Klagenfurt Airport (ICAO: LOWK), also known as Kaernten Airport, is the airport of Klagenfurt, the sixth-largest city in Austria. It is located near the city centre of Klagenfurt and serves some flights to European leisure and metropolitan destinations. Klagenfurt Airport consists of one small passenger terminal building which features some shops and restaurants as well as a visitors terrace. The apron provides several stands for mid-sized planes such as the Airbus A320 as well as smaller general aviation aircraft. As there are no jet bridges, busses are used for boarding. in this version: 1. Errors from Version 3 and 4 were revised 2. flicker comes to an end 3. the gates when Glock hangar and at the Christopherus - base open 4. there are seasonal textures Manfred Marbler manfred.marbler@aon.at

FS2004 Adelaide International Airport, South Australia Adelaide is currently receiving a new integrated domestic and international terminal. This file will depict this new terminal in four stages. Prior to 2004 it won't exist, then two stages of construction in 2004, 2005 then fully functional after 2005. Features 'active trees' that appear to sway in the breeze, an active docking system and the new glass sided gates can be controlled via com 1. Requires Nova and Nova Gold Textures. By Chris Hutchings 4.3MB

FS2002 Antonov AN-28. An FSDS aircraft with moving parts, including rolling wheels. Also includes a custom panel, custom gauges and a dynamic virtual cockpit. By Chuck Dome. 590K

FS2004 Boeing 797 Boeing House Colors. This aircraft should become, with a design base on the Boeing 787, the Boeing 737 replacement. This CamSim new aircraft also have 3 new Animated Ground Servicing (AGS) for this type. Model design by Camil Valiquette and paint by Camil Valiquette / Fabian Engeser. 5.7MB

FSX/P3D (incl v4) Boeing 737-800 Norwegian Air Shuttle package. Norwegian is Europe's 3rd largest low cost airline and is now operating long haul flights to New York and Los Angeles. As of October 20128, Norwegian operate 52 Boeing 737-800. Package includes advanced 737-800 VC added. Including utility for ground services, Passenger bus, cargo, stairs, refuelling truck etc (find it under - Views - Instrument panel - Util) The wonderful Boeing 737-800 from TDS will be enjoyed by many more people who do not know how to install a VC into a FSX native model. The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. There are custom Boeing 737 sounds included for that extra realism. I have added the great textures by Alejandro Magadan. VC added and aircraft.cfg edited to allow correct VC views, jetways, wheel levels and wing views. See VC docs to get the best out of the VC and FMC. Tested in P3D4 & will certainly also work in earlier P3D versions as well as FSX. Assembled by Chris Evans.

The ARX-5T (Concept 5) is a single-seat unlimited category aerobatic aircraft based on the V8-powered ARX-5X, but powered instead by the Pratt & Whitney PT6A-25C Turboprop engine. Like the ARX-5X, the Turbo Coyote designed specifically for freestyle airshow type aerobatics. The plane can easily handle compulsory competition maneuvers as well as more advanced gyroscopic maneuvers such as lomcovaks and tumbles. The ARX-5T cruises around 240kts, with a never-exceed speed of 300kts. This FSX native model contains animations, reflections, environment mapping, spec mapping and a full dynamic virutal cockpit. Although it is not a real aircraft it does have several real-world components such as the Chelton Flight Systems EAU (engine airdata unit) display, and a Hartzell "scimitar" swept blade propeller. Includes 2 models and 5 schemes with a custom smoke system. Aircraft, effects, and panel by Jason L. Terry

Air New Zealand textures for the default FSX Beech King Air 350

FSX USAFT-41 Mescalero - Cessna 172 Textures.. Military version of the Cessna 172 Skyhawk used primairly for pilot candidate screening. Repaint of default FSX C172 depicts the more powerful version, designated T-41C, used for cadet flight training at the United States Air Force Academy until 1993. By G. P. Visser.

Designed to Air Ministry Specification 2/44 the Brabazon was, at the time of it's construction, one of the largest aircraft ever built, being sized roughly between the much later Airbus A300 and Boeing 767 airliners. Despite its vast size, the Brabazon was designed to carry a total of only 100 passengers, each one being allocated their own spacious area about the size of the entire interior of a small car. Designed to pre-war airline standards, the 8 Centarus-powered Brabazon was probably at the practical limit for a piston prop-liner, and was deemed un-economic in the post-war climate, with no orders forthcoming. Often considered a failure, the Type 167 more than met it's design specs, was a pleasant, well mannered machine that pioneered fully powered flight controls, gust alleviation systems, electric engine controls, high-pressure hydraulics and advanced construction techniques. 60% of the program cost went into capital improvements at Filton and elsewhere that served the British industry well in the jet-age. The final verdict must be that the aircraft was a completely successful prototype showing what to do, and what not to do. FSX native update of the JBK Brabazon, which features a full interior, a very nice front office you could park a Rolls-Royce in, tight modelling, smooth flight model, a great autopilot and slippery frame rates. A few extra are skins provided. Model by Jens B. Kristensen, with a huge B-Z for allowing me to pillage his superb library.

Miami City X DEMO features an extremely detailed scenery of Miami City in Florida, United States, fully compatible with FSX/FSX:SE/P3Dv1/P3Dv2/P3Dv3/P3Dv4 and FSW by Dovetail. This Demo version of the commercial product is a fully functional freeware scenery, perfectly aligned with the full payware version. This ensures no problems with online (VATSIM, IVAO and multiplayer) flying in case some users have the payware scenery and some don't. The demo gives a few downtown buildings and AFCAD files for KMIA, KTMB and KOPF airports. Miami is a city located on the Atlantic coast in southeastern Florida and the county seat of Miami-Dade County. This product gives you the possibility to fly over a very large area of Miami City, with ground, autogen, hundrieds of custom-made photoreal buildings, including lite sceneries of KMIA, KTMB and KOPF airports. It's equipped with an automatic installer, which means that the scenery will be automatically added to the Flight Simulator Scenery Library. Please uninstall all previous versions of this airport you may have installed before. Please make also sure that no duplicated AFCAD files are installed. Previous version had 1313 d/l's. Enjoy your virtual flying with Drzewiecki Design!