After loading a few extra AI Flightplans I noticed LAX suddenly got very crowded! So I've added some parking and gates in various parts of the airport. Enjoy!

This is a scratch built revision of the default Bell 206B III JetRanger using Gmax. Features highly detailed exterior and virtual cockpit, maximum moving parts, interactive VC, dynamic shine, and reflective textures. Now features all new XML gauges and sound system. By Eagle Rotorcraft Simulations

The Chengdu J-20 is a stealth fighter produced by the People's Republic of China. Original model by Erwin Welker. New VC, panels for wide and standard screen, gauges including GPWS callout by Philippe wallaert. Compatible with FSX versions and P3D up to v3. See instructions in the readme.txt file.

Project Airbus A318 FD-FMC Revision Package 1.55. This aircraft is based on Project Airbus A318 with following improvement: - New AIR file with new engines setting, flight dynamics - updated VC by Bjoern Kesten (fix Navigation display position) with rain effect - New VC textures, High definition, by CokiBH (2 set for night) - FD-FMC version 1.55 with 300 airports procedures, with SID, STAR, Approaches, holding pattern, DME-ARC management, preditive gradient during approach, full N1 management, real vertical navigation. Francois Dore

FS2004 ANG Textures for the F-16 Viper: For use in the Falcon16v.2 File above. Repaint By Robert "Hawk" . 4.1MB

Boeing 757-200 Guajira Airlines, Venezuela. 3 textures - "Albino", "Silver Bullet" and "Magallanes". Boeing 757-200 model by Project Opensky

This PART3 of the Project was originally prepared for uploading with Part2 but we were unsure of what paint scheme might be used for the real BBMF Lancaster flypast. Koos van Menen of the Netherlands has produced the "Thumper Mk.III" paint scheme and thus it makes it possible to upload this Part. Three paints are provided for the Plane-Design BBMF PA474 Mk 1 Lancaster fitted with Merlin 24's and covering the years 2000-2013. The 2000 paint is by PD and the 2007 paint by UKMIL. As with the other two parts they are fully converted/flyable FS9 to FSX PD Lancasters by Ross McLennan. A version is also supplied for just the VC/BA view. Full aircraft are provided to fly in WVA. This is not a Dambuster aircraft and only needs to be flown at an altitude of 1000 ft over the Derwent Dams. A new scenery package is provided to ensure PA474 lands at Scampton and parks with the 5 Dambuster Ai Lancasters that survived the raid. PARTS 1 & 2 MUST BE INSTALLED and active for the two additional saved flights to work (just search "dambuster" in all FSX files). Koos has provided the paint in a form that makes it suitable for use with the payware FS9 aircraft. FS9 payware simmers should just follow the instructions in the readme_FIRST.txt file to activate PA474 as Thumper Mk.III and FLY. Enjoy!

FS2004 XF-108 Updates. Updates the wonderful XF-108 by Paul Clawson, above. this update corrects the way the plane flys. I also added improved afterburner effects and smoke effects. Alternative panel included to give better forward view, . try it and see which one you like best. Bob Chicilo. 402K

FS2002 Corby CJ-1 Starlet. . The John Corby designed CJ-1 Starlet was Australia's first certified homebuilt design. This nimble little aircraft is powered by the venerable Volkswagon "Flat Four" air cooled car engine (which originally was an aero engine in the 1930's) from the famous Beetle & Combi van converted to aeronautical standards (Capacity ranging from 1.8l to 2.2l). The Starlet is semi aerobatic and is stressed to +-4.5G. Other noteable features of the Starlet are a cruise speed of 120kt IAS and a climb rate of 1000 feet/min all on 75Hp. The model has been designed from the "ground up" using ABACUS' FSDS version 2.11. The model features the now usual moving parts, texture reflections & Dynamic shine. The model also features a full Dynamic Virtual Cockpit (DVC) and comes in 3 flavours: The first model is one that has a full canopy & wheel spats, the second has the full canopy & NO wheel spats and finally the third model features only the Windshield & no wheel spats. The Flight Dynamics have been constructed by the use of the 1% Spreadsheets (v2.82.98). Model, Textures, Panel and Flight dynamics By David Friswell. 2.3MB

FS2004 deHavilland CC-138 Twin Otter Canadian Forces 440 Transport Squadron. Tail Number 13801 is 1 of 4 Short Nose Twin Otters based at Yellowknife, NW Territories. The file d6skyb42.zip (here) must be installed in FS2004 before using this aircraft. Model made in Gmax with wing views, dynamic shine, opening doors with sounds etc. Project by Udo Lemmob, Barry Blaisdell and Bob May - Premier Aircraft Design. 9.2MB