Nashville Tennessee International Airport for P3D. Originally created for FSX, this airport has been converted to work in P3D. Several improvements have been made to the default airport. The default terminal buildings have been replaced with buildings created in FSDS; there are custom built hangars in the Embraer maintenance area, also created in FSDS; aircraft gates have been correctly coded and named using Airport Design Editor 1.76.6582; a new airport vehicle network has been built; extra fuel trucks have been added throughout the airport; the tower view has been changed to display from the roof of the control tower; all taxiway designators are correct and all taxiway signs are correctly placed and named; there is the option to open all runways to AI traffic; the FedEx and UPS cargo areas are modeled, as well as the Embraer maintenance area; and Jim Dhaenen's excellent ramp lights are also included. Please refer to the README FIRST.txt file to insure proper installation of all files

Detailed user manual included. For each aircraft control surface selected, AxisViewer will show the position of the joystick axis attached to the control surface, and the actual position of the control surface according to FSX/P3D. The benefits are: * Positive feedback on Control Surface Position. Ever ask yourself "Self, just what is that autopilot/autothrottle doing, anyway?!" * Allow you to manually adjust the Axis Positions to match the Control Surface Positions, so that you don't get a nasty surprise (for example, sudden change in thrust) when the autopilot and/or autothrottle is disengaged. * Verification of joystick functioning and range of motion. * Clear indication of when "dead zones" are entered. You will see the Control Surface Position "snap" to a particular value as the Axis Position approaches the dead zone. Version 1.4 adds an installer, and options for appearance. See the user manual for details.

Stock B25_Mitchell updated by The B24 Guy and Allen I removed 2d cockpit rearranged flight instruments in VC Some Gauges borrowed from R.L. Clarke off David Eckert's ground breaking b-26 and Arne Bartels Sperry Mark III gauge from way back in fs2000 Sound file from lawdog2360 for the Wright R-2600 Cyclone engine I remade F5 and F9 windows to my keep it simple format also re-did flight model, and air file a bit.

This airfield, located about 20 NM in the west of Hannover (Capital of Lower Saxony, North Germany), is the home base of the German Air Force "Air-Transport-Wing 62" flying presently Transall C-160. During the "Berlin Blockade" the airfield played an important part in supporting the "Luftbrucke".

Emsdale CNA4 for FSX. This is a self-contained scenery package to correct location and add some reality to the small airport of Emsdale CNA4, 250 km north of Toronto. This is a small airport with an unlikely concrete hangar. It was busier in the past, but is is pretty calm now. This airport has two claims to fame: First, it was used as a training camp in the 40s for Norwegian pilots, mechanics and other personnel for the war effort and Second, it was quite busy during the G8 Summit meeting that took place at the Deerhurst Resort in Huntsville. The big aircraft (Obama's and Putin's) landed in North Bay and they were rushed to Deerhust by helicopter, but all security aircraft, ground radar and other security aparatus was located at Emsdale. The scenery includes traffic of a Piper Cub. I used the default Piper Cub, so there are no planes to install. Made by Fern Marques.

Paintkits for RWD-13/13S in .psd by Rob Kowalski from FlyFreeStudio.

Puerto San José is a city on Guatemala's Pacific Ocean coast, in the department of Escuintla. It contains about 20,000 people, making it the largest place along the Pacific coast of Guatemala. It was the Pacific port for Guatemala, but this was superseded in the 20th century by Puerto Quetzal, a few kilometers to the east of the town. The Puerto Quetzal complex is the major employer in the town. The local tourist industry caters largely for weekenders from Guatemala City. San José Airport has been refurbished lately and is now the official alternate airport for Guatemala City.

VAQ-141-Shadowhawks textures only for the payware VRS SuperBug

German Molbe AAA Model By: Microsoft the Rest By: Andrew Tremblay simply install it like any other aircraft and have fun!, use F11 and F12 to steer. 1.3MB

CFS - Panels Dornier Do 335 Pfeil This panel is done by Michael Vader of PEGASUS AVIATION DESIGN for the famous two engined push pull german fighter of WWII who came too late to fight in WWII. 1.7MB