This airport was made using Airport Design Editor, Google Sketchup, and Instant Scenery 2. Albany International Airport, Is an airport located near Albany, New York. The airport has scheduled airline flights. Almost all of the buildings are custom made with photo textures to make it closer to real life. At the main terminal, I added more gates and put moving jetways. The gates have assigned parking codes. There is a parking lot next to the terminal full of cars. I put the airport access road in between the parking lot and the terminal. At the southwest ramp, I put hangars and some you can taxi inside of. If you choose to start off from the southwest DOCK gate, You will start off inside the Million Air Aviation FBO. I also put static aircraft on the ramp too. To the northwest, I put the New York Police hangar. You can start off inside this hangar by choosing the Northwest DOCK gate. Taxiing into or starting off inside a hangar will not cause a crash unless you touch the sides. To the Northeast, I put the cargo terminal with trucks. At the cargo section, I put three FedEx Cessna Caravans. I also put the control tower and the buildings. Tower views are from the roof of the control tower. To the southeast, I put small hangars and the Air National Guard Section with UH-60 helicopters. I extended runway 1/19 to the correct length of 8,500 feet. I also put red, blue, green, and purple Cessna 172s in different places around the airport. There will be more objects if your scenery complexity is set to normal (such as jetways, aircraft, and vehicles). This was all made based on Google Earth Imagery and Bing Maps. There are no night textures for the buildings. This will be added in a future version. An installer program is included to install the airport for you. There will be more versions of this that include night textures and static business jets. This is for Flight Simulator X only. By Tyler Lawrence.

FS2004 "Klingon Battle Cruiser" . The Klingon D7 Battle Cruiser. Model by Chris Herring built in FSDS v3. 1.5MB

FS2004 Flying Competition Scenery Package. Located at KNUQ, Moffett Field, California, this scenery contains challenges for single and multiplayer flight. Includes two pylon racing courses, a helicopter racing course, a thermal for sailplane races, and short takeoff and landing courses to test your piloting skills. By Ian Radcliffe. 866K

CFS2/FS2000 Sikorsky CH-53 3 Textures Package. 3 Texture sets for CH53 IAF by Shlomo Hakim (available here) Re submitted Texture Package by Jim Jacobson. 2.3MB

FS2004 Fairchild C-119 Flying Boxcar USAF. This aircraft is built for FS2004. The aircraft may or may not work in other versions. Use Shift-E to open cargo doors. Mike Stone. 948K

St Barthelemy island (TFFJ) is situated in Caribbean sea, south-east from St Marteen. Its small slope runway, between a hill and the sea, is very difficult to manage. A complete scenery of all islands with: -TFFJ Airport with slope runway -Photorealist texture of whole island in 0.5m/pixel -New mesh on basis ASTER -New waterclass -Generic objects (pylons, cranes, ships, boats and buildings) -Some remarkable buildings -Additional local houses in autogen -Additional boats -traffic

Coca Cola Christmas textures for the default B737-800 FSX.

FS2004/2002/CFS2 KA-3B Skywarrior Tanker. Skywarrior Biggest and heaviest aircraft ever designed for routine use from an aircraft carrier, the Skywarrior was the Navy's first twin-jet nuclear bomber and has been in service for over twenty years designed with cfs2 in mind, but should work in other sims by Rey Lopez and Bruce Baker. 2.7MB

FS2004 Channel Islands Islander Pack I have included the full aircraft in this pack with various liveries seen around the Channel Islands, comprising of Aurigny Air Services, (now the state airline of Guernsey), both a cleaned up version of my first attempt early 1970s, and the last colour scheme used by the Islander, Channel Islands Air Search, done by myself . Rockhopper, sorry I can’t remember who did the Rockhopper livery but it’s very good. The aircraft is “Marcel Kuhnt’s “ excellent Islander, and the panel is from “Jean-Pierre Langer” with the gauges by “Arne bartels” Enjoy your flying, all we really need now is a half decent Channel Islands Scenery. Ian Roussel. 30MB

P3D V3 & 4/ FSX Native Boeing 777X (777-9) Boeing Business Jets Package with New Virtual Cockpit and working FMC (updated). The Boeing Business Jet (BBJ) series are variants of Boeing jet airliners for the corporate jet market, initially the 737 series airliners. The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model blended with Ken Wiggington's work on the default 737 VC to make it more resemble a 787 and possibly the new 777-9X! This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. There are custom Boeing sounds included for that extra realism. The great native FSX Skyspirit model features opening doors & cargo doors, detailed textures, accurate paint, dynamic shine & effects, dynamic flexing wings that respond to turbulence, fully independent suspension, trim animation, gear steering, accurate flight dynamics, spoiler animation, reflective cockpit windows, crash effects, animated tilting bogies, full night lighting, stairs, ground service vehicles when cargo doors open, (FSX - Go to Views - Instrument Panel -Posky Util), detailed virtual cockpit and more. Added custom B777 sounds. To use FMC - Go to Views - Intrument panel - FMC. See FMC docs. Fantastic native FSX model by Skyspirit/Project Opensky. Jetway exits and wheel sink fixed. I have included the fine textures by unknown. Zip preview for images. Prepared, tested and assembled for FSX P3D v 3 & 4 by Chris Evans. Previous version had 6420 downloads