FS2004/FSX Sound pack for the Douglas DC-6/C-118/RD6 and could also be used in the Lockheed Constellation and other large post WW2 piston aircraft.

The Vickers Valiant was the first of the V bombers used by the Royal Air Force during the fifties. The others V nuclear bombers were the Avro Vulcan and the Handley Page Victor. Original model by Mike Stone. Adaptation to FSX, 2D panels (no VC) for wide and standard screen with GPWS callout by Philippe Wallaert. See instructions for installation and configuration in the readme.txt file. Credits: Mike Stone for the original aircraft. Nice flights!

Repaint of VFA-31 Tomcatters CAG Hornet using Acceleration default F-18. Textures only.

Textures only for Thomas Ruth's A330-200 representing SAA's first A330 since wet-leasing similar aircraft from BMI, with registration ZS-SXZ.

FS2002/FS2004 Kyushu J7W1 Shinden. This fighter was a World War II Japanese propeller driven aircraft that was built in a canard design. The wings were attached to the tail section and stabilizers were on the front. The propeller was also in the rear, in a pusher configuration. It was expected to be a highly maneuverable interceptor, but only two were finished before the end of war. The J7W was developed for the Japanese Imperial Navy as a specific response to the B-29 Superfortress raids on the Japanese homeland. by Kazunori Ito. 3.4MB

FS2004 Delta Airlines MD-88 New 2007 Textures only For the SGA MD-83/88 model (required here). Features N963DL in DXT3 Clean Textures,accurate font and logos. Joe DeGregorio. 730K

Airbus A340-600 Cathay Pacific textures only for Thomas Ruth's A340-600 package

SEPECAT Jaguar M for FSX and FS9 with changes and additions. The Jaguar M was intended to operate from an aircraft carrier, his structure had been strengthened accordingly, also was equipped with a modified landing gear. The nose gear was lengthened and the main gear consisting of a single wheel. Developed by Sepecat (Dassault-Breguet and BAC). Author: Tsyntsar Victor, Kyiv, Ukraine, 2019. Model version 2.0

This PART3 of the Project was originally prepared for uploading with Part2 but we were unsure of what paint scheme might be used for the real BBMF Lancaster flypast. Koos van Menen of the Netherlands has produced the "Thumper Mk.III" paint scheme and thus it makes it possible to upload this Part. Three paints are provided for the Plane-Design BBMF PA474 Mk 1 Lancaster fitted with Merlin 24's and covering the years 2000-2013. The 2000 paint is by PD and the 2007 paint by UKMIL. As with the other two parts they are fully converted/flyable FS9 to FSX PD Lancasters by Ross McLennan. A version is also supplied for just the VC/BA view. Full aircraft are provided to fly in WVA. This is not a Dambuster aircraft and only needs to be flown at an altitude of 1000 ft over the Derwent Dams. A new scenery package is provided to ensure PA474 lands at Scampton and parks with the 5 Dambuster Ai Lancasters that survived the raid. PARTS 1 & 2 MUST BE INSTALLED and active for the two additional saved flights to work (just search "dambuster" in all FSX files). Koos has provided the paint in a form that makes it suitable for use with the payware FS9 aircraft. FS9 payware simmers should just follow the instructions in the readme_FIRST.txt file to activate PA474 as Thumper Mk.III and FLY. Enjoy!

Morningstar is a small airfield next to the N7 north of Cape Town. It is a General Aviation field. FSX Acceleration will give the best results. (Also SP2 compatable). Acceleration users will have more eye candy !