"imp" means imperfect, as other mesh I have already processed is of areas that have very little vegetation cover - over the land, or has large urban areas. This "imp" mesh will include some slight discrepancies of altitude (in the case of forested areas - by a magnitude sometimes of +15 metres-depending on how tall the trees are, in the jungle or forest canopy) over urban areas, or areas with a lot of vegetation cover - due to the limitations of the ASTER satellites infra red scanning cameras, and the software used to process the DEM data. Areas where there is little vegetation cover, or non urban areas, the terrain should have truer values. But I feel this ASTER DEM data is so good - why let it all go to waste - especially flying over lovely Pacific islands? So you FSX users out there will have to take all this into account when using this mesh. Grateful thanks to ERSDAC, and NASA for making this data freely available to the public. ASTER GDEM Copyright (c) 2009 - 2011 Earth Remote Sensing Data Analysis Center (ERSDAC) All rights reserved. ASTER GDEM is a product of METI and NASA.

"imp" means imperfect, as other mesh I have already processed is of areas that have very little vegetation cover - over the land, or has large urban areas. This "imp" mesh will include some slight discrepancies of altitude (in the case of forested areas - by a magnitude sometimes of +15 metres-depending on how tall the trees are, in the jungle or forest canopy) over urban areas, or areas with a lot of vegetation cover - due to the limitations of the ASTER satellites infra red scanning cameras, and the software used to process the DEM data. Areas where there is little vegetation cover, or non urban areas, the terrain should have truer values. But I feel this ASTER DEM data is so good - why let it all go to waste - especially flying over lovely Pacific islands? So you FSX users out there will have to take all this into account when using this mesh. Grateful thanks to ERSDAC, and NASA for making this data freely available to the public. ASTER GDEM Copyright (c) 2009 - 2011 Earth Remote Sensing Data Analysis Center (ERSDAC) All rights reserved. ASTER GDEM is a product of METI and NASA.

FS2004/FSX An-26B YV1402 Solar Cargo textures only for the AN26 by Vladymir Zhyhulskiy. Textures by Jose Armando Yanez and Alejandro Irausquin - YV-Repaint's!

Port Blair scenery for FS2004. This scenery contains realistic scenery for Port Blair Airport VOPB, in Andaman Nicobar islands. Andaman Nicobar islands are located in Bay Of Bangal near Myanmar and Singapore. This airport handles Indian Airlines and Jet Airways Airbus A320,319 and 321s. Models made in gmax. I added tower and the base building, vehicles using EZ library so its default.

CFS2 Repaint of the VB P-51B Mustang with the Malcom hood (complete aircraft) is intended to represent a Mustang of the 353rd FG, 8th AF. It was named LUCKY LEAKY II. This plane lost an engine and bellied in at Raydon in May 1945, and was destroyed. I have several books, mostly Squadron Signal publications, that show pictures of this plane. I thought it would be a great repaint, and took the challenge up. I'd say it came out well.Will "DaFraz" Turner. 1.8MB

Grumman Hellcat JV131.CFS - Grumman Hellcat Mk.1 by Steve Bezant Release V1.0 CFS Series Aircraft JV131 E-L was an 800 Sqn, Fleet Air Arm aircraft in Summer 1944. Aircraft was aboard HMS Emperor in the Mediterranean. Aircraft has correct gun placings and firepower in CFS. Panel and R-2800 sounds from default P-47D This model uses Chris Lampard's AFX and DP files. File size 70834

FSDS Great Planes Easy Sport .40 As far as I know this is the first RC plane made sence FS5, and they are very insuperior by todays standards. This is the Easy Sport .40 by Great Planes. By Dennis Mahan. 25K

FS2004 Douglas DC-3 Three Fuel Tank Automixture Gauge For three-tank operation, this gauge may be of interest to those pilots who like to fly without checking the "Enable automixture" function in the "Aircraft/Realism Settings" pull-down menu, but want more DC-3 realism than can be achieved with FS2004's simulation of mixture control. It requires prior installation of Beaumont and Bitzer's Douglas DC-3 Three Fuel Tank Modification, to be found in DC3_3TK.ZIP. Its purpose is to replicate the auto-rich and auto-lean settings on the mixture controls, including a fully functional mixture control. Its calibrated range of operation is from 3000 to 12000ft. density altitude. In the auto-rich position, it approximates the checked "Enable automixture" setting on the "Aircraft/Realism Settings" menu. In the auto-lean position, the mixture is leaned to increase the exhaust gas temperature about 30 degrees K. from auto-rich, and will increase achieved miles per gallon. By Dave Bitzer and Mark Beaumont. File name: DCA_3MX.ZIP. 491K

FS2004 Shipping Beacons of the German Islands, Ostfriesische Inseln, plus town of Norderney. Borkum, Memmert, Juist, Norderney, Baltrum, Langeoog, Spiekeroog, Wangerooge beacons. This scenery places beacons at each end of most of the islands and adds a representation of the fine town of Norderney. JennyAir Placeholder Scenery. ttp://www.metropoppyfield/jennyair. Chris Reynolds. 352K

FS2004 Sleepless in Seattle Empire State Building . This scenery is 15 years late. Neither Hanks nor Ryan look like they did in the movie anymore, but the Empire State Building did look peaceful that Valentines' Day evening. So, here it is. The Sleepless in Seattle Empire State Building only shows during the evening of 14-February (18h00) until dusk the next morning. The rest of the time the Empire State Building looks normal. I had to re-do the building for regular hours, as it was impossible to use the default. For free distribution only. By Fern Marques. 468K