FS2004 Boeing 737-400 USAir N510AU - at present a wreck in the airplane graveyard in the Mojave Desert. Default FS2004 B737-400 by Microsoft, textures by Francis F Silva of RSDG. 1.6MB

Husbos For FSX. Husbands Bosworth is located between Leicester and Northampton in the UK and is home to the UK gliding centre. Created by Virtual Flying Club team. future updates and more available at www.virtualflyingclub.co.uk

In 1969, the De Havilland DHC-6 Twin Otter 300 series (long nose) was introduced. Both aircraft performance and payload were improved by fitting more powerful PT6A-270 engines. This was a 680 hp (510 kW) engine that was flat-rated to 620 hp (460 kW) for use in the Series 300 Twin Otter. The Series 300 proved to be the most successful variant by far, with 614 Series 300 aircraft and their sub-variants (Series 310 for United Kingdom operators, Series 320 for Australian operators, etc.) sold before production ended in 1988. The Chilean Air force operate the Twin Otter since the sixties, mainly in southern territories as Llanquihue, Aysén and Magallanes regions. The resemblance of the climate and the topography between our southern regions and his native land Canada, make it optimum to operate here. Created by: Barry Blaisdell & Jens Borgstroem for FS98 Adapted to CFS1 and repainted by: Edmundo Abad Converted to CFS1 and repainted in four textures as: -DHC-6 300 #944 green/grey camouflage with high visibility markings. -DHC-6 300 #946 green/grey camouflage with low visibility markings and without door for skydiving operations. -DHC-6 300 #947 all grey camouflage with high visibility markings. -DHC-6 300 #948 green/grey camouflage with high visibility markings. I have included a damage profile for use with CFS1, with experimental armament for close support missions, tested in the DHC-6 during the "Beagle Channel crisis" (1978) : 2 x 0.50 machine gun in the wing-struts, 1 x 0.30 machine gun in the left side door, and bombs.

Repaint of the Caribou by Mike Stone depicting an Air Museum's airshow support aircraft. Requires Mike's Aircraft (above). Based on a similar plane that was parked for years at DuPage Airport in Illinois. Repaint by Don Brynelsen.

FSX Airbus A318neo British Airways package. First of all, I'll address the elephant in the room. No, the A318neo doesn't exist. However, some airlines have shown an interest in a re-engined A318. Not only would this complete the A320neo family; it would also result in reduced training costs for airlines, greater passenger comfort, and more spaces on routes between smaller airports. I decided to use the British Airways livery for the first ever A318neo, as they were one of the A318's most famous operators, flying it from London City Airport to New York. Model by Project Airbus with NEO engine mod by Dbob using Bret Herman's PW engine model. Updated VC by Speedbird77 with built in FMC by Garret Smith. PW1100G sounds included. Textured, packaged and produced by Dbob.

Additions and updates to the P3D/FSX Boeing (McDonnell Douglas) F-15 Eagle made flyable aircraft as posted by GARNIER D on Mar 9, 2019. Afterburner and engine glow effects amomg among other additions. Now no more "Your fuel level is critically low in the selected tank" message. Also working HUD in VC under P3Dv4. For full addtions list and credits read the WhatIsThis.txt. For installation read the INSTALL.txt This is my second update of the aircraft and you don't need the first update.

FSX/P3D Airbus A320-200 Sharklet Loong Air package. Chinese airlines Loong is based at Hangzhou Xiaoshan International Airport and commenced flying in 2013. Currently Loong have 28 Airbus A320-200 flying to destinations around China as well as other Asian countries. A320 sharklets model by Project Airbus updated by Collin MacKenzie. Revised original VC by Microsoft updated by Collin MacKenzie to include built in FMC and more. Textured and assembled for P3D/FSX by Chris Evans. Should work in FSX and other P3D

This is a repaint pack for Greg Pepper's CV-580 pack that's been converted to FSX Native. (also works in P3D v1-4), the air tanker version in particular. This pack holds 9 repaints in total. The Convair CV-580 was developed from the CV-240/340 family of aircraft. The CV-240/340s were originally radial powered transports from the 1950s. As the airframes aged, the want for increased performance and reliability out of the aircraft was needed. The CV-580 came to existence due to this need. The 580 differs little from it's earlier variants. However, it's largest most noticeable difference being was the retrofitting of a version of the infamous Allison T56 turboprop engine. Most notable for it's performance on aircraft such as the C-130 Hercules, P-3 Orion, and L-188 Electra. Due to the 580's similar shape and powerplant of the P-3/L-188 aircraft, some have dubbed it the "mini-P-3" or "Mini-Electra." Currently the CV-580 is operated as an air tanker only by two operators. Conair and the Government of Saskatchewan, both are operators in Canada. This pack represents 5 of Conair's CV-580s, T-42, 44, 47, 54, and 55. As well as Saskatchewan's T-471, 473, 474, and 475. These aircraft spend most of their operation in Canada. They do however, come down into the lower 48 states of the US on rare instances, and Alaska. Some were briefly contracted by the USFS to remedy a very large aircraft shortage in the US due to it's policies that crippled most of the private air tanker operators immediately following the horrific 2007 fire season. The CV-580 is capable of carrying up to 2,000 gallons of fire retardant or water. Repaints were constructed in P3D v4.5, so they shouldn't have issues in all earlier versions of FSX or P3D. FSX users will have custom thumbnails. Repaints by: Nicholas Mitchell.

HMS Attacker for CFS2 only Original 3D model by Maurizio Laurenti Adaptation for CFS2 and textures by Dino Carancini. 1.4MB

EAGLE ANGRIFF An all new Battle of Britain (German) campaign for CFS 1. Push the Bf109 to its limits as you take on the fighters of the R.A.F. on their home ground. Includes twenty four brand new missions and six aircraft. 1.3MB