the exhaust of the Hirth-Turbocharger (Everything shows up if you press "L" to switch on the lights). I also updatet the flight dynamics and added a new air-file which I borrowed from a FW190 D9. Original Sound by LuftwaffeOberst 5.1MB
Posted Jun 23, 2008 14:23 by archive
 
FS2004/2002
                  Focke-Wulf FW-190 V18/U1(C-0) Kangaroo
1.12Mb (3156 downloads)
FS2004/2002 Focke-Wulf FW-190 V18/U1(C-0) Kangaroo. The FW 190 V18 was designed and built as a prototype for the high-altitude FW 190 C. This was completed with a pressure cabin, an enlarged vertical tail surface and powered by 1 ~ Daimler-Benz DB 603G, driving a four-blade propeller and fitted with a Hirth 9-2281 turbocharger. The turbocharger was installed in a prominent ventral installation with a large air inlet. This was later revised to Fw 190 V18/U1 standard with a revised powerplant (the DB 603A engine and a DVL TK-11 turbocharger), rated at 1,600 hp (1.193 kW) at an altitude of 35,105 ft (10700 m). The FW 190 V18 was coded CF + OY and received a white outline Balkenkreuz and Hakenkreuz. By 1944 the project had been halted by technical problems and opposition to use of the DB 603 (which was needed for other aircraft types). by Kazunori Ito. 1.1MB
Posted Jun 23, 2008 14:23 by archive
 
FS2004
                  Default DC3 Copper & Brass.
FS2004 Default DC3 Copper & Brass. (Category: FS2004 > Vintage)
3.17Mb (751 downloads)
FS2004 Default DC3 Copper & Brass. To commemorate more then 65 years in service, the MSFS2004's DC3 has had a complete make over. However this time they have given their DC3 a copper and brass look. Textures by : Francis & Christopher F. Silva. 3.2MB
Posted Jun 23, 2008 14:23 by archive
 
FS2004
                  Curtiss F11C-2 "Goshawk"
FS2004 Curtiss F11C-2 "Goshawk" (Category: FS2004 > Vintage)
1.07Mb (2360 downloads)
FS2004 Curtiss F11C-2 "Goshawk". This was a 1930's Navy Fighter/Bomber equipped for carrier landings. This model has moving parts, virtual cockpit and a 3D Radial Engine. By Jack Hill. 1.1MB
Posted Jun 23, 2008 14:23 by archive
 
FS2004
                  Avro Anson Mk1 CC RAF Coastal Command 220 Squadron Textures
                  only.
0.54Mb (1631 downloads)
FS2004 Avro Anson Mk1 CC RAF Coastal Command 220 Squadron Textures only. Requires the Dave Garwood Anson Mk1 here. Repaint by Mark Smith. 553K
Posted Jun 23, 2008 14:23 by archive
 
FS2004
                    Amelia Earhart's L10E Electra
FS2004
                    Amelia Earhart's L10E Electra
FS2004 Amelia Earhart's L10E Electra (Category: FS2004 > Vintage)
9.88Mb (7060 downloads)
FS2004 Amelia Earhart's L10E Electra This aircraft is a customization, upgrade and optimization of Arik Hohmeyer's fine L10E from FS-Design Berlin. The intent was to match it as closely as possible to Earhart's L10E Lockheed Electra. Dave Bitzer's research at the Smithsonian Institute in Washington, D.C. and independent work by Alex Nicolson resulted in over two-dozen flight-dynamics changes, including proper-capacity long range tanks. Norman Hancock designed two custom panels for this historic aircraft; a classic version with a Sperry AP and a modern one with a digital AP and more navigation equipment. The Cambridge Engine Analyzer, Sextant, Drift Meter, and pop-up E6-B computer are standard on both panels. Easy one-step install. By Dave Bitzer, Norman Hancock, and Charles Wood. Intended for use with Amelia Earhart's 1937 World Flight Commemorative here. 10.1MB FS2004 Virtual Cockpit Upgrade for the Amelia Earhart Lockheed L10E Electra. This program will upgrade the fs9 Amelia Earhart Lockheed L10E by adding a Virtual Cockpit to both the Sperry Autopilot version of that aircraft and to the Modern Autopilot version. Before you can use this upgrade you must first have downloaded and installed the Earhart L10E Electra, filename l10eae01.zip. This VC is the work of Norman Hancock, who would like to thank Dave Bitzer for his help and encouragement. Thanks also to Arik Hohmeyer of FS-Design Berlin for his excellent L10E Electra, and to J. L. Stubbs for his faithful FS98 Earhart Panel; both were the basis of the Earhart L10E development. The VC Upgrade is a one-step install. 2.1MB
Posted Jun 23, 2008 14:23 by archive
 
FS2004
                  T-6 Harvard RedBull Textures only.
FS2004 T-6 Harvard RedBull Textures only. (Category: FS2004 > Vintage)
0.86Mb (1212 downloads)
FS2004 T-6 Harvard RedBull Textures only. Requires the Denis da Silva/Cliff Presley model here. 883K
Posted Jun 23, 2008 14:23 by archive
 
FS2004
                    Northrop Gamma 2A
FS2004 Northrop Gamma 2A (Category: FS2004 > Vintage)
0.54Mb (1929 downloads)
FS2004 Northrop Gamma 2A This is a FSDSv3 model of the first version of the Gamma 2. It was purchased by Texaco and named the "Sky Chief". Frank Hawks flew it to a transcontinental record in 1933. It features the usual animations, the unusual "park bench" ailerons, transparent glass, reflective surfaces and landing and nav lights.It has a 2D panel and a VC with animated controls. By Paul Clawson. 557K FS2004 Gamma 2A Update This file adds the forgotten face texture to the Gamma 2A pilot. Just replace the Gamma 2A model folder with the one in Face.zip. Paul Clawson. 153K
Posted Jun 23, 2008 14:23 by archive
 
Italian
                  Air Force, Macchi C.202 'Folgore' Textures only.
0.93Mb (1303 downloads)
Italian Air Force, Macchi C.202 'Folgore' Textures only. Lecce Training School. The Macchi C.202 was one of the best fighters of the 'Regia Aeronautica' (Royal Italian Air Force) during the WWII. Before the end of the War almost all the C.202 were converted to C.205 higher standards. Some 'survived' C.202 were used in postwar period as advanced trainers at Lecce's Flying School. This aircraft, nicknamed 'Mammolo', flown during 1947. These textures requires the excellent Macchi Mc 202 Folgore by Corrado La Posta (above). Repaint by Manuele Villa. 949K
Posted Jun 23, 2008 14:23 by archive
 
FS2004
                  Macchi C.202, sq.356.
FS2004 Macchi C.202, sq.356. (Category: FS2004 > Vintage)
4.98Mb (4331 downloads)
FS2004 Macchi C.202, sq.356. The most important Italian fighter of WWII, the Folgore was derived from the Saetta with the installation of a German Daimler-Benz 600 series engine. Fast, maneuverable, reliable, it had comparable performances with the Bf109F series. This Gmax model features highly detailed historical virtual cockpit with full military equipment, high resolution gauge textures, fully functional and clickable VC cockpit controls via custom XML gauges and XML animations. Includes damage model and multi-LOD. Accurate flight dynamics included. Detailed D.B.601 engine visible hitting spoiler key. By Corrado La Posta. 5.2MB
Posted Jun 23, 2008 14:23 by archive