This package contains autogen and inland water for FTXDes orthoscenery of Slovenia: Project Open Scenery - Slovenia.

Gautam Buddha Airport Bhairahawa (VNBW), Nepal. A small regional airport. Features photoreal terminal, building, taxiways and runways.

(Updated;01-May-2017) **Whats New**: - Fixed floating runway issue (The runway appeared to be levitating about 3ft / 1m above the ground). So I added a ground poly that flattens the runway) If you didnt have this issue, I recommend not installing this minor fix.

FSEarthtiles photo-real New York metro area with Water-mask overlay. Technique instructions included in readme. Approx. 537 square miles. No autogen or night textures - not tested with DX-10 or P3D.

DG04 is a fictional airport located in Carinthia at the Grossglockner, the highest mountain in Austria with 12,460ft, 80km south of Salzburg. It's at 10,500ft, has 2 main runways, a smaller one, a water runway and several starts and helipads. Due to the thin air at this height, there's a downhill "runway" down to the artificial lake Moserboden for starts with props. (xD) I've also done some deco to small surrounding airports. DG04 is part of a series of meanwhile 46 smaller and bigger airports which will follow asap. A small update for my previous airport DG01 is included too. If you already have installed it, just overwrite the files. Enjoy, greetz, Dagobert

Borg Al Arab International Airport, Egypt, HEBA 2017 For FSX. Features: * All of the buildings and hangars models have been designed using SketchUp 2016 Numerous photographs have been used as reference. * Textures are "re-used" where possible, thereby improving frame-rates. * Airport Design editor X has been used extensively to provide parking, aprons and taxiways and to place various objects. By Mohamed El Salamoni

RAF Winthorpe opened in September 1940 and was used as a satellite for RAF Swinderby. It had a long and varied career, mainly as a Heavy Conversion unit. I am not going into too much history here as an in-depth history can be viewed on the very good Newark Air Museum site www.newarkairmuseum.org The runways, peri track and hangars are pretty much as was; As are the vast majority of the buildings, however, I cannot guarantee that the building used are 100% the correct type of building or in the actual place on the airfield, although I have done my best. (Much of the map I had was out of focus and the building listings were not complete. Anyway, I hope you enjoy my version of RAF Winthorpe.

FSX - 900 square miles (est.) of photo FSEarth tiles scenery. 2 meters/pixel for Orlando south to KMCO airport in 2 bgl files. Daytime only - no autogen.

DG01 is a fictional airport located on the "Rax", a mountain range in Austria between Lower Austria and Styria, 80km away from Vienna. It's 5800ft high, has 2 main runways, 3 smaller ones, custom navaids and objects, several starts and helipads. DG01 is part of a series of meanwhile 46 smaller and bigger airports which will follow asap. Google-Earth-kmz-file is included, ICAO = DG01, coordinates are: 47.700628° (47" 42.04') 15.602656° (15" 36.16') Unzip and put the folder "Dagobert" to C:\Program Files (x86)\Flight Simulator X\Addon Scenery. Then activate "Dagobert" in the scenery library. Any 30m-mesh (or higher) is recommended (Austria Pro X, FreeMesh X Global, FS Global, FTX Global Vector) but not necessary. Enjoy, greetz, Dagobert !