FS98 1977 Piper Cherokee Six 300, Rework of Eric Johnson's AFX. Full moving parts, Transparent windows and full lights. Modified version of the Lance Panel without the gear handle, Dragon Flight start and light switches. This one is for those who like the Lance, but don't want or need a retractable gear. By Dana McGee. 1.9MB

FSX/P3D (all versions) Boeing 747-400 British Airways Package (v2). BA is based at Heathrow and Gatwick airports and is the UK's 2nd largest airline after Easyjet. As of July 2018, British Airways operate 36 Boeing 747-400. Assembled and edited for FSX with Enhanced VC from Alejandro Rojas Lucenda. Thank you to Skyspirit for their wonderful models. High quality textures by Xudeva Irribarra . Project Opensky Boeing 747-400 assembled and upgraded for FSX with the upgraded Boeing 747 internal cockpit (VC) from Alejandro Rojas Lucenda (Manual included). This is the Project Opensky FSX native Boeing 747-400F model, and includes ground cargo servicing, stairs (FSX - Go to Views - Instrument Panel -Posky Utility. P3D go to Vehicle - Instrument Panel -). Added wing views. Fix levels. Included CF engine sounds from BrandonG, with realistic jet whine to make your flight sound great. Thank you to Project Opensky for their contributions to the worldwide community of flight simulation. Also includes the Boeing 747 VC textures upgrade. This give a much clearer 747 interior virtual cockpit look. Zip preview for larger pictures. Assembled and edited for P3D 3 / 4 & FSX by Chris Evans. Previous version had 10,600 d/ls

FS2004 Piper PA-28-180 Cherokee. Presented in red and white livery. Original aircraft by Microsoft. Repainted by 'esseresse'. 944K

FSX///US Airways Airbus A330-300 CLS (N178AY). The new US Airways livery 32 Bit Textures for CLS payware model. You must have the payware CLS A330 package to use the textures. Enjoy! --Repaint by Faisal Nahian

FSX-FS2004 Spitfire MkIXc/IXe The Spitfire Mk IX was originally developed as a stopgap measure in response to the appearance of the Focke-Wulf FW 190A. In July 1942 an early Mk IX was flown against a captured Fw 190A, and the two aircraft were discovered to have very similar capabilities. The RAF had its answer to the Fw 190 problem. You get two variants with working VC ; ZD-B is still flying today at many airshows and JE-J was flown by Johny Johnson, the most successful British WW2 ace. Tested in FS2004/FSX/FSX Acceleration, Windows 7/8. GMAX model by A.F.Scrub.

FSX/FS2004 Rostock - Laage Airport, Germany. This is the base of German Eurofighter. This scenery has over 150 objects, forest, airportsstreets and more. objects and textures by www.afs-design.de - Author: A.Meyer. 1.5MB

FSX - General Aviation -- Aeroworks ARX-6 Roadrunner - Version 2 The ARX-6 is a single-place Formula One pylon racing aircraft and is built to the specs of the International Formula 1 Air Racing association. Like all Formula One race planes, it is built around the Continental O-200. This is the same 100hp engine that barely powers a Cessna 150 to 100kts but on the small extremely lightweight and aerodynamic airframes of formula one racers the top aircraft can push 300mph. With very few instruments, and less than average ground handling, Formula One aircraft are very clean "no frills" machines that serve only one purpose - flying low, flying fast, and turning left. This all-new package created specifically for FSX includes 14 different schemes, custom sounds and panel. Aircraft and panel by Jason L. Terry. Sounds by Joseph Thompson. Additional schemes by Joshua B. Nyhus, Brady Duros and Mike Vivaldi

FS2004, St. Kitts International Airport, Island of St. Kitts, Caribbean Region...TKPK This scenery depicts the Robert L. Bradshaw International airport on the Island of St. Kitts in the Caribbean. It contains the modern new terminal, along with the distinctive green glass tower, and outer buildings. It is a small airport which is located in a valley between two mountain ranges near the southern end of the Island. The scenery has been updated to work in FS2004 by changing the location slightly, removing the hills which are no longer necessary, since FS has now done a great job with the new terrain. The tarmac area is now more representational of the airport, since the scenery tarmacs now override the default FS tarmacs, taxiways, and lines. The airport now has a cleaner layout, and the taxiway extending to the runway end now fits in perfectly. More trees have been added to prvent the stark look of the old scenery. This airport needs an afcad, since there are some A1 aircraft which park in the middle of the taxiway. This scenery will not work in FS2002. By: Bill Melichar. 3.7MB

FS2004/2002 Vans Rv4 Soon after the single-seat RV-3 was introduced, it became obvious that a lot of people wanted to share their RV Grin with a friend. Van realized that he wasn't going to be able to talk them into building two RV-3s. He set out to design a two-place airplane that performed and handled as much like the RV-3 as possible. This was not as easy as just "stretching the RV-3." FSDS2 model with full moving parts, reflective textures, custom panel using default gauges, dynamic glare, accurate FDE's Model&Textures: Felipe Belalcazar, Panel:Warren Wright FDE's:Craig Bielat. 1.2MB Filename: VansRv4.zip FS2004/2002 Vans Rv4 Updated model file for my Vans Rv4 previously released. this update fixes the canopy and gives it a more realistic glass kind'a look. thnx to rick piper for showing me how to achieve this! the complete aircraft is needed for this udate to work, above by:Felipe Belalcazar3.7MB See update here

P3D/FSX Boeing 767-200ER Continental Airlines package with VC for FSX Continental merged with United Airlines in 2010 and at that time was operating 8 Boeing 767-200ER aircraft. FSX model by Skyspirit. With advanced FSND 737-800 VC added. Includes utility for ground services, cargo, stairs, etc (find it under - Views - Instrument panel - Posky Utility) The wonderful creation from Project Opensky will be enjoyed by many more people who do not know how to install a VC, views, exits, Utilities etc into a FSX native model. So now this 767-300 has the nearest VC I can find -- the 737-800. The layout of the 767 cockpit is similar to the advanced 737-800. The VC is the Alejandro Rojas Lucena/FSND fantastic revised Boeing 737-800 VC model. This VC model includes Working wipers (right mouse click on switch) with rain effect. Switches for LCD Screens, EICAS, PFD, MFT. Autobrake switch. Opening pilots window. Cabin Lights switch. Realistic FMC. Ground Proximity Warning System (GPWS), More Realistic night VC textures. There are custom Boeing sounds included for that extra realism. I have used the great textures by Joe Shimmel. Also added 767 sounds for more realism. Also added 767-200 exits cfgs so jetways can be used (Ctrl J). Removed 'Too low, pull up' calls. Posky wonderful native FSX Boeing 767-300 models. See VC docs to get the best out of the VC and FMC. Prepared and assembled for FSX by Chris Evans