Nov 16, 2026 |
All Time Popular > Page 976
 
 
 
FS2002/FS2004
                  McDonnell FH-1 Phantom.
FS2002/FS2004 McDonnell FH-1 Phantom. (Category: FS2004 > Military)
1.60Mb (3665 downloads)
FS2002/FS2004 McDonnell FH-1 Phantom. This was the first all-jet airplane ordered into production by the Navy. A new form to bury the J30 engine under the root of the both wings that was on earth manufactured with the body was adopted. And, a straight line main wing and the horizontal tail with a strong dihedral angle were combined with a thin body. Though the maximum speed achieved 770 km/h, because rising performance and the practicality, etc. are low, only 60 planes were manufactured and it ended. The first all-jet squadron aboard a carrier was operational with FH-1 Phantoms on the USS Saipan. by Kazunori Ito 1.6MB
Posted Jun 23, 2008 14:27 by archive
 
FS2002/2004
                  EMB-201A Ipanema Cropduster Civil Textures Pack
16.45Mb (3665 downloads)
FS2002/2004 EMB-201A Ipanema Cropduster Civil Textures Pack - This pack has 6 new paints, new sounds and the "smokesystem" (pressing "i") for the Ipanema model for FS2002 and 2004 ( Fs9 ) made by Denis da Silva e Daniel da Silva.(required here).Upgrade by Igor Mendes Bueno. 16.4MB
Posted Sep 8, 2009 23:29 by archive
 
FSX
                  Horten Ho-229v3
FSX Horten Ho-229v3 (Category: FSX > Vintage)
16.91Mb (3664 downloads)
FSX Horten Ho-229v3 The Horten Ho-229 was a World War II prototype flying wing fighter/bomber. Designed by Reimar and Walter Horten and powered by two Jumo 004B turbojets it was built to carry a 1,000 kg load for 1,000 km at 1,000 km/h. This is an updated version with 6 skins and visual model from Kazunori Ito’s FS 2004 Ho229ab version and flight model from Jay McDaniel/Scott Gentile CFS3 ho_229v5 version. It has been adapted to FSX with a new instrument panel and gauges based on original Ho-229 photographs (no VC). Integration and gauges by Fred Highland. 16.9MB
Posted Jun 23, 2008 14:16 by archive
 
FSX/P3D Beechcraft AT-11 KANSAN Package
FSX/P3D Beechcraft AT-11 KANSAN Package
FSX/P3D Beechcraft AT-11 KANSAN Package (Category: FSX > Vintage)
165.93Mb (3663 downloads)
The Beechcraft AT-11 for FSX Native v1.0 Models by Milton Shupe, panel and gauges by Scott Thomas, textures by the late Damian Radice, and Sounds by Nigel Richards. Four models and ten textures included. Damian's Paint kit is available at SOH and Flightsim.
Posted Jul 19, 2017 15:12 by Milton Shupe
 
Jet Engine Rumble Replacement Sounds
Jet Engine Rumble Replacement Sounds (Category: FS Sounds > Flight Simulator Sounds)
2.21Mb (3663 downloads)
This is a high-quality jet engine rumble sound for those soundpacks that have sucky rumble sounds. This sound effect was from some freeware high-quality soundpackage. **Works for any type of rumbling sound from the engines (I'd recommend airliners). Should work for reverse thrust too! :D**
Posted Jul 6, 2012 18:15 by Brandon G.
 
Acceleration P-51D Polished Textures
Acceleration P-51D Polished Textures (Category: FSX > Vintage)
6.04Mb (3663 downloads)
This is a repaint of the FSX Acceleration P-51D Racer. It is in the stock roll-out scheme of P-51's as they would look coming off the assembly line in 1944 or 1945. Enjoy!
Posted Nov 25, 2008 20:24 by Marshall Carter
 
FSX/P3D Hazard objects for CZ, SK, AT, LU, FR & BE
FSX/P3D Hazard objects for CZ, SK, AT, LU, FR & BE
10.79Mb (3662 downloads)
This package will place into your FSX / Prepar3D hazard objects (chimneys, antennas, windmills, TV towers...) as listed in the ENR 5.4 section of the Czech, Slovak, Austrian, Luxembourgish, French, and Belgian AIPs. These objects are usually depicted also on VFR 1:500 000 aeronautical charts of these countries.
Posted Jun 21, 2015 03:49 by Milan Smid
 
FS2002/
                  2004 Hummelbird SAA-VA repaint version.
1.02Mb (3662 downloads)
FS2002/ 2004 Hummelbird SAA-VA repaint version. This is an all-aluminium homebuilt aircraft powered by a half VW engine. It is a marvelous aeroplane that flies like magic. It was designed by Morrey Hummel. I bought one and I have flown about 80 hours on it. It is stable, fast, inexpensive, easy to maintain, almost too good to be true. This model was built by Newton Drumond with a little help from Fern Marques (me), and I can tell you that it flies just like the real one! It features all moving parts, and the panel texture is a photo of my real one. Sound is the Sopwith Camel, very similar to a VW cut in half, indeed. Just unzip into any temporary folder and move to your "Aircraft" folder. 1MB
Posted Aug 24, 2009 06:44 by archive
 
Project Airbus A380-800 IranAir Package
Project Airbus A380-800 IranAir Package
Project Airbus A380-800 IranAir Package (Category: FSX > Civil Jets)
67.36Mb (3661 downloads)
Project Airbus A380-800 in the colours of IranAir. Model by Project Opensky, Thomas Ruth & Luis Quintero. Repaint by Jacques Louw
Posted Jan 30, 2016 02:25 by Jacques Louw
 
Weapons.doc (Category: CFS2 > Misc)
(3661 downloads)
Weapons.doc is meant as a Weapons help file/ DP tutorial and was written in Word. Michael Dennis Starr. 11K
Posted Jun 10, 2008 11:09 by archive