FSX/Acceleration/P3DV3/FS2004 German frigate F222 Baden Wuerttemberg, a new vessel of the German F125-class. The package contains a pilotable and three ai-versions; one with a MH-90 helicopter doing take off and landing training. The ship is launched in 2014 and has a length of 150 m. It is armed with a 127 mm, two 27 mm and five 12.7 mm remote controled maschine guns plus Harpoon missiles and carries two Sea Lynx or MH-90 helicopters. The pilotable version has more than fourty moving parts, a complete realistic virtual nav-bridge plus a matching 2D bridge. The animations shows movements of the helicopter, Harpoon missile launches and a Zodiac boat moved down to the water surface. Twenty five camera views let you explore all decks and the virtual bridge, let you operate all weapons and the helicopter. The gauges are made by Pierre-Jean Carosin. FSDS 3.5 models and 2D panel by Erwin Welker

"imp" means imperfect, as other mesh I have already processed is of areas that have very little vegetation cover - over the land, or has large urban areas. This "imp" mesh will include some slight discrepancies of altitude (in the case of forested areas - by a magnitude sometimes of +15 metres-depending on how tall the trees are, in the jungle or forest canopy) over urban areas, or areas with a lot of vegetation cover - due to the limitations of the ASTER satellites infra red scanning cameras, and the software used to process the DEM data. Areas where there is little vegetation cover, or non urban areas, the terrain should have truer values. But I feel this ASTER DEM data is so good - why let it all go to waste - especially flying over lovely Pacific islands? So you FSX users out there will have to take all this into account when using this mesh. Grateful thanks to ERSDAC, and NASA for making this data freely available to the public. ASTER GDEM Copyright (c) 2009 - 2011 Earth Remote Sensing Data Analysis Center (ERSDAC) All rights reserved. ASTER GDEM is a product of METI and NASA.

"imp" means imperfect, as other mesh I have already processed is of areas that have very little vegetation cover - over the land, or has large urban areas. This "imp" mesh will include some slight discrepancies of altitude (in the case of forested areas - by a magnitude sometimes of +15 metres-depending on how tall the trees are, in the jungle or forest canopy) over urban areas, or areas with a lot of vegetation cover - due to the limitations of the ASTER satellites infra red scanning cameras, and the software used to process the DEM data. Areas where there is little vegetation cover, or non urban areas, the terrain should have truer values. But I feel this ASTER DEM data is so good - why let it all go to waste - especially flying over lovely Pacific islands? So you FSX users out there will have to take all this into account when using this mesh. Grateful thanks to ERSDAC, and NASA for making this data freely available to the public. ASTER GDEM Copyright (c) 2009 - 2011 Earth Remote Sensing Data Analysis Center (ERSDAC) All rights reserved. ASTER GDEM is a product of METI and NASA.

FS2004/FSX An-26B YV1402 Solar Cargo textures only for the AN26 by Vladymir Zhyhulskiy. Textures by Jose Armando Yanez and Alejandro Irausquin - YV-Repaint's!

Port Blair scenery for FS2004. This scenery contains realistic scenery for Port Blair Airport VOPB, in Andaman Nicobar islands. Andaman Nicobar islands are located in Bay Of Bangal near Myanmar and Singapore. This airport handles Indian Airlines and Jet Airways Airbus A320,319 and 321s. Models made in gmax. I added tower and the base building, vehicles using EZ library so its default.

CFS1 Guernsey Field, located on Guernsey Island, UK. Features an airport with full IFR/ILS capability, the capital of St.Peter Port,business district, manufacturing district,harbor facilities and village. Built with Airport 2.60 and CFS Scenery editor. By David Sumners aka Ddave. 1.2MB

Grumman Hellcat JV131.CFS - Grumman Hellcat Mk.1 by Steve Bezant Release V1.0 CFS Series Aircraft JV131 E-L was an 800 Sqn, Fleet Air Arm aircraft in Summer 1944. Aircraft was aboard HMS Emperor in the Mediterranean. Aircraft has correct gun placings and firepower in CFS. Panel and R-2800 sounds from default P-47D This model uses Chris Lampard's AFX and DP files. File size 70834

FSDS Great Planes Easy Sport .40 As far as I know this is the first RC plane made sence FS5, and they are very insuperior by todays standards. This is the Easy Sport .40 by Great Planes. By Dennis Mahan. 25K

Sounds for Aerospatiale AS355F1 Twin Squirrel. Internal and External Flying Sounds. Seamlessly looped engine sound for use with MS Flight Simulator 98 and 2000. Recorded from Channel 9 Twin Squirrel helicopter, early 2001. Produced by Uplink Productions. 266K

FS2004 Douglas DC-3 Three Fuel Tank Automixture Gauge For three-tank operation, this gauge may be of interest to those pilots who like to fly without checking the "Enable automixture" function in the "Aircraft/Realism Settings" pull-down menu, but want more DC-3 realism than can be achieved with FS2004's simulation of mixture control. It requires prior installation of Beaumont and Bitzer's Douglas DC-3 Three Fuel Tank Modification, to be found in DC3_3TK.ZIP. Its purpose is to replicate the auto-rich and auto-lean settings on the mixture controls, including a fully functional mixture control. Its calibrated range of operation is from 3000 to 12000ft. density altitude. In the auto-rich position, it approximates the checked "Enable automixture" setting on the "Aircraft/Realism Settings" menu. In the auto-lean position, the mixture is leaned to increase the exhaust gas temperature about 30 degrees K. from auto-rich, and will increase achieved miles per gallon. By Dave Bitzer and Mark Beaumont. File name: DCA_3MX.ZIP. 491K